Falcon 36 SAE Illustrated Parts Booklet

( 000 - 002 )

Available Options ; 001 - 067 ( Vacuum Table ) 001 - 321 ( Paper Unwind ) 001 - 177 ( Product Rewind ) 001 - 044 ( Outfeed Slitters ) 001 - 174 ( Outfeed Table ) 001 - 526 ( 39” Nip Height Castors )

690 - 001 Main rolls

690 - 002 Pull roll, Upper

690 - 003 Pull roll, Lower

001 - 034 Assembly, lift, main

001 - 033 Assembly, Pull Rolls

001 - 042 Assembly, Cabinet, Control

520 - 002 Cover, Cabinet, Drive

001 - 035 Assembly, Cabinet, Drive

520 - 002 Cover, Cabinet, Control

001 - 040 Assembly, bridge

440 - 110 Decals, E-Stop

214 - 313 Push button, E-Stop

001 - 036 Assembly, idler

001 - 412 Assembly, rewind drive

465 - 005 Hand wheel

520 - 000 Cabinet, Drive side

760 - 001 Table, Infeed

672 - 012 Pressure Plate

240 - 120 Thermo couples

001 - 032 Assembly, Main Rolls

520 - 001 Cabinet, Control side

F 36 : Top View

Page 1 - 2

F 36 : Front / Rear views

Front View

530 - 007 Core stopper

860 - 005 Rewind tube

001 - 045 Assembly, rewind

001 - 237 Assembly, brake, rewind

001 - 335 Assembly, upper unwind

710 - 009 Shaft, rewind

001 - 037 Assembly, front control

425 - 000 Motor

001 - 336 Assembly, lower unwind

001 - 043 Assembly, stand

470 - 002 Castor wheel

690 - 001 Main rolls

182 - 101 Fan, muffin, 4"

Rear View

690 - 002 Pull roll, upper

620 - 000 Idlers, webbing

001 - 131 Assembly, knob, brake

214 - 313 Push button, E-Stop

001 - 332 Assembly, knob, unwind

214 - 313 Push button, E-Stop

520 - 001 Cabinet, control Side

214 - 400 Knob, switch, on/off

520 - 000 Cabinet, drive side

214 - 420 Switch, power, on/off

175 - 180 Strain relief, 1/2"

425 - 000 Motor

175 - 190 Strain relief, 3/4"

214 - 263 Foot switch

001 - 173 Assembly, power cord

690 - 003 Pull roll, lower

470 - 002 Castor, wheel

001 - 260 Safety label kit

001 - 137 Assembly, Accessory pack

Page 1 - 3

F 36 : Control Side

001 - 411 Assembly, lift, control

001 - 039 Assembly, electrical panel

672 - 000 Plate, bearing, main roll

001 - 112 Assembly, pull roll arm

510 - 002 Bracket, heater, upper

214 - 420 Switch, power, on/off

510 - 029 Bracket, photo-eye

214 - 400 Knob, switch, on/off

250 - 100 Photo-eye

001 - 172 Assembly, plug, vacuum table

175 - 190 Strain relief, 3/4"

189 - 000 Heaters

001 - 232 Panduit set

510 - 009 Bracket, heater, lower

Page 1 - 4

F 36 : 001 - 037 Front & Rear Panels ( CNO )

Front Control Panel

220 - 161 Rotary potentiometer

465 - 150 Knob, speed

MOTOR

FWD

AUTO

214 - 370 Switch, auto/stop

214 - 350 Switch, fwd/rev

REV

STOP

SPEED

450 - 001 Overlay, front panel

FANS

POWER

214 - 380 Switch, 2 pole, on/off

194 - 000 Indicator, green, 220vac

HEATERS

OUT

214 - 360 Switch, 2 pos, on/off

214 - 360 Switch, 2 pos, on/off

PROTECH

OUT

001 - 133 Assembly, temp control o F

PROTECH

001 - 133 Assembly, temp control o F

PRO-TECH Engineering Madison,WI 608-246-8844

Rear Control Panel

MOTOR

AUTO

450 - 061 Overlay, rear panel

214 - 370 Switch, fwd/rev

STOP

Page 1 - 5

MATERIAL DISCLOSED ON THIS

THE DRAWING. IT IS ISSUED IN FOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE CONFIDENCE REPRODUCED, COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FOR MANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTEN PERMISSION FROM GBC PRO- TECH

PNL,ELEC

CNTRL,MTR /KBLC-240DS

BRD,BARR /KBIC-9884

REST,1/8 /KBIC-9890

TB,END /SS-221-01

TB,40A,GRAY /VU4-4

TB,40A,BLUE /VU4-4

BASE,RLY,14PIN /PY14A-E

RLY,14 PIN /MY4N/240

DIN RAIL, 14"

RLY,SST,40A,240V /A2440

BHCS,10-32 X .38

SHCS,8-32 X .38

SHCS,10-32 X .5

WASH,LOCK,10

BAR,JMP /SS-205-01

NUMBERS

CVR,BAR,JMP,V4/V5

FUSE,2.5 /

FUSE

CB,PWR /S272K32

DUCT WITH COVER, 18"

TB,40A,GRN /VUPE 4-4

GROMMET,RUBBER,.31

PROPRIETAR

Y GBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO

L L GR D

Page 1 - 6

M S 10-5- RA S 10-14- RA S 5-31-

REVISIO

N

SHEET 1

OF UNLESS OTHERWISE TOLERANC SPECIFIED E TOL FINIS . H TO P 1/ BE

P .050 P .020 P ANGLE .010 S P P 1D .005

DIM. SHOW AS N X/

. X.

