Text on page 1
Dahle Vantage Personal Guillotine Paper Cutter
For Models: Dahle Vantage 12E Dahle Vantage 15E Dahle Vantage 18E
Page 1 of 2
Text on page 2
Users Manual
Vantage Trimmer Models 12E, 15E, 18E
- For use in trimming paper, photographs, and thin cardboard, etc.
- 12” (12E), 15” (15E), 18” (18E) trimming lengths
- Automatic clamping system provides comfortable and safe trimming
- Scale in cm and inches with a ½” grid for easy sizing of material
Safety Instructions
- To avoid injuries, use the trimmer on a solid, level, and secure surface.
- Always secure the blade after use.
- Keep young children away from the trimmer.
- Do not touch the cutting blade with your fingers.
Usage
- The upper blade is fixed into place during non-operation. To release the upper blade gently push to the right approximately ½” and lift up.
- Place the mat backstop to the correct position.
- Press the blade down slowly. The clamp will then automatically hold the material to be cut in place.
- After the cutti to the right ½”, dropping the blade down slightly and then pushing the handle slightly back to the left.
If you have any questions, please call a Customer Service Representative at (800) 243-8145.
North America
375 Jaffrey Road / Peterborough, NH 03458 / Tel: 800.995.1379 / Fax: 603.924.1616 / eMail: info@dahle.com
w w w. dahle . c o m
Page 2 of 2 · End of manual
Quick start
- Set the trimmer on a solid, level and secure surface.
- Release the upper blade by gently pushing it to the right about ½" and lifting it up.
- Set the backstop to the correct position; use the cm/inch scale and ½" grid to size the material.
- Press the blade down slowly. The clamp automatically holds the material in place.
- After cutting, secure the blade by pushing the handle to the right ½", dropping it slightly, then pushing it slightly back to the left.
Troubleshooting
| Problem | Likely cause | Fix (from the manual) |
|---|---|---|
| Upper blade will not lift | The upper blade is fixed into place when not in use. | Gently push the blade to the right approximately 1/2 inch and lift up. Page 2 |
| Trimmer shifts during cutting | The trimmer is not on a solid, level and secure surface. | Use the trimmer on a solid, level, and secure surface. Page 2 |
| Risk of cuts from the blade | Fingers touching the cutting blade. | Do not touch the cutting blade with your fingers. Always secure the blade after use. Page 2 |
| Material is not held while cutting | The blade is moved too fast to engage the clamp. | Press the blade down slowly. The clamp then automatically holds the material in place. Page 2 |
| Children near the trimmer | Young children can be injured by the open blade. | Keep young children away from the trimmer. Page 2 |
Frequently asked questions
What cutting lengths do the Vantage models have?
The 12E cuts 12", the 15E cuts 15" and the 18E cuts 18". See page 2.
What materials can the Vantage trimmer cut?
Paper, photographs and thin cardboard. See page 2.
Do I need to hold the paper while cutting?
No. Pressing the blade down slowly engages an automatic clamp that holds the material in place. See page 2.
