Page 1 of 7
Page 2 of 7
Text on page 3
WOW
Nest Easel
Adjustable Height Easel w/Storage Bin
Hardware List
2” Locking Caster(for front) 2 EA
Page 3 of 7
Text on page 4
Nest Easel
Assembly Diagram
R EAD T HROUGH I NSTRUCTIONS FROM BEGINNING
TO END BEFORE STARTING TO ASSEMBLE UNIT . To Assemble:
- Identify and Separate all the Parts and Hardware.
- Attach Middle Tray (P-3) to 2 Lower Legs (P-1) at desired height using 2 Socket Screws (B) as shown in illustration # 1.
- Attach 2 each Upper Legs (P-2) to the 2 each Lower Legs (P-1) using 4 Socket Screws (A) as shown in illustration # 2.
Page 4 of 7
Text on page 5
- Insert Markerboard (P-5) into Middle Tray (P-3) as shown in illustration # 3.
- Slide Top Support (P-4) over Markerboard (P-5) and secure to the 2 Upper Legs(P-2) using 2 each Socket Screws(B) as shown in illustration # 4. (Finger tighten only)
Page 5 of 7
Text on page 6
- Attach Book Rack Front Panel (P-7) and Book Rack Back Panel (P-6)to the 2 Lower Leg Frames (P-1) using 4 Socket Screws (A1) and 4 Interior Threaded Posts (C) as shown in illustration # 5.
- Attach 2 Locking Casters (D) in the front and 2 Casters (E) in the back of the unit as shown in illustration # 5. Tighten the Casters using Caster Wrench (G).
(Tighten all Screws at this time)
- Peel the paper from the back of adhesive pad on Plastic Chart Support (F). (See Illustration # 6-A)
Adhesive Pad
See page 7 for High and Low Book Rack Settings
- Attach 2 Plastic Chart Supports on each side of board: Insert 2 pins on back side of Chart Support (F) through holes in markerboard (P-5) as shown in illustration # 6-B.
- Press Plastic Chart Support (F) firmly to the Markerboard surface.
Page 6 of 7
Text on page 7
Nest Easel
Adjustable Height Easel w/Storage Bin
Dry E 28 rase 3/4 Boa ” X r 40 d Siz 3/4 e ”
Shipping Information 4.8 Cubic Feet 56 lbs .
WWW.MYBINDING.COM
Page 7 of 7 · End of manual
Quick start
- Identify and separate all parts and hardware.
- Attach the Middle Tray (P-3) to the 2 Lower Legs (P-1) at the height you want using 2 Socket Screws (B).
- Attach the 2 Upper Legs (P-2) to the Lower Legs (P-1) using 4 Socket Screws (A).
- Insert the Markerboard (P-5) into the Middle Tray, slide the Top Support (P-4) over it and secure it to the upper legs with Socket Screws (B), finger tight only.
- Attach the Book Rack Front Panel (P-7) and Back Panel (P-6) to the lower leg frames with 4 Socket Screws (A1) and 4 Interior Threaded Posts (C).
- Attach 2 Locking Casters (D) at the front and 2 Casters (E) at the back, tighten them with the Caster Wrench (G), then tighten all screws.
- Peel the backing from each Plastic Chart Support (F), push its pins through the holes in the markerboard and press it firmly to the board (2 on each side).
Frequently asked questions
What size is the board on the 785?
The dry erase board is 28 3/4" x 40 3/4" (page 7).
Is the height adjustable?
Yes. The Middle Tray (P-3) is attached to the lower legs at the height you choose, and the book rack has high and low settings (page 4, page 6).
Do the casters lock?
The 2 front casters (D) are locking; the 2 back casters (E) are standard (page 6).
What is the shipping weight?
4.8 cubic feet and 56 lbs (page 7).
