Best-Rite Best-Bite Tackless Paper Holder Assembly Instruction, page 1
Text on page 1

BESTBITE-12-NL

Part List

Hardware List

Should you require assistance during assembly, please call our Customer Service Department Monday- Friday 8 a.m.-5 p.m. CST 1-800-749-2258

Page 1 of 2

Best-Rite Best-Bite Tackless Paper Holder Assembly Instruction, page 2
Text on page 2

There are Two Ways to Install Your New Best-Bite.

Option One

Bes t Bi te L oca tion C

2. Install two Screw Anchors(C) and two Mounting Brackets(A) using two Screws (B).

1. Locate and Drill 2 pilot holes using 1/4” drill bit.

3. Snap the Best-Bite (P1) over the Plastic Bracket (A) as shown in Illustration #3.

Option Two

Peel off protection paper from one side of Double Sided Tapes (E). See Illustration #4

2. Wipe off the back of Best-Bite (P-1) to remove all particles. Place the tape’s peeled sides on to the back of the unit in even spaces, and remove the other protection paper from the Double Sided Tapes (E). See Illustration #5.

Protection Paper

Protection Paper

Wipe off the surface where Best-Bite(P1) will be installed. Press the unit with the exposed Double Sided Tape against the wall surface. See Illustration #6.

Page 2 of 2 · End of manual

Quick start

  1. Option one (screws): Drill 2 pilot holes using a 1/4" drill bit.
  2. Install two Screw Anchors (C) and two Mounting Brackets (A) using two Screws (B).
  3. Snap the Best-Bite (P1) over the plastic brackets.
  4. Option two (tape): Peel the protection paper from one side of the Double Sided Tapes (E).
  5. Wipe the back of the Best-Bite clean, place the tapes on it in even spaces and remove the other protection paper.
  6. Wipe the wall surface clean and press the unit firmly against it.

Frequently asked questions

How can I mount the Best-Bite paper holder?

There are two ways: screw it to the wall with the anchors and plastic mounting brackets, or attach it with the double-sided tape that is included (page 2).

What size drill bit do I need?

Use a 1/4" drill bit for the 2 pilot holes (page 2).

Can I install it without drilling?

Yes. Option two uses Double Sided Tapes (E): clean the back of the unit and the wall, apply the tape in even spaces and press the unit onto the wall (page 2).

Who do I call if I need help?

Customer Service at 1-800-749-2258, Monday to Friday, 8 a.m. to 5 p.m. CST (page 1).