Page 1 of 2
Text on page 2
506 & 507
Display Panel Installation
Step 1.) Establish mounting location on your wall.
Step 2.) Fasten “L” clips with long screws (and plastic anchors for your type wall) to the wall so that the Display Panel fits between them as shown in the above illustration.
Step 3.) Place the Display Panel between the “L” clips and center up and down. Use the small self-drilling screws to go through the “L” clip’s hole and into the panel’s side frame.
Missing Parts or UPS Damaged Parts For Your Convenience you can EMAIL us at
24HOURS 7 DAYS A WEEK
Should you require assistance during assembly, please call our Customer Service Department Monday - Friday 8 a.m. - 5 p.m. Central Standard Time 1-800-749-2258
506, 507_4-17-12
WWW.MYBINDING.COM
Page 2 of 2 · End of manual
Quick start
- Choose the mounting location on your wall.
- Fasten the "L" clips to the wall with the long screws, using plastic anchors suited to your wall type, so the display panel fits between them.
- Place the display panel between the "L" clips and center it up and down.
- Drive the small self-drilling screws through the hole in each "L" clip and into the panel's side frame.
Frequently asked questions
How does the display panel attach to the wall?
Two "L" clips are screwed to the wall so the panel fits between them. Small self-drilling screws then go through each clip into the panel's side frame. See page 2.
Do I need anchors for my wall?
The sheet says to use the long screws with plastic anchors for your type of wall when fastening the "L" clips. See page 2.
What should I do about missing or damaged parts?
Call Best-Rite Customer Service at 1-800-749-2258, Monday to Friday, 8 a.m. to 5 p.m. Central time. The sheet also offers email support around the clock for missing parts or parts damaged in shipping.