X.X

PRO-TECH

4151 Anderson Road, DeForest, Wisconsin Phone (608) 246-8844 53532 Fax (608) 246- 8645

TITLE

:

DATE : RELEAS NO E .

ASSY, PANEL, ELEC

DRAWN

BY:

RAS

SCALE

:

SIZE :

Dwg :

F 36 : 001 - 039 Electrical Panel

F 36 : Drive side

001 - 417 Assembly, lift, drive

440 - 125 Sprocket, idler

435 - 260 Sprocket, rewind

435 - 260 Sprocket, rewind drive

001 - 027 Assembly, idlers

400 - 120 Chain

510 - 003 Bracket, heater, upper

510 - 057 Bracket, reflector

001 - 180 Assembly,torque limiter

435 - 002 Sprocket, main roll drive

217 - 043 Phoenix contact

510 - 004 Bracket, heater, lower

435 - 175 Sprocket, motor

189 - 000 Heaters

040 - 007 Tapered bushing

Page 1 - 7

SHFT,IDL,.5 /S01

WASH,THRST,.5,.06 /TRB-815

SPRKT,35,13T,.5 /35BS13F

BASE,IDL,3/8-16 /GS

SHCS,1/4-20 X .875

WASH,FLAT,1/4

WASH,LOCK,1/4

NUT,HEX,1/4-20

Page 1 - 8

RA S 10-10-

This print is the property of PRO-TECH ENGR. The information thereon is remitted in confidence.

Pro-Tech Engineering

UNLESS OTHERWISE SPECIFED

TOL .

2117 N. Stoughton Rd. Madison, Wisconsin 53704 Phone (608) 246-8844 Fax (608) 246-8645

TITLE

:

ASSY, SPRKT, IDL, 13T, BASE

PTN-36

ANGLES

DATE:

RAS

DWG SCALE:

Dwg:

F 36 : 001 - 027 Idler Sprocket

PROPRIETARY

GBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THE

MATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCE FOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED, COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FOR MANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTEN PERMISSION FROM GBC PRO-TECH

ROLL,PULL,LWR,2.5X42

SHFT,ROLL,PULL,LWR,.75,47.38

BUSH,BRNZ,FLNG,.75,1,.62 /FB1216-5

BUSH,KYLS

SCRW,SHDR,.5,.75,3/8-16

NUT,NYLOC,3/8-16

SCREW, SHLDR 1/2 X 1/2

RING,SNAP,.75 /5100-75

LMTR,TORQ,/TL250-2

KEY,3/16 X 1

ASSY,ROLL,PULL

REVISIO

N

BJ T 6-8- AJ

Page 1 - 10

SHEET 1

OF UNLESS OTHERWISE TOLERANC SPECIFIED E TOL FINIS . H TO P 1/ BE

P .050 P .020 P ANGLE .010 S P P 1D .005

DIM. SHOW AS N X/

. X.

X.X

PRO-TECH

TITLE

:

4151 Anderson Road, DeForest, Wisconsin Phone (608) 246-8844 53532 Fax (608) 246- 8645

ASSY,ROLL,PUL

L

DATE : RELEAS NO E .

DRAWN

BY:

RAS

SCALE

:

SIZE :

Dwg :

F 36 : 001 - 033 Assembly, Pull Roll ( CNO )

GEAR,HELI,RH,16DP,24T,1.50,.75 /16HS24R

KEY, 3/16 X 1

WASH,THRT,.75,1,.12 /TB1220

SHSC 1/4-20 X .75

SHCS,1/4-20 X .625

WASH,LOCK,1/4

SHFT,CRNK,LIFT,ROLL,MAIN

HNDWHL,6 /82402066

WASHER, FLAT #10

SHCS,10-32 X .38

WASH,LOCK,10

BRKT,MTG,HTR

BRKT,MTG,HTR, W/ CLAMP

SW,PHEYE /E3F-R2Z1

BRKT,PHEYE,FALCON

SCRW,SHLD,.375,1.25,5/16-18

BRACKET,REFLECTOR,PHEYE

SHCS,5/16 X .5

WASHER,FLAT,5/16

USECTION A-

A

ASSY,LIFTER,ROLL,MAIN

ASSY,LIFTER,ROLL,MAIN

REVISIO

N

BJ T 6-8-97 GT S 3-3-97 M S 10-29-96

Page 1 - 11

SHEET 1

OF UNLESS OTHERWISE TOLERANC SPECIFIED E

DIM. SHOW AS N X/

. X.

X.X

FINIS

H TO BE

ANGLE

S P 1D

PRO-TECH

4151 Anderson Road, DeForest, Wisconsin Phone (608) 246-8844 53532 Fax (608) 246- 8645

ASSY,LFTR,ROLL,MAI

N

DATE : RELEAS NO E .

