Best-Rite 668AC-HC Assembly Instructions, page 1
Text on page 1

2 Locking Casters (E) and 2 Non-Locking

1 Attach

Casters (F) to Legs (P-1) as shown.

Cross Brace (P-3) to Legs (P-1) using 2

  1. Attach Screws (A).

R EAD T HROUGH I NSTRUCTIONS FROM BEGINNING TO

END BEFORE STARTING TO ASSEMBLE UNIT .

Missing Parts or UPS Damaged Parts For Your Convenience you can EMAIL us at

24HOURS 7 DAYS A WEEK

Tighten Casters using Caster Wrench (G).

3 Remove 2 Screws from each side of Framed Board (P4).

2 Flanges (C) to theFramed Board (P-4)

4 Attach

using 4 Screws removed in Step #3.

#668AC, AF & AG

Page 1 of 2

Best-Rite 668AC-HC Assembly Instructions, page 2
Text on page 2

the frame assembly at the top and insert the Framed Board(P-4) between Legs(P-1) and attach 5 Spread Flanges (C) to the legs using 2 Knobs (D).

6 Assemble Tray (P-2) to Legs (P-1) using 6 Drill Screws (B).

7 Tighten All Screws using a Phillips Screwdriver.

Sh ou l ass d you ass istan requ ir em ce bly dur e ou , ple ing Se r Cus ase rvi ce tome call Mo Dep r art nd m a 8 a y - F ent r . Ce ntr m. - 5 iday al S p tan .m. dar d T ime T

Cus oll-F

r

1-8 tomer ee

00- Serv 749 ice

Do not use unless all screws are tight. At least every six months, check all screws to be sure they are tight. If parts are missing, broken, damaged, or worn, stop use of the product until repairs are made by your dealer using factory authorized parts.

WWW.MYBINDING.COM

Page 2 of 2 · End of manual

Quick start

  1. Read all the instructions first. Attach the 2 locking and 2 non-locking casters to the legs and tighten them with the caster wrench.
  2. Attach the cross brace to the legs with 2 screws.
  3. Remove 2 screws from each side of the framed board.
  4. Attach the 2 flanges to the framed board using the 4 screws you removed.
  5. Spread the frame at the top, insert the framed board between the legs and fasten the flanges to the legs with the 2 knobs.
  6. Attach the tray to the legs with 6 drill screws.
  7. Tighten all screws with a Phillips screwdriver.

Frequently asked questions

Does this mobile board have locking casters?

Yes. It comes with 2 locking and 2 non-locking casters, which you tighten with the caster wrench. See page 1.

How is the tray attached?

The tray fastens to the legs with 6 drill screws. See page 2.

What maintenance does the stand need?

Check that all screws are tight at least every six months. Stop using it if any parts are missing, broken, damaged or worn until they are repaired with factory-authorized parts. See page 2.