Page 1 of 4
Page 2 of 4
Text on page 3
#759M, 770 Wheasel
Should you require assistance during assembly, please call our Customer Service Department Monday - Friday 8 a.m. - 5 p.m. Central Standard Time
Missing Parts or UPS Damaged Parts For Your Convenience you can EMAIL us at
24HOURS 7 DAYS A WEEK
Page 3 of 4
Text on page 4
Insert 4 STARTING StorageTubs TO (P6). R EAD T HROUGH I NSTRUCTIONS FROM BEGINNING TO END BEFORE ASSEMBLE UNIT .
To Assemble:
1.) Identify and Separate all the Parts and Hardware.
2.) Attach 4 Locking Casters (C) the Bottom of the 2 Legs (P-1) . Tighten casters using Caster Wrench (E). See
Attach Markerboard Panel (P-2) to the 2 Legs (P-1) using 4 Screws (A), 4 Washers (G) and 4 Threaded Posts (B) as shown in Illustration # 2 . Make sure to place the Washers (G) between the Marker Board and the Leg. Tighten all Screws using Allen Wrench (F).
4.) Hook the Bottom Tray (P-3) over the two horizontal brace tubes on both Welded Legs (P-1) as shown in Illustration # 3.
5.) Repeat Step 3 to attach the second Markerboard Panel (P-2) to the other side of the Welded Legs (P-1).
Page 4 of 4 · End of manual
Quick start
- Identify and separate all parts and hardware.
- Attach 4 Locking Casters (C) to the bottom of the 2 Legs (P-1) and tighten with the Caster Wrench (E).
- Attach a Markerboard Panel (P-2) to the legs with 4 Screws (A), 4 Washers (G) and 4 Threaded Posts (B), with the washers between the board and the leg. Tighten with the Allen Wrench (F).
- Hook the Bottom Tray (P-3) over the two horizontal brace tubes on the welded legs.
- Attach the second Markerboard Panel (P-2) to the other side of the legs the same way.
- Insert the 4 Storage Tubs (P6).