DRAWN

BY:

RAS

SCALE

:

SIZE :

Dwg :

F 36 : 001 - 034 Assembly, Lift Mechanism ( CNO )

PROPRIETAR

Y

GBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO

MATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN THE FOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE CONFIDENCE COPIED OR DISCLOSED REPRODUCED, IN WHOLE OR IN PART, OR USED MANUFACTURE OR FOR ANY FOR OTHER PURPOSE WITHOUT PERMISSION FROM GBC PRO- WRITTEN TECH

MOTOR, 1/8 HP

CHAIN, 35

SPROCKET, 35, 20T, 5/8 BORE

CHAIN, LINK, MASTER

SCREW, SET, 1/4-20 X .375

WASHER, LOCK, STAR, 1/4

WASHER, BAR, 1/4

TERMINAL, BLOCK

NUT, NYLOCK, 10-32

ASSY, SPROCKET, IDLER

RELIEF, STRAIN, SMALL

SHCS, 1/4-20 X 1

NUT, HEX, 1/4-20

SHCS #4-40 X 3/4

T 6-8- BJT 5-13-98 RLM 3-25-96 RAS 2-23-94

REVISIO

N

AJ H 2/18/ BJ

Page 1 - 12

This print is the property of PRO-TECH ENGR. The information thereon is remitted in confidence. UNLESS OTHERWISE SPECIFED TOLERANC E 2117 N. Stoughton Rd. Madison, Wisconsin TOL 53704 Fax (608) 246- Phone (608) 246-8844 FINIS SHOW . 4685 H N TO TITLE P 1/ BE X/X :

P X. .050 P X.X .020 DATE DRAWN DWG Dwg P ANGLE X.X : BY: SCALE: : .010 S P 2-16-94 RAS C4 P 1D .005

ASSY,DRIVE,STANDAR

FALCON- D

F 36 : 001 - 035 Assembly, Drive ( CNO )

IDL,TEN

BUSH,BRNZ,FLNG,1,1.25,.75 /FB1620-6

RING,SNAP,1 /5100-100

UNLESS OTHERWISE SPECIFED

2117 N. Stoughton Rd. Madison, Wisconsin 53704

ANGLE

S P

Phone (608) 246-8844 Fax (608) 246-4685

TITLE

:

ASSY,IDL,TEN,BRK

F-36

DATE:

RAS

DWG SCALE:

Dwg :

F 36 : 001 - 036 Idler, Webbing

Page 1 - 13

This print is the property of PRO-TECH ENGR. The information thereon is remitted in confidence.

PROPRIETARY

GBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THE

MATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCE FOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED, COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FOR MANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTEN PERMISSION FROM GBC PRO-TECH

CAB,BRDG,FALCON

BRKT,MTG,TC

FAN,MUFFIN

GUARD,FAN

SCRW,PAN,6-32 X 2

SHCS,10-32 X .5

WASH,LOCK,10

GROMMET

TUBING,PNEUMATIC,1/4

WIRE HARNESS,DAISY CHAIN

5 FT

INSERT END OF PNEUMATIC TUBING INTO THIS HOLE 11

FROM INSIDE BRIDGE CABINET. TO BE USED AS CONDUIT FOR THE THERMOCOUPLE LEAD

SHEET 1 OF

#REF!

UNLESS OTHERWISE SPECIFIED

S 4-22- RA

Page 1 - 14

D.G . 2-24- J.S. 6-14- RA

S 9-27- RA

X.XXX

#REF! #REF!

ANGLES

P 1D

PRO-TECH

4151 Anderson Road, DeForest, Wisconsin 53532 Phone (608) 246-8844 Fax (608) 246-8645

DATE:

RELEASE

NO.

#REF!

#REF!

SCALE:

SIZE:

Dwg:

#REF! #REF!

#REF!

F 36 : 001 - 040 Bridge

MATERIAL DISCLOSED ON THIS

THE DRAWING. IT IS ISSUED IN FOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE CONFIDENCE REPRODUCED, COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FOR MANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTEN PERMISSION FROM GBC PRO- TECH

POSITON AND/OR BEND TO ACHIEVE FLAT CONTACT WITH ROLL AT THERMOCOUPLE JUNCTION

CENTER SPRING OVER THERMOCOUPLE JUNCTION

WIRE INSIDE BRIDGE ASSEMBLY

POSITON FOR BEST SPRING LOCATION DETAIL 1: THERMOCOUPLE MOUNTING SCALE X8

CABINET,LEFT

CABINET,COVER,RIGHT

CABINET,COVER,LEFT

BHCS,#10-32 X .5

TABLE,INFEED

ASSEMBLY,BRIDGE

ASSEMBLY, SAFETY LABEL

BRACKET,MOUNTING,TIEBAR

SHCS,3/8-16 X .75

WASHER,LOCK,3/8

SHAFT,IDLER,ENVELOPE

SHCS, 3/8-16 X 1.0

CONNECTOR,COMPRESSION,1/2

CONDUIT,1/2

SWITCH,POWER,ON/OFF

KNOB,SWITCH,POWER,ON/OFF

CONTACT BLOCK, E-STOP

SWITCH,PALM,EMERGENCY STOP

DECAL,SWITCH,EMERGENCY STOP

SWITCH,FOOT

THERMOCOUPLE, OKJ30B13A

STRAIN RELIEF,1/2

TIE BAR, UNWIND

PLUG,HOLE,DOME,BLACK,3/8

PLUG,HOLE,DOME,1

LIGHT,INDICATOR,RED

GROMMET,RUBBER STRIP

SERIAL PLATE,GENERIC

SHSC,1/4-20 X .75

BUMPER,RUBBER,RECESSED

ASSEMBLY,PLUG,POWER,VAC TABLE

RIVET,1/8

SUPPORT,TABLE,INFEED,FALCON-36

WASHER,LOCK,3/8

PLUG,HOLE,DOME,BLACK,5/8

PLATE,PRESSURE,INFEED

STRIP %%C.25 X 1/4 (26300)

