Page 1 of 5
Page 2 of 5
Text on page 3
3” Locking Casters (for Front)
3” Casters (for Back)
To Assemble:
- Identify and Separate all the Parts and Hardware.
- Place the Top Platform (P-4) with the insert nuts facing up. Attach 2 Upper Inserts (P-5) using 4 Flat Head screws (A) as shown in illustration # 1.
(Do not tighten the screws all the way).
Page 3 of 5
Text on page 4
Assembly Diagram
- Attach 1 Stability Panel (P-2) and 1 Stability Panel (P-3)to 2 Leg Frames (P-1) using 8 Flat Head screws (H) and 8 Interior Threaded Posts (B) as shown in illustration # 2.
- Attach 2 Locking casters (C) in the front and 2 Casters (D) in the back. Tighten the Casters using Caster Wrench (F)]
- Attach Laptop Platform (P-6) to 2 Leg Frames (P-1) using 4 Flat Head screws (A).
Page 4 of 5
Text on page 5
6. Slide the Top Assembly into the Leg Assembly and secure at desired height using 2 Knobs
(G) as shown in illustration # 3.
7. Tighten all screws securely using Allen Wrench (E).
Top Assembly
Leg Assembly
WWW.MYBINDING.COM
Page 5 of 5 · End of manual
Quick start
- Identify and separate all parts and hardware.
- Place the Top Platform (P-4) with the insert nuts facing up and attach 2 Upper Inserts (P-5) with 4 Flat Head screws (A). Do not tighten them all the way.
- Attach Stability Panels (P-2) and (P-3) to the 2 Leg Frames (P-1) with 8 Flat Head screws (H) and 8 Interior Threaded Posts (B).
- Attach 2 Locking casters (C) at the front and 2 Casters (D) at the back; tighten with the Caster Wrench (F).
- Attach the Laptop Platform (P-6) to the leg frames with 4 Flat Head screws (A).
- Slide the top assembly into the leg assembly, secure it at the desired height with the 2 Knobs (G), and tighten all screws with Allen Wrench (E).
