Best-Rite 505-4 Assembly Instructions, page 1

Page 1 of 3

Best-Rite 505-4 Assembly Instructions, page 2
Text on page 2

BESTBITE-12-NL

Part List

Hardware List

Should you require assistance during assembly, please call our Customer Service Department Monday- Friday 8 a.m.-5 p.m. CST 1-800-749-2258

Page 2 of 3

Best-Rite 505-4 Assembly Instructions, page 3
Text on page 3

There are Two Ways to Install Your New Best-Bite.

Option One

Bes t Bi te L oca tion C

2. Install two Screw Anchors(C) and two Mounting Brackets(A) using two Screws (B).

1. Locate and Drill 2 pilot holes using 1/4” drill bit.

3. Snap the Best-Bite (P1) over the Plastic Bracket (A) as shown in Illustration #3.

Option Two

Peel off protection paper from one side of Double Sided Tapes (E). See Illustration #4

2. Wipe off the back of Best-Bite (P-1) to remove all particles. Place the tape’s peeled sides on to the back of the unit in even spaces, and remove the other protection paper from the Double Sided Tapes (E). See Illustration #5.

Protection Paper

Protection Paper

Wipe off the surface where Best-Bite(P1) will be installed. Press the unit with the exposed Double Sided Tape against the wall surface. See Illustration #6.

WWW.MYBINDING.COM

Page 3 of 3 · End of manual

Quick start

  1. Option one (brackets): Mark the location and drill 2 pilot holes with a 1/4" drill bit.
  2. Option one: Install the 2 screw anchors, then fasten the 2 mounting brackets with 2 screws.
  3. Option one: Snap the Best-Bite over the plastic brackets.
  4. Option two (tape): Peel the protection paper off one side of the double-sided tapes.
  5. Option two: Wipe the back of the Best-Bite clean, press the tapes on in even spaces, then peel off the remaining protection paper.
  6. Option two: Wipe the wall surface clean and press the unit firmly against it.

Frequently asked questions

Can I install the Best-Bite without drilling?

Yes. Option two uses the supplied double-sided tape: clean the back of the unit and the wall, apply the tapes in even spaces, and press the unit onto the wall. See page 3.

What size drill bit do I need for the bracket method?

Drill the 2 pilot holes with a 1/4" drill bit, then install the screw anchors and mounting brackets. See page 3.

Who do I call for help with assembly?

Call Best-Rite Customer Service at 1-800-749-2258, Monday to Friday, 8 a.m. to 5 p.m. Central time.