SUPPORT,THERMOCOUPLE

SPRING

BHCS #6-32 x 1/4

FLAT WASHER, #6

EXT LOCK WASHER, #10

BHCS 10-32 x 3/8

SEE DETAIL

Page 1 - 15

BJ T 6-9- D.G . 2-23- D.G . 2-3- AJ H 11/12/ AJ H 9/26/ GT S 3-3- M S 11-22-

REVISIO

N

SHEET 1

OF UNLESS OTHERWISE TOLERANC SPECIFIED E DIM. TOL FINIS SHOW AS . H TO N X/ P 1/ BE

P . .050 X. P .020 X.X P ANGLE .010 S P P 1D .005

TITLE

:

PRO-TECH

4151 Anderson Road, DeForest, Wisconsin Phone (608) 246-8844 53532 Fax (608) 246- 8645

ASSEMBLY,CABINE

T

DATE : RELEAS NO E .

DRAWN

BY:

RAS

SCALE

:

SIZE :

Dwg :

F 36 : 001 - 042 Assembly, Cabinet ( CNO )

ASSEMBLY, CHASSIS WIRE DUCT SET

CABINET,RIGHT

PROPRIETAR

Y GBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO

PROPRIETARY

GBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THE

MATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCE FOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED, COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FOR MANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTEN PERMISSION FROM GBC PRO-TECH

STAND,LEG

SUPPORT,STAND

CASTOR, SWIVEL, 20-30S-B2-HR-TB

BHCS,1/4-20 X .5

SHCS,1/2-13 X 1

WASHER,LOCK,1/2

WASHER, 1/2 EXTERNAL STAR

NUT, HEX HEAVY, 1/2-13

TOL . P 1/

P .050 P .020 P .010 P .005

PRO-TECH

UNLESS OTHERWISE SPECIFIED

T 6-9- M S 10-7- RA

Page 1 - 16

SHEET 1 OF

4151 Anderson Road, DeForest, Wisconsin 53532

ANGLE

S P 1D

Phone (608) 246-8844 Fax (608) 246-8645

TITLE

:

ASSY,STAND

F-36

DATE :

RELEASE

NO

DRAWN

BY:

RAS

SCALE

:

SIZE :

Dwg :

F 36 : 001 - 043 Stand

BAR,SLITTER

PLUNGER,SPRING,STUBBY /LNK-3

BRACKET,MOUNTING,BAR,SLITTER

SHCS,10-32 X .5

WASHER,LOCK,#10

HOLDER,BLADE

ADJUST AS NECESSARY FOR TIGHT FIT WITH SIDE FRAME

This print is the property of PRO-TECH ENGR. The information thereon is remitted in confidence.

Pro-Tech Engineering

UNLESS OTHERWISE SPECIFED

2117 N. Stoughton Rd. Madison, Wisconsin 53704

Page 1 - 17

PLUNGER DETAIL 2X SCALE

X.XXX

Phone (608) 246-8844 Fax (608) 246-4685

ASSY,SLITTER,FALCON

F-36

ANGLES

P 1D

DATE:

DWG SCALE:

RAS

Dwg:

F 36 : 001 - 044 Output Slitters

PROPRIETARY

GBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THE

MATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCE FOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED, COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FOR MANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTEN PERMISSION FROM GBC PRO-TECH

SHAFT,DRIVE,REWIND,FALCON

JOURNAL,SHAFT,DRIVE,REWIND,FALCON

SPRING,WAVE,COMPRESSION

BUSH,BRONZE,.75 X 1 X 1 /FB1216-8

CHUCK,CORE,REWIND

SCREW,SET,3/8-16 X .5

ASS'Y,BRAKE,REWIND

(REF 001-412)

(REF 040-003)

AJ H 3/2/ AJ H 1/23/ M S 10-17-

Page 1 - 18

SHEET 1 OF

PRO-TECH

UNLESS OTHERWISE SPECIFIED

X.XXX

4151 Anderson Road, DeForest, Wisconsin 53532 Phone (608) 246-8844 Fax (608) 246-8645

ANGLES

P 1D

ASSY,REWIND,FALCON

F-36

DATE:

RELEASE

RAS

SCALE:

SIZE:

Dwg:

F 36 : 001 - 045 Rewind

TABLE,INFEED,VAC

FAN,MUFFIN,230 /3-15-3451

GUARD,FAN

SCREW,PAN,6-32 X 2

RELIEF,STRAIN,CABLE /1214

ASSEMBLY,CABLE,POWER,VAC TABLE

RELIEF,STRAIN,CABLE /1077

CABLE,18/2

SHIELD,DEFLECTOR,FAN

This print is the property of PRO-TECH ENGR. The information thereon is remitted in confidence.

Page 1 - 19

UNLESS OTHERWISE SPECIFED

X.XXX

ANGLES

P 1D

2117 N. Stoughton Rd. Madison, Wisconsin 53704 Phone (608) 246-8844 Fax (608) 246-4685

ASSY,TBL,INFD,VAC,FALCON-36

F-36

DATE:

RAS

DWG SCALE:

Dwg:

F 36 : 001 - 067 Vacuum Table

BRACKET,MOUNTING,PULL ROLL,UPPER

BUSHING,BRONZ,FLANGE,.75,1,.625

BUSHING,BRONZ,FLANGE,.5,.75,.625

Pro-Tech Engineering

UNLESS OTHERWISE SPECIFED

Page 1 - 20

2117 N. Stoughton Rd. Madison, Wisconsin 53704

ANGLE

S P 1D

Phone (608) 246-8844 Fax (608) 246-4685

ASS'Y,ARM,PULL ROLL FALCON-36

DATE:

RAS

DWG SCALE:

Dwg:

F 36 : 001 - 112 Arm, Pull Roll

This print is the property of PRO-TECH ENGR. The information thereon is remitted in confidence.

