Best-Rite Platinum Reversible 2 Sided Dura-Rite Markerboard Assembly Instruction, page 1

Page 1 of 6

Best-Rite Platinum Reversible 2 Sided Dura-Rite Markerboard Assembly Instruction, page 2
Text on page 2

WOW

Should you require assistance during assembly, please call our Customer Service Department Monday - Friday 8 a.m. - 5 p.m. Central Standard Time

Toll-Free Customer Service

Page 2 of 6

Best-Rite Platinum Reversible 2 Sided Dura-Rite Markerboard Assembly Instruction, page 3
Text on page 3

Assembly Diagram

R EAD T HROUGH I NSTRUCTIONS FROM BEGINNING

TO END BEFORE STARTING TO ASSEMBLE UNIT .

  1. To Assemble:

Identify and Separate all the Parts and Hardware.

  1. Install Cross bar (P-4) to the Legs (P-1) and (P-2) by using Long Socket Screws (A). Tighten with Allen Wrench (H). See illustration # 1.
  2. Place Lock Washer (J) on threaded stems of Locking Casters (E) and insert into the bottom of each Leg (P-1) and (P-2) and tighten using Caster Wrench (I). See illustration #2.

Missing Parts or UPS Damaged Parts For Your Convenience you can EMAIL us at

24HOURS 7 DAYS A WEEK

Page 3 of 6

Best-Rite Platinum Reversible 2 Sided Dura-Rite Markerboard Assembly Instruction, page 4
Text on page 4
  1. Detach 2 Screws from each side of Framed Board’s brackets (P-5) with Allen Wrench (H) as shown in illustration # 3.
  2. Install Flange (C) on each side of the board using the same Screws from Step 4 and tighten with Allen Wrench (H). See illustration # 4.

Do not use unless all screws are tight. At least every six months, check all screws to be sure they are tight. If parts are missing, broken, damaged, or worn, stop use of the product until repairs are made by your dealer using factory authorized parts.

Page 4 of 6

Best-Rite Platinum Reversible 2 Sided Dura-Rite Markerboard Assembly Instruction, page 5
Text on page 5
  1. Separate the Legs (P-1) and (P-2) slightly in order to insert the Flange (C) bolts on sides of Framed Board (P-5) through the flange hole on each legs. Fasten the Knobs (D) to secure the board in place. See illustration # 5.
  2. Assemble Tray (P-3) to the Legs (P-1) and (P-2) with using 4 Short Socket Screws (B) and tighten with Allen Wrench (H). See illustration # 6.

Ba ck V iew

Page 5 of 6

Best-Rite Platinum Reversible 2 Sided Dura-Rite Markerboard Assembly Instruction, page 6

Page 6 of 6 · End of manual

Quick start

  1. Read the instructions through, then identify and separate all parts and hardware.
  2. Attach the cross bar (P-4) to the legs (P-1, P-2) with the long socket screws (A), tightened with the Allen wrench (H).
  3. Put a lock washer (J) on each locking caster (E) stem, insert it into the bottom of each leg and tighten with the caster wrench (I).
  4. Remove 2 screws from each side bracket on the framed board (P-5), then use them to attach a flange (C) to each side.
  5. Spread the legs slightly, pass the flange bolts through the leg holes and secure the board with the knobs (D).
  6. Attach the tray (P-3) to the legs with 4 short socket screws (B).

Frequently asked questions

What tools are needed to assemble the reversible markerboard?

An Allen wrench (H) and a caster wrench (I), both listed in the hardware (page 3).

How is the board held in the stand?

Flanges on each side of the board pass through holes in the legs and are secured with knobs (page 5).

How often should the screws be checked?

At least every six months. Do not use the board unless all screws are tight (page 4).