Easycutter 550 Cutting System Manual, page 1
Text on page 1

AUTOMATIC CUTTING SYSTEM

EASYCUTT ER-550

EASYCUTT ER-550

Full automatic cutter for laminating services & print shops ^ Min. Cutting Length : 100mm ^ Max. Cutting Width : 550mm ^ Cutting Margin : -25~25mm ^ Max. Cutting Speed : 10m/min

CO ST T -E ECO ON OM MIC C CU UTT T ING G SY Y STEM W I TH H EAS SY-O OPERATIION- FO OCU U SE ED D E SIIGN N AS S A CU UTTIN NG-

  • FIN NIS SH SOL LUTIO ON FOR PO OD L A MINA ATIO ON..

KEY POINTS of EVOLUTION for EASYCUTTER-550

^ Auto-cutting system & Auto-adjustment for cutting length, cutting speed & margin. ^ Touch control panel for easy use ^ Easy & convenient movement by compact body structure with durability ^ Safety shield for user protection purpose while laminating ^ Cost-economic & easy operation cutting system for POD lamination

Page 1 of 2

Easycutter 550 Cutting System Manual, page 2
Text on page 2

EASYCUTT ER-550

Automatic Sheet Cutter

Easy Cutter-550 which is designed as a cost-economic easy & convenient cutting-finish solution for POD lamination features Auto-cutting system with the max. cutting width of 550mm and the user-friendly capabilities of auto-adjustment for cutting length/cutting speed/cutting margin. Also as being with the design concept for moving-freely with ease by compact body structure as well as for stable durability, it offers every customer the opportunity of comfortable experience in operating Easy Cutter-550 in any moment.

FEATURES of EASYCUTTER-550

^ Compact design allows installation in small space ^ Various sorts of Substrates can be cut ^ Easy use for non-professionals by user-interface control panel ^ Various thickness to be cut from thin type to thick one. ^ Scrap basket included ^ Stacker included

APPLICATION of EASYCUTTER-550CUTTER

^ Poster ^ Place mats ^ Advertising Poster ^ Gift & Greetings Cards

SPECIFICATION

Models Dimensions Power Requirements Power Consumption Substrate Thickness Max. Cutting Width Min. Cutting Length Cutting Margin Max. Cutting Speed Laminating Films Speed Control Type of Main Motor

EASYCUTTER-550

890 x 510 x 1044 AC 220V~240V, 50/60Hz 460W, 2A 120 ~350 g/㎡ 550mm 100mm

  • 25~25mm 10m/min 32~250mic Jog Dial Step Motor

#139, Saneopdanji-gil, Paju-si, Gyeonggi-do, Korea | Tel. +82-31-940-3600 | Fax. +82-31-943-4433

Page 2 of 2 · End of manual

Frequently asked questions

What size sheets can the Easycutter-550 cut?

Maximum cutting width is 550mm and minimum cutting length is 100mm, with a cutting margin of -25 to 25mm. See page 2.

How fast does the Easycutter-550 cut?

Maximum cutting speed is 10m/min. Speed is controlled with a jog dial. See page 2.

What substrates and films does it handle?

Substrate thickness is 120 to 350 g/m², and laminating films from 32 to 250 mic. Typical applications are posters, place mats, advertising posters, and gift and greeting cards. See page 2.

What power does the Easycutter-550 need?

It runs on AC 220V to 240V, 50/60Hz, with 460W, 2A power consumption. Dimensions are 890 x 510 x 1044. See page 2.

Does it come with a stacker?

Yes. A scrap basket and a stacker are included. See page 2.