CABLE,POWER,18/3

PLUG,MALE

RAS

Page 1 - 21

This print is the property of PRO-TECH ENGR. The information thereon is remitted in confidence.

UNLESS OTHERWISE SPECIFED

2117 N. Stoughton Rd. Madison, Wisconsin 53704

Phone (608) 246-8844 Fax (608) 246-8645

ANGLES

X.XXX

ASSEMBLY,CABLE,POWER,VAC TABLE

FALCON 36

DATE:

RAS

DWG SCALE:

Dwg:

F 36 : 001 - 127 Power Cable, Vacuum Table

KNOB,CLAMP,FEMALE,1/4-20

SET SCREW 1/4-20 X 2.5 CUP POINT

SPACER

PROPRIETARY

GBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THE

MATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCE FOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED, COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FOR MANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTEN PERMISSION FROM GBC PRO-TECH

USE GREEN LOCKTITE TO LOCK SCREW IN PLACE

6-14-95 RAS

MS

Page 1 - 22

SHEET 1 OF

PRO-TECH

UNLESS OTHERWISE SPECIFIED

X.XXX

ANGLES

P 1D

4151 Anderson Road, DeForest, Wisconsin 53532 Phone (608) 246-8844 Fax (608) 246-8645

ASSEMBLY,KNOB,CLAMP,BRAKE FALCON 36

DATE: 6-23-94

RELEASE

NO.

RAS

SCALE:

SIZE:

Dwg:

F 36 : 001 - 131 Assembly, Knob, Brake

CONTROLLER,TEMPERATURE

OVERLAY,50-300,%%DF

OUT 150

This print is the property of PRO-TECH ENGR. The information thereon is remitted in confidence.

Pro-Tech Engineering

UNLESS OTHERWISE SPECIFED

Page 1 - 23

TOL .

2117 N. Stoughton Rd. Madison, Wisconsin 53704 Phone (608) 246-8844 Fax (608) 246-8645

ANGLES

ASSEM,CONTROLLER,TEMP,%%DF

DATE:

RAS

DWG SCALE:

Dwg:

F 36 : 001 - 133 Temperature Controller, o F

PROTEC

H

HOLDER,BLADE

NUT,T-SLOT,1/4-20 /3382

KNOB,KNURLED /DK-510

PIN,DOWEL,1/4 X .5

SCREW,THUMB,1/4-20 X .5

BLADE,RAZOR

SCREW,SET,1/4-20 X 1.75 /25337

NOTE: SEE 001-044 FOR REST OF SLITTER ASSEMBLY.

PRESS INTO PLACE AND GLUE WITH BLACK MAX

GREEN LOCTITE TO ITEM 3

AJH 3/5/99

REV

ECN

• ADD NOTES & DIMENSION LOCATING PINS

Page 1 - 24

UNLESS OTHERWISE SPECIFIED

X.XXX

4151 Anderson Road, DeForest, Wisconsin 53532 Phone (608) 246-8844 Fax (608) 246-8645

SLITTER ASSEMBLY

FALCON 36

ANGLES

P 1D

DATE:

RELEASE

NO.

SCALE:

SIZE:

Dwg:

F 36 : 001 - 135 Slitter Assembly

TOWEL,WHITE

VIDEO

ZIPPY KNIFE

ALLEN WRENCH SET

1/4-20 x 2 SHCS

FLR STK ITEM

FUSE, SB, 3AG, 3A

TAPE MEASURE

RUBBER CEMENT PICK-UP

FUSE, SB, 3AG, 2.5A

BOX ACCESSORY

FALCON OPERATION MANUAL

Pro-Tech Engineering

AJ H 11/12/97 AJ H 11-5-97

Page 1 - 25

UNLESS OTHERWISE SPECIFED

2117 N. Stoughton Rd. Madison, Wisconsin 53704

Phone (608) 246-8844 Fax (608) 246-8645

ANGLES

ACCESSORY KIT, FALCON

DATE:

RLM

DWG SCALE:

Dwg :

F 36 : 001 - 137 Accessory Pack

This print is the property of PRO-TECH ENGR. The information thereon is remitted in confidence.

WIRE,RED,22AWG,#F085

WIRE,GREEN/YELLOW,GROUND,#F082

WIRE,LT BLUE,22AWG,#F083

CONNECTOR,PUSH ON

CONNECTOR,RECEPTACLE,FEMALE

SOLDER GROUND WIRE HERE COVER WITH 1/4OD X 3/4 LG SHRINK TUBING

TAG 25

This print is the property of PRO-TECH ENGR. The information thereon is remitted in confidence.

UNLESS OTHERWISE SPECIFED

Page 1 - 26

Pro-Tech Engineering

2117 N. Stoughton Rd. Madison, Wisconsin 53704 Phone (608) 246-8844 Fax (608) 246-8645

ASSEMBLY,PLUG,POWER,VAC TBL

ANGLE

S

DATE:

RAS

DWG SCALE:

Dwg:

F 36 : 001 - 172 Plug, Power, Vacuum Table

TABLE,INFEED

BRACKET,TABLE,REAR,LEFT

BRACKET,TABLE,REAR,RIGHT

SHCS,1/4-20 X .5

WASHER,LOCK,1/4

BHCS,1/4-20 X .5

AJ H 8/13/

2117 N. Stoughton Rd. Madison, Wisconsin 53704

Page 1 - 27

UNLESS OTHERWISE SPECIFED

Phone (608) 246-8844 Fax (608) 246-4685

ASSEMBLY,TABLE,OUTFEED,OPTION

ANGLES

DATE:

RAS

DWG SCALE:

Dwg:

F 36 : 001 - 174 Infeed Table

This print is the property of PRO-TECH ENGR. The information thereon is remitted in confidence.

