Page 1 of 7
Page 2 of 7
Text on page 3
WOW
Should you require assistance during assembly, please call our Customer Service Department Monday - Friday 8 a.m. - 5 p.m. Central Standard Time
Toll-Free Customer Service
Page 3 of 7
Text on page 4
Assembly Diagram
R EAD T HROUGH I NSTRUCTIONS FROM BEGINNING
TO END BEFORE STARTING TO ASSEMBLE UNIT .
- To Assemble:
Identify and Separate all the Parts and Hardware.
- Install Cross bar (P-4) to the Legs (P-1) and (P-2) by using Long Socket Screws (A). Tighten with Allen Wrench (H). See illustration # 1.
- Place Lock Washer (J) on threaded stems of Locking Casters (E) and insert into the bottom of each Leg (P-1) and (P-2) and tighten using Caster Wrench (I). See illustration #2.
Missing Parts or UPS Damaged Parts For Your Convenience you can EMAIL us at
24HOURS 7 DAYS A WEEK
Page 4 of 7
Text on page 5
- Detach 2 Screws from each side of Framed Board’s brackets (P-5) with Allen Wrench (H) as shown in illustration # 3.
- Install Flange (C) on each side of the board using the same Screws from Step 4 and tighten with Allen Wrench (H). See illustration # 4.
Do not use unless all screws are tight. At least every six months, check all screws to be sure they are tight. If parts are missing, broken, damaged, or worn, stop use of the product until repairs are made by your dealer using factory authorized parts.
Page 5 of 7
Text on page 6
- Separate the Legs (P-1) and (P-2) slightly in order to insert the Flange (C) bolts on sides of Framed Board (P-5) through the flange hole on each legs. Fasten the Knobs (D) to secure the board in place. See illustration # 5.
- Assemble Tray (P-3) to the Legs (P-1) and (P-2) with using 4 Short Socket Screws (B) and tighten with Allen Wrench (H). See illustration # 6.
Ba ck V iew
Page 6 of 7
Page 7 of 7 · End of manual
Quick start
- Read the instructions through, then identify and separate all parts and hardware.
- Install the Cross Bar (P-4) to the Legs (P-1) and (P-2) with Long Socket Screws (A) and tighten with the Allen Wrench (H).
- Put a Lock Washer (J) on the stem of each Locking Caster (E), insert the casters into the bottom of each leg and tighten with the Caster Wrench (I).
- Remove 2 screws from each side of the Framed Board's brackets (P-5) and use the same screws to install a Flange (C) on each side.
- Spread the legs slightly, pass the flange bolts through the flange hole on each leg and fasten the Knobs (D) to hold the board.
- Attach the Tray (P-3) to the legs with 4 Short Socket Screws (B) and tighten with the Allen Wrench (H).
Frequently asked questions
What tools are needed to assemble the 669RH-FD?
The Allen Wrench (H) for the socket screws and the Caster Wrench (I) for the casters (page 4).
How do I install the casters?
Place a Lock Washer (J) on the threaded stem of each Locking Caster (E), insert it into the bottom of the leg and tighten with the Caster Wrench (I) (page 4).
How is the board held in the frame?
Flanges (C) are screwed to each side of the board's brackets, their bolts go through the holes in the legs, and Knobs (D) secure the board (page 5, page 6).
How often should I check the screws?
Only use it when all screws are tight, and check every screw at least every six months. If parts are missing, broken, damaged or worn, stop using it until your dealer repairs it with factory-authorized parts. (page 5)
