Text on page 1
Parts List
Storage Wheasel
2 Crossbraces (P4) Through Nylon
1 Insert
Shelf(P3) as shown
Hardware List
Screw M6 X 46mm
Screw M6 X 20mm
Interior Threaded Post M6 X 18mm
Page 1 of 4
Text on page 2
4 Crossbraces (P4) to the Leg Assemblies (P2)
2 Attach
using eight Screws (A).
3 Use Allen Wrench (F) to tighten Screws.
S EE D ETAIL A-1
D ETAIL A-1
4 Locking Casters(E)).
4 Install
Use Caster Wrench (G) to tighten casters.
5 Attach Markerboard (P1).
Tighten screws using Allen Wrench (F).
Page 2 of 4
Text on page 3
6 Attach Wire Rack (P5).
6A. Peel the paper off from the back of adhesive pad on Plastic Chart Support (H). Insert the 2 pins on the backside of the Chart Support (H) in the holes in the markerboard (P-1), as shown in Illustration # 6 and # 6-A. Firmly press the Plastic Chart Support
(H) to the Writting Surface.
Adhesive Pad
7 Insert 4 StorageTubs (P6).
Page 3 of 4
Text on page 4
Storage Wheasel w/markerboard in upper position.
Storage Wheasel
Mobile Easel with Storage Tubs
Storage Wheasel w/markerboard in lower position.
ace f r Su g n it Wr 29 X
Page 4 of 4 · End of manual
Quick start
- Insert 2 Crossbraces (P4) through the Shelf (P3) as shown.
- Attach the 4 Crossbraces (P4) to the Leg Assemblies (P2) using eight Screws (A) and tighten with the Allen Wrench (F).
- Install 4 Locking Casters (E) and tighten with the Caster Wrench (G).
- Attach the Markerboard (P1) and tighten the screws with the Allen Wrench (F).
- Attach the Wire Rack (P5).
- Peel the backing off the adhesive pad on each Plastic Chart Support (H), insert its 2 pins into the holes in the markerboard and press it firmly to the writing surface.
- Insert the 4 Storage Tubs (P6).
Frequently asked questions
Can the markerboard height be changed?
Yes. The manual shows the Storage Wheasel with the markerboard in an upper and a lower position (page 4).
How do the plastic chart supports attach?
Peel the paper off the adhesive pad, insert the 2 pins on the back into the holes in the markerboard and press the support firmly onto the writing surface (page 3).
What screws are included?
The hardware list shows M6 x 46mm and M6 x 20mm screws plus M6 x 18mm interior threaded posts (page 1).