PROPRIETARY

GBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THE

MATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCE FOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED, COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FOR MANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTEN PERMISSION FROM GBC PRO-TECH

ASSEMBLY,REWIND,FALCON

ASSY,SPROCKET,IDLER

CHAIN,35

CHAIN,LINK,MASTER

ASSY,SPROCKET,FALCON

LINK,CHAIN,1/2

BUSH.,BRONZE, FB1016-6

PRO-TECH

AJH

SHEET 1 OF 1

UNLESS OTHERWISE SPECIFIED

Page 1 - 28

MS 1-13-97

4151 Anderson Road, DeForest, Wisconsin 53532 Phone (608) 246-8844 Fax (608) 246-8645

ASSY,REWIND,OPTIONAL

FALCON-36

X.XXX

10-10-94 ANGLES DATE: P 1D RELEASE

SCALE:

SIZE:

RAS

Dwg:

F 36 : 001 - 177 Finished Product Rewind

TORQUE LIMITER

BUSHING,TORQUE LIMITER

SPROCKET,35,25T

BRASS TIP SET SCREW 10-24 X 1/4

PROPRIETARY

GBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THE

MATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCE FOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED, COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FOR MANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTEN PERMISSION FROM GBC PRO-TECH

Page 1 - 29

SHEET 1 OF 1

UNLESS OTHERWISE SPECIFIED

4151 Anderson Road, DeForest, Wisconsin 53532

PRO-TECH

Phone (608) 246-8844 Fax (608) 246-8645

ASSEMBLY,TORQUE,LIMITER

F - 36

ANGLES

DATE:

RELEASE

SCALE:

SIZE:

RAS

Dwg:

F 36 : 001 - 180 Torque Limiter

APPLY LUBRIPLATE DOW #44

GREASE TO EACH SURFACE OF BRAKE PADS.

DUCT BASE, 1 X 9 " LG ( WITH ADHESIVE )

DUCT COVER, 1 X 6.5" LG

DUCT BASE, 1 X 6.5" LG ( WITH ADHESIVE )

DUCT COVER, 1 X 5" LG

DUCT BASE, 1 X 5" LG ( WITH ADHESIVE )

DUCT COVER, 1 X 3" LG

DUCT BASE, 1 X 3" LG ( WITH ADHESIVE )

DUCT COVER, 1 X 2" LG

DUCT BASE, 1 X 2" LG ( WITH ADHESIVE )

DUCT COVER, 1 X 9 " LG

REV

ECN

Page 1 - 30

UNLESS OTHERWISE SPECIFIED

X.XXX

4151 Anderson Road, DeForest, Wisconsin 53532 Phone (608) 246-8844 Fax (608) 246-8645

ANGLES

P 1D

DATE:

RELEASE

NO.

PANDUIT ASSEMBLY FALCON 36

SCALE:

SIZE:

Dwg:

F 36 : 001 - 232 Panduit Set

HUB,BRAKE,REWIND

SCREW,SET,3/8-16 X .250

CHUCK,CORE,QUICK RELEASE,REWIND

GRIPPER,CORE

SCREW,SELF-TAPING,#6-32 X .375

WASHER,NYLON

SPRING,WAVE

BRAKE,ADJUST NUT,REWIND

2117 N. Stoughton Rd. Madison, Wisconsin 53704

Phone (608) 246-8844 Fax (608) 246-8645

ANGLES

X.XXX

ASS'Y,BRAKE,REWIND

DATE:

DWG SCALE:

Dwg:

F 36 : 001 - 237 Brake, Rewind

Page 1 - 31

This print is the property of PRO-TECH ENGR. The information thereon is remitted in confidence.

UNLESS OTHERWISE SPECIFED

PLACE INSIDE CABINET IN VISIBLE LOCATION

DECAL,DANGER HAZARDOUS VOLTAGE

DECAL,WARNING MOVING PARTS

DECAL,WARNING CRUSH AND BURN,RIGHT

DECAL,WARNING READ MANUAL

DECAL,READ SAFETY INSTRUCTIONS

DECAL, HIGH VOLTAGE

ON OUTSIDE

BJT

Page 1 - 32

This print is the property of PRO-TECH ENGR. The information thereon is remitted in confidence.

UNLESS OTHERWISE SPECIFED

2117 N. Stoughton Rd. Madison, Wisconsin 53704 Phone (608) 246-8844 Fax (608) 246-8645

X.XXX

KIT, SAFETY LABEL

FALCON 36

ANGLES

DATE:

DWG SCALE:

Dwg:

F 36 : 001 - 260 Safety Label Kit

IDLER,INFEED,PAPER

SHAFT,IDLER,INFEED,PAPER

BEARING,FLANGE

UNLESS OTHERWISE SPECIFED

Pro-Tech Engineering

Page 1 - 33

2117 N. Stoughton Rd. Madison, Wisconsin 53704

ANGLES

X.XXX

Phone (608) 246-8844 Fax (608) 246-8645

ASSEMBLY,IDLER,PAPER

FALCON 36

DATE:

RAS

DWG SCALE:

Dwg:

F 36 : 001 - 310 Assembly, Idler, Paper

This print is the property of PRO-TECH ENGR. The information thereon is remitted in confidence.

