Page 1 of 7
Page 2 of 7
Text on page 3
WOW
Euro Reversible
Should you require assistance during assembly, please call our Customer Service Department Monday - Friday 8 a.m. - 5 p.m. Central Standard Time
Toll-Free Customer Service
Page 3 of 7
Text on page 4
Euro Reversible
Assembly Diagram
R EAD T HROUGH I NSTRUCTIONS FROM BEGINNING
TO END BEFORE STARTING TO ASSEMBLE UNIT .
- To Assemble:
Identify and Separate all the Parts and Hardware.
- Install Cross bar (P-4) to the Legs (P-1) and (P-2) by using Socket Screws (A). Tighten with Allen Wrench (F). See illustration # 1.
- Insert locking casters (E) with Caster Lock Washer (B)to the bottom of each Legs (P-1) and (P-2) and tighten using Caster Wrench(G). See illustration #2.
Missing Parts or UPS Damaged Parts For Your Convenience you can EMAIL us at
24HOURS 7 DAYS A WEEK
Page 4 of 7
Text on page 5
4. Detach 2 screws from each side of Framed Board (P-5) with Phillips Screwdriver as shown in illustration # 3.
5. Install Flange (C) on each side of the board by using the same 4 screws from
step 5 and tighten with Phillips Screwdriver. See illustration # 4.
Do not use unless all screws are tight. At least every six months, check all screws to be sure they are tight. If parts are missing, broken, damaged, or worn, stop use of the product until repairs are made by your dealer using factory authorized parts.
Page 5 of 7
Text on page 6
Euro Reversible
- Separate the Legs (P-1) and (P-2) slightly in order to insert the flange bolts through the flanges on legs. Fasten the Knobs (D) to secure the board in place. See illustration # 5.
- Assemble Tray (P-3) to the legs with using Socket Screws (A) and tighten with Allen Wrench (F). See illustration # 6.
WWW.MYBINDING.COM
Page 6 of 7
Page 7 of 7 · End of manual
Quick start
- Read all the instructions first, then identify and separate the parts and hardware.
- Attach the cross bar to both legs with the socket screws and tighten with the Allen wrench.
- Fit a caster lock washer on each locking caster, insert the casters into the bottom of each leg and tighten with the caster wrench.
- Remove 2 screws from each side of the framed board with a Phillips screwdriver.
- Fit a flange on each side of the board using the same 4 screws.
- Spread the legs slightly, insert the flange bolts through the flanges on the legs and fasten the knobs to hold the board in place.
- Attach the tray to the legs with the socket screws and tighten with the Allen wrench.
Frequently asked questions
What tools do I need to assemble the Euro Reversible?
The steps use an Allen wrench, a caster wrench and a Phillips screwdriver. See page 4 and page 5.
How is the board attached to the stand?
Flanges are screwed to each side of the framed board. The flange bolts then go through the flanges on the legs and are secured with knobs. See page 6.
How often should I check the screws?
Check that all screws are tight at least every six months, and do not use the board unless all screws are tight. See page 5.
