Die Set Selector Guide

Punched Edge Centerline

4:1 Coil Round

48 Holes, Suggested for: LTR and 1/2 LTR

4:1 Coil Oval

47 Holes, Suggested for: A4 and A5

4:1 Coil Oval

48 Holes, Suggested for: LTR and 1/2 LTR

4:1 Coil Round

47 Holes, Suggested for: A4 and A5

3:1 Wire Square

36 Holes, Suggested for All Standard Sizes Spacing:0.3333"(8.47mm) Holes:0.156"(3.96mm) Margin:0.179"(4.55mm)

2:1 Wire Square

23 Holes, Suggested for: LTR and A4

2:1 Wire Square

24 Holes, Suggested for: 1/2 LTR and A5

3:1 Wire Round

36 Holes, Suggested for All Standard Sizes Spacing:0.3333"(8.47mm) Holes:0.171"(4.34mm) Margin:0.168"(4.27mm)

2:1 Wire Round

23 Holes, Suggested for: LTR and A4

2:1 Wire Round

24 Holes, Suggested for: 1/2 LTR and A5

3:1 Wire Square

35 Holes, *Non-Standard Die

3:1 Wire Round

35 Holes, *Non-Standard Die

Comb

21 Holes, Suggested for All Standard Sizes Spacing:0.5625"(14.29mm) Holes:0.313"x0.125"(7.95x3.18mm) Margin:0.200"(5.08mm)

Comb

20 Holes, *Non-Standard Die

Velo

11 Holes, Suggested for LTR, 1/2 LTR and A5 Spacing:1.00"(25.4mm) Holes:0.125"(3.18mm) Margin:0.125"(3.18mm)

Velo

12 Holes, Suggested for: A4

Loose Leaf

Spacing:1.00"(25.4mm) Holes:0.125"(3.18mm) Margin:0.125"(3.18mm) Holes:0.313"(7.95mm) Margin:0.313"(7.95mm)

9 Holes, Suggested for: LTR and 1/2 LTR

Loose Leaf

ISO 838/888

4 Holes, Suggested for: A4 and A5

1/2 LTR

LTR