Best-Rite 786 Assembly Instructions, page 1

Page 1 of 4

Best-Rite 786 Assembly Instructions, page 2
Text on page 2

ECO-Wheasel

Foldable Easel on Wheels

Marker Board (wide leg)

Marker Board (narrow leg) 1 EA

Hardware List

1 1/4” Socket Screw

Tool required: Adjustable Crescent Wrench

Page 2 of 4

Best-Rite 786 Assembly Instructions, page 3
Text on page 3

ECO-Wheasel

Assembly Instructions

R EAD T HROUGH I NSTRUCTIONS FROM BEGINNING

TO END BEFORE STARTING TO ASSEMBLE UNIT .

To Assemble:

  1. Identify and Separate all the Parts and Hardware.
  2. Assemble Legs (P-1) and (P-2) at the top by using 2” Socket Screws (A). Place the Flat Washer (E) in between the legs and finger tighten the Lock Nut (F) at this time. See illustrations # 1 and 1a. P-1

Assemble Side Hinges (P-3) by using 1 1/4” Socket Screw (B). Place the Flat Washer (E) in between the Side Hinge (P-3) and legs and fasten from inside with Lock Nut (F). Tighten by holding the Lock Nut (F) with the Adjustable Crescent Wrench and turn the 1 1/4” Socket Screw (B) with Allen Wrench (H). See illustrations # 2.

  1. Assemble Casters (G) by turning the unit to it’s side and fasten by using Caster Wrench (I). See illustrations # 3.

Page 3 of 4

Best-Rite 786 Assembly Instructions, page 4
Text on page 4

5. Assemble Marker Board (P-5) by inserting 5/8” Socket Screw (C) through the Marker Board (P-5) and through the Board Tray (P-4). Insert board and tray through the Leg (P-1). Use the Screw Post (D) from the back of the Leg ((P-1) and tighten by using Allen Wrenches (H). See illustrations # 4.

6. Assemble Marker Board (P-6) by inserting 5/8” Socket Screw (C) through the Marker Board (P- 6), and Board Tray (P-4). Insert board and tray through the Leg (P-2). Use the Screw Post (D) from the back of the leg and tighten with Allen Wrenches (H). See illustrations # 5.

7. Place the Top Shelf (P-7) by simply turning the shelf and sliding through the legs. Top Shelf (P-

7) should rest over the Side Hinges (P-3). To place the Flip Chart Hooks (P-8) simply set the hooks over the top of the Leg (P-1) tube. See illustrations # 6.

8. Tighten all frame Screws and Nuts with Allen

Wrenches and Cresent Wrench before using.

Page 4 of 4 · End of manual

Quick start

  1. Identify and separate all parts and hardware. You also need an adjustable crescent wrench.
  2. Join Legs (P-1) and (P-2) at the top with 2" Socket Screws (A), a Flat Washer (E) between the legs and a Lock Nut (F), finger tight for now.
  3. Attach the Side Hinges (P-3) with 1 1/4" Socket Screws (B), washers and lock nuts, holding the nut with the crescent wrench while turning the screw with the Allen Wrench (H).
  4. Turn the unit on its side and attach the Casters (G) with the Caster Wrench (I).
  5. Mount Marker Board (P-5) with a Board Tray (P-4) on Leg (P-1), and Marker Board (P-6) with a tray on Leg (P-2), using 5/8" Socket Screws (C) and Screw Posts (D).
  6. Slide the Top Shelf (P-7) through the legs to rest on the side hinges and hang the Flip Chart Hooks (P-8) on the Leg (P-1) tube.
  7. Tighten all frame screws and nuts before use.

Frequently asked questions

What tools do I need?

An adjustable crescent wrench, plus the Allen Wrench (H) and Caster Wrench (I) (page 2, page 3).

Where does the top shelf go?

Turn the shelf and slide it through the legs so it rests on the Side Hinges (P-3) (page 4).

When should I fully tighten the frame?

The top lock nut is left finger tight at first. Tighten all frame screws and nuts with the Allen wrenches and crescent wrench before using the easel (page 3, page 4).