Text on page 1
Best-Rite Modifier XV
Adjustable Height Easel - 2 Sided Vinyl Bulletin Board (Silver Frame)
Page 1 of 6
Page 2 of 6
Text on page 3
#795 Modifier XV
Hardware List
Page 3 of 6
Text on page 4
Insert 4 STARTING StorageTubs TO (P6). R EAD T HROUGH I NSTRUCTIONS FROM BEGINNING TO END BEFORE ASSEMBLE UNIT .
To Assemble:
1.) Identify and Separate all the Parts and Hardware.
2.) Attach 2 Locking Casters (C) and 2 Non-Locking Casters (C1) to the Bottom of the 2 Legs (P-1) . Tighten
casters using Caster Wrench (E). See Illustration #1.
Attach the Bottom Cross Bar (P3) in between the two Legs (P1) and secure using one Screw (A) through each Leg as shown in illustration #2. Tighten Screws with Allen Wrench (D).
Page 4 of 6
Text on page 5
4.) Attach five Plastic Receivers (F) to the Legs (P1) using one Phillips Screw Short (B) at the top and one Phillips Screw Long (B1) at the bottom of each as shown in illustration #3.
5.) Hook the Marker Board Panel (P2) into the Plastic Receivers (F) at the height you want. Hook the Plastic Cup (G) into the Plastic Receiver (F) on the outside of the Leg (P1) as shown in illustration #4.
Page 5 of 6
Page 6 of 6 · End of manual
Quick start
- Identify and separate all parts and hardware.
- Attach 2 Locking Casters (C) and 2 Non-Locking Casters (C1) to the bottom of the 2 Legs (P-1) and tighten with the Caster Wrench (E).
- Fit the Bottom Cross Bar (P3) between the legs with one Screw (A) through each leg and tighten with the Allen Wrench (D).
- Attach five Plastic Receivers (F) to the legs, each with a short Phillips screw (B) at the top and a long one (B1) at the bottom.
- Hook the Marker Board Panel (P2) into the receivers at the height you want, and hook the Plastic Cup (G) into a receiver on the outside of a leg.
Frequently asked questions
How do I adjust the board height on the 795AC-VV?
The board panel hooks into Plastic Receivers (F) on the legs, so you set the height by choosing which receivers you hook it into (page 5).
Does it have locking casters?
Yes, 2 Locking Casters (C) and 2 Non-Locking Casters (C1) (page 4).
What tools are needed?
The Caster Wrench (E) and the Allen Wrench (D), plus a Phillips screwdriver for the receiver screws (page 4, page 5).
What is the plastic cup for?
The Plastic Cup (G) hooks into a Plastic Receiver (F) on the outside of a leg (page 5).
