Best-Rite Tackboard Display Panel Assembly Instruction, page 1
Text on page 1

506 & 507

Display Panel Installation

Step 1.) Establish mounting location on your wall.

Step 2.) Fasten “L” clips with long screws (and plastic anchors for your type wall) to the wall so that the Display Panel fits between them as shown in the above illustration.

Step 3.) Place the Display Panel between the “L” clips and center up and down. Use the small self-drilling screws to go through the “L” clip’s hole and into the panel’s side frame.

Missing Parts or UPS Damaged Parts For Your Convenience you can EMAIL us at

24HOURS 7 DAYS A WEEK

Should you require assistance during assembly, please call our Customer Service Department Monday - Friday 8 a.m. - 5 p.m. Central Standard Time 1-800-749-2258

Page 1 of 1 · End of manual

Quick start

  1. Choose the mounting location on the wall.
  2. Fasten the L-clips to the wall with long screws (and plastic anchors suited to your wall) so the panel fits between them.
  3. Place the panel between the L-clips, center it, and drive the small self-drilling screws through the clip holes into the panel side frame.

Frequently asked questions

How is the tackboard display panel attached to the wall?

With L-clips on each side, screwed to the wall, and small self-drilling screws into the panel side frame (page 1).