Page 1 of 5
Text on page 2
Best-Rite
“Its A Better Board”
1 1/2” Socket Screw
Should you require assistance during assembly, please call our Customer Service Department Monday - Friday 8 a.m. - 5 p.m. Central Standard Time
Toll-Free Customer Service
Page 2 of 5
Text on page 3
Assembly Diagrams
R EAD T HROUGH I NSTRUCTIONS FROM BEGINNING
TO END BEFORE STARTING TO ASSEMBLE UNIT .
To Assemble:
1. Identify and Separate all the Parts and Hardware.
2. Attach Top Cross Bars (P-3) to Right Legs (P-
4) and Left Legs (P-5) by using 1 1/2” Socket Screws (A). Make sure the Cross bar channels lines up with Leg channels. Tighten with Allen Wrench (F) as shown in illustration # 1.
3. Insert Side Hinges (P-9) by using 1/2” Socket Screws (B) place Flat Washers (C) between Side Hinges (P-9) on Left and Right Legs (P-4), (P-5) as shown in illustration # 2.
Missing Parts or UPS Damaged Parts For Your Convenience you can EMAIL us at
24HOURS 7 DAYS A WEEK
Page 3 of 5
Text on page 4
- Slide Flannel Board (P-1) and White board (P-2) through the Right legs (P-4) and Left Legs (P-5) side Channels as shown in illustration # 3.
- Insert the Bottom Cross Bars (P-6) over the Bottom of the Flannel Board (P-1) and and White board (P-2) fasten by using Socket Screws (A). Tighten with Allen Wrench (F) as shown in illustration # 4.
- Install 4-2” Locking Casters (D) on the bottom of legs. Tighten by using Caster Wrench (E) as shown in illustration # 5.
Do not use unless all screws are tight. At least every six months, check all screws to be sure they are tight. If parts are missing, broken, damaged, or worn, stop using the product until repairs are made by your dealer using factory authorized parts.
Page 4 of 5
Text on page 5
- Place Middle Tray (P-8) by tilting to one side then sliding it over the top of Side Hinges (P-9) and lay flat. To fold this unit you must remove the Middle Tray (P-8). Place Big Book Holder (P-7) over Magnetic Boards (P-1) or (P-2) as shown in illustration # 6.
WWW.MYBINDING.COM
Page 5 of 5 · End of manual
Quick start
- Identify and separate all parts and hardware.
- Attach the Top Cross Bars (P-3) to the Right Legs (P-4) and Left Legs (P-5) with 1 1/2" Socket Screws (A), lining up the channels, and tighten with the Allen Wrench (F).
- Insert the Side Hinges (P-9) with 1/2" Socket Screws (B), placing Flat Washers (C) between the hinges and the legs.
- Slide the Flannel Board (P-1) and Whiteboard (P-2) down the side channels of the legs.
- Fit the Bottom Cross Bars (P-6) over the bottom of the boards and fasten with Socket Screws (A).
- Install the 4 2" Locking Casters (D) and tighten with the Caster Wrench (E).
- Tilt the Middle Tray (P-8) and slide it over the side hinges so it lies flat, then place the Big Book Holder (P-7) over a board.
Frequently asked questions
How do I fold the 749M?
You must remove the Middle Tray (P-8) before the unit can be folded (page 5).
What boards come with this easel?
A Flannel Board (P-1) and a Whiteboard (P-2), which slide into the leg channels (page 4).
What kind of casters does it use?
Four 2" Locking Casters (D), tightened with the Caster Wrench (E) (page 4).
How often should I check the screws?
Only use it when all screws are tight, and check every screw at least every six months. If parts are missing, broken, damaged or worn, stop using it until your dealer repairs it with factory-authorized parts. (page 4)