ASSEMBLY,IDLER,PAPER

BRACKET,MOUNTING,IDLER

SHCS,3/8-16 X 1

WASHER,LOCK,3/8

This print is the property of PRO-TECH ENGR. The information thereon is remitted in confidence.

Page 1 - 34

UNLESS OTHERWISE SPECIFED

X.XXX

2117 N. Stoughton Rd. Madison, Wisconsin 53704 Phone (608) 246-8844 Fax (608) 246-8645

ASSEMBLY,IDLER,INFEED,PAPER

FALCON 36

ANGLES

DATE:

DWG SCALE:

Dwg:

F 36 : 001 - 311 Assembly, Table Idler

GBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THE

MATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCE FOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED, COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FOR MANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTEN PERMISSION FROM GBC PRO-TECH

ASSEMBLY,IDLER,INFEED,PAPER

ASSEMBLY,REWIND

SHAFT,DUMMY

NUT,HEX,1/2-13

SHCS 3/8-16 X 1.25

PROPRIETARY

MOVE TIEBAR SHAFT TO THIS LOCATION

REPLACE SHOULDER BOLTS HERE WITH

ITEM-6

USE EXISTING SHOULDER BOLTS

HERE

SHEET 1 OF

X.XXX

4151 Anderson Road, DeForest, Wisconsin 53532 Phone (608) 246-8844 Fax (608) 246-8645

ANGLES

PRO-TECH

UNLESS OTHERWISE SPECIFIED

Page 1 - 35

ASSEMBLY,UNWIND,PAPER FALCON 36

DATE:

RELEASE

NO.

SCALE:

SIZE:

RAS

Dwg:

F 36 : 001 - 321 Paper Unwind

KNOB,CLAMP,FEMALE,1/4-20

SET SCREW 1/4-20 X 2 1/2 CUP POINT

PROPRIETARY

GBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THE

MATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCE FOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED, COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FOR MANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTEN PERMISSION FROM GBC PRO-TECH

MS

Page 1 - 36

SHEET 1 OF

UNLESS OTHERWISE SPECIFIED

X.XXX

ANGLES

P 1D

PRO-TECH

4151 Anderson Road, DeForest, Wisconsin 53532 Phone (608) 246-8844 Fax (608) 246-8645

ASSEMBLY,KNOB,CLAMP FALCON 36

DATE: 10-30-95

RELEASE

NO.

SCALE:

RAS

SIZE:

Dwg:

F 36 : 001 - 332 Assembly, Clamp Knob, Unwind

PROPRIETARY

GBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THE

MATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCE FOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED, COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FOR MANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTEN PERMISSION FROM GBC PRO-TECH

BRACKET,MOUNTING,UNWIND,RIGHT

BRACKET,MOUNTING,UNWIND,LEFT

FHSCH, 1/2-13 X 1 1/4

CHUCK,CORE,QUICK RELEASE

SCREW,SELF-TAP,6-32 X .38

GRIPPER,CORE

CHUCK,CORE

BUSH,BRNZ,.75,1,1.25 /FB1216-10

BOLT,SHLDR,.75,3.5,5/8-11

BRAKE,UNWIND

SPRING,WAVE,.75 /SSR-0100

SETSCREW, 3/8 - 16 X 3/8, BRASS TIP

ASSEMBLY,KNOB,CLAMP

ASSEMBLY,KNOB,CLAMP,BRAKE

PIN,DOWEL,3/16 X .75

CHUCK,CORE

WASHER, FEND, 1/4 X 1/2

WASHER, THRUST/TRA-1220

AJ H 6/17/ M S 10-5- RL M 2-21- RA S 12-20-

REVISIO

N

Page 1 - 37

SHEET 1

OF UNLESS OTHERWISE TOLERANC SPECIFIED E TOL FINIS . H TO P 1/ BE

P .050 P .020 P ANGLE .010 S P P 1D .005

DIM. SHOW AS N X/

. X.

X.X

TITLE

:

PRO-TECH

4151 Anderson Road, DeForest, Wisconsin Phone (608) 246-8844 53532 Fax (608) 246- 8645

ASSEMBLY,UNWIND,UPPE

R

DATE : RELEAS 10-31-95 NO E .

DRAWN

BY:

RAS

SCALE

:

SIZE :

Dwg :

F 36 : 001 - 335 Assembly, Unwind, Upper ( CNO )

PROPRIETARY

GBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THE

MATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCE FOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED, COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FOR MANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTEN PERMISSION FROM GBC PRO-TECH

