Page 1 of 4
Text on page 2
Wood Conference Cabinet with markerboard/tack surface
Wood Conference Cabinet 1 EA
Should you require assistance during assembly, please call our Customer Service Department Monday - Friday 8 a.m. - 5 p.m. Central Standard Time
Missing Parts or UPS Damaged Parts For Your Convenience you can EMAIL us at
support@moorecoinc.com
Toll-Free Customer Service
24HOURS 7 DAYS A WEEK
Do not use unless all screws are tight. At least every six months, check all screws to be sure they are tight. If parts are missing, broken, damaged, or worn, stop use of the product until repairs are made by your dealer using factory authorized parts.
Page 2 of 4
Text on page 3
Wood Conference Cabinet
Assembly Diagram
R EAD T HROUGH I NSTRUCTIONS FROM BEGINNING
TO END BEFORE STARTING TO ASSEMBLE UNIT .
Note: Beveled edge toward wall
To Assemble:
- Identify and Separate all the Parts and Hardware.
- Locate 3 Wall Studs on the wall where the Cabinet is to be Placed.
- Draw a line where the bottom of the Cabinet should be(36” is the recommended height)
- Locate the 2 each Mounting Boards (P-2) and 6 each Screws (A).
- Attach the first Mounting Board (P-2) 22½” from where the bottom of the cabinet is to be located using 3 each Screws (A).(Be sure board is level)
- Attach the second Mounting Board (P-2) 21¼” from the bottom of the first Mounting Board (P-2) using 3 each Screws (A).(Be sure board is level)
Page 3 of 4
Text on page 4
(This unit weighs over 100 lbs. Two adults are required to hang this unit on the wall.)
- Lift Wall Cabinet (P-1) from the both sides and Hang unit on the 2 each Mounting Boards (P-2) as indicated in illustrations #2,3 & Side Details 4A and 4B .
Side Detail # 4A
Side Detail # 4B
Page 4 of 4 · End of manual
Quick start
- Identify and separate all parts and hardware.
- Locate 3 wall studs where the cabinet will go.
- Draw a line where the bottom of the cabinet should be (36" is the recommended height).
- Attach the first Mounting Board (P-2) 22 1/2" above that line with 3 Screws (A), beveled edge toward the wall. Make sure it is level.
- Attach the second Mounting Board (P-2) 21 1/4" above the bottom of the first one with 3 Screws (A), also level.
- With two adults, lift the cabinet (P-1) by both sides and hang it on the two mounting boards.
Frequently asked questions
How high should I mount the 842C?
36" from the floor to the bottom of the cabinet is the recommended height (page 3).
How many people are needed to hang it?
Two adults. The unit weighs over 100 lbs (page 4).
How far apart are the mounting boards?
The first board goes 22 1/2" above the cabinet's bottom line, and the second goes 21 1/4" above the bottom of the first (page 3).
Does it need to go into studs?
Yes. The instructions say to locate 3 wall studs and fasten each mounting board with 3 screws (page 3).
