Best-Rite Hang Up Board Dry-Erase Markerboard Assembly Instruction, page 1
Text on page 1

Measure the distance between the large holes of the

1 mounting brackets on the back of your board.

2 Locate and Drill holes for Screws or Anchors

the hanging screws as shown below for the

3 Install

type wall you have.

4 Hook the board’s brackets on the Screw heads.

Sheetrock Wall 1/4” Predrill

Measure this distance (A)

Center to Center of large holes

Measure this distance (B)

Top of board to center of hole

Wood Wall 1/8” Predrill

NOTE: Use 1/8” drill for screws Use 1/4” drill for anchors

Distance off floor to top of your board

Leave a 1/4” gap between back of screw head and wall

5 Peel off protective film from the front of the board before using.

Parts List

Should you require assistance during assembly, please call our Customer Service Department Monday - Friday 8 a.m. - 5 p.m. Central Standard Time

Hardware List

Screw Anchor - Masonry 2 EA

Screw Anchor - Sheetrock 2 EA

Toll-Free Customer Service

Peel off clear protective film.

Hang Up Bopard

Page 1 of 1 · End of manual

Quick start

  1. Measure the center-to-center distance between the large holes of the mounting brackets on the back of the board (A), and from the top of the board to the hole centers (B).
  2. Mark the screw locations on the wall based on how high you want the top of the board.
  3. Predrill: use a 1/8" bit for screws in a wood wall, or a 1/4" bit for anchors in a sheetrock wall.
  4. Install the hanging screws, leaving a 1/4" gap between the back of the screw head and the wall.
  5. Hook the board brackets over the screw heads.
  6. Peel the protective film off the front of the board before using it.

Frequently asked questions

What size hole do I drill for the Hang Up Board?

Use a 1/8" drill for screws and a 1/4" drill for anchors (page 1).

How far should the screws stick out from the wall?

Leave a 1/4" gap between the back of the screw head and the wall.

Which wall anchors are included?

The hardware list shows 2 masonry screw anchors and 2 sheetrock screw anchors.