BRACKET,MOUNTING,UNWIND,RIGHT

BRACKET,MOUNTING,UNWIND,LEFT

FHSCH, 1/2-13 X 1 1/4

CHUCK,CORE,QUICK RELEASE

SCREW,SELF-TAP,6-32 X .38

GRIPPER,CORE

CHUCK,CORE

BUSH,BRNZ,.75,1,1.25 /FB1216-10

BOLT,SHLDR,.75,3.5,5/8-11

BRAKE,UNWIND

SPRING,WAVE,.75 /SSR-0100

SETSCREW, 3/8 - 16 X 3/8 BRASS TIP

ASSEMBLY,KNOB,CLAMP

ASSEMBLY,KNOB,CLAMP,BRAKE

PIN,DOWEL,3/16 X .75

CHUCK,CORE

WASHER, FENDER, 1/4 X 1/2

WASHER, THRUST/ TRA-1220

REVISIO

N

Page 1 - 38

H 6/17/ M S 10-5- RL M 2-21-

SHEET 1

OF UNLESS OTHERWISE TOLERANC SPECIFIED E DIM. TOL FINIS SHOW AS . H TO N X/ P 1/ BE

P . .050 X. P .020 X.X P ANGLE .010 S P P 1D .005

PRO-TECH

4151 Anderson Road, DeForest, Wisconsin Phone (608) 246-8844 53532 Fax (608) 246- 8645

TITLE

:

ASSEMBLY,MOUNTING,UNWIND

LOWER

DATE 10-31- : RELEAS NO E .

DRAWN

BY:

RAS

SCALE

:

SIZE :

Dwg :

F 36 : 001 - 336 Assembly, Unwind, Lower ( CNO )

GBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THE

MATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCE FOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED, COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FOR MANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTEN PERMISSION FROM GBC PRO-TECH

BLCK,GEAR

GEAR,HELI,RH,MOD

SCRW,ACME,MOD

BUSH,BRNZ,FLG,.75,1,.75 /FB1216-6

BUSH,BRZ,FLG,.62,.75,.50 /FB1012-4

BLK,BRG,ROLL,MAIN,UPR

BUSH,BRNZ,FLNG,1.25,1.5,1 /FB2024-8

BLOCK,SPRING,PLATE,BEARING

STRIP 3/8 x 1 1/4

PROPRIETARY

SHEET 1 OF

X.XXX

4151 Anderson Road, DeForest, Wisconsin 53532 Phone (608) 246-8844 Fax (608) 246-8645

ASSY,LFTR,ROLL,MAIN

FALCON 36

ANGLES

P 1D

PRO-TECH

UNLESS OTHERWISE SPECIFIED

Page 1 - 39

AJH 1/26/98

DATE:

RELEASE

NO.

SCALE:

SIZE:

RAS

Dwg:

F 36 : 001 - 411 Assembly, Lift, Control

SHAFT,DRIVE,REWIND,FALCON

KEY,3/16 X .62

BUSH,BRONZE,.75 X 1 X .75 /FB1216-6

WASHER,THRUST,.75 X .030 /TRA-1220

BEARING,THRUST,.75 /NTA-1220

WASHER,THRUST,1 X .153 /TRE-1625

WASHER,THRUST,1 X .125 /TRD-1625

BEARING,THRUST, 1 /NTA-1625

NUT,JAM,HEX, 3/4-16

SPROCKET,35,25T,.75 /BS35-26 3/4

PROPRIETARY

GBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THE

MATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCE FOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED, COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FOR MANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTEN PERMISSION FROM GBC PRO-TECH

BJT

Page 1 - 40

SHEET 1 OF

PRO-TECH

UNLESS OTHERWISE SPECIFIED

X.XXX

4151 Anderson Road, DeForest, Wisconsin 53532 Phone (608) 246-8844 Fax (608) 246-8645

ASSY,SPROCKET,FALCON

ANGLES

P 1D

DATE:

RELEASE

NO.

SCALE:

SIZE:

Dwg:

F 36 : 001 - 412 Rewind Assembly, Drive

GBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THE

MATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCE FOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED, COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FOR MANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTEN PERMISSION FROM GBC PRO-TECH

BLCK,GEAR

GEAR,HELI,RH,MOD

SCRW,ACME,MOD

BUSH,BRNZ,FLG,.75,1,.75 /FB1216-6

BUSH,BRZ,FLG,.62,.75,.50 /FB1012-4

BLK,BRG,ROLL,MAIN,UPR

BUSH,BRNZ,FLNG,1.25,1.5,1 /FB2024-8

BLOCK,SPRING,PLATE,BEARING

STRIP 3/8 x 1 1/4

PROPRIETARY

SHEET 1 OF

X.XXX

4151 Anderson Road, DeForest, Wisconsin 53532 Phone (608) 246-8844 Fax (608) 246-8645

ASSY,LFTR,ROLL,MAIN

FALCON 36

ANGLES

P 1D

PRO-TECH

UNLESS OTHERWISE SPECIFIED

AJH 1/26/98

Page 1 - 41

(SIM TO 001-411)

DATE:

RELEASE

NO.

SCALE:

SIZE:

MRS

Dwg:

F 36 : 001 - 417 Assembly, Lift, Drive

1/2-13 HEX NUT #36510

REF

CASTER

F36 MACHINE BASE

INSTRUCTION DIAGRAM, CASTER MOUNT, F36

NOTES:

1. ASSEMBLY PARTS LOOSELY SO THAT NUT CAPTURES WASHERS.
2. BAG EACH CASTER ASSEMBLY SEPARATELY.
3. MARK ASSEMBLY NUMBER ON EACH BAGGED CASTER.

SHEET 2101 OF

PRO-TECH

Page 1 - 42

UNLESS OTHERWISE SPECIFIED

X.XXX

4151 Anderson Road, DeForest, Wisconsin 53532 Phone (608) 246-8844 Fax (608) 246-8645

ANGLES

P 1D

ASSY, LARGE CASTERS, F36

BPICS9300079

DATE:

SCALE:

SIZE:

RELEASE

NO.

AJH

Dwg:

F 36 : 001 - 526 Large Castors, 39” Nip Height