Page 1 of 5
Text on page 2
Laminator
EXL 45-3
Please read these instructions before use.
Veuillez lire ces instructions avant utilisation.
Lea estas instrucciones antes del uso.
fellowes.com
Page 2 of 5
Text on page 3
ENGLISH
Pouch Thickness (mil) Selector
CAPABILITIES
- Pouch width: Max. inches
- Pouch thickness: Min.-Max. mils
- Combined thickness: Max. millimeters inches
- Speed in minutes to: Warm-up to low heat Warm-up to high heat
approx. 18”/min (fixed speed)
IMPORTANT SAFETY INSTRUCTIONS — Read Before Using!
- The socket-outlet shall be installed near the equipment and shall be easily accessible.
- To prevent electrical shock, do NOT use laminator close to water and do NOT spill water on laminator, electric cord, or wall socket.
- Do not leave electric cord in contact with a warm surface.
- Do not leave electric cord hanging from a cupboard or shelf.
- Do not use laminator if electric cord is damaged.
- Only use pouches specifically designed for the lamination setting you intend to use.
- Always supervise children during laminator operation.
- Keep pets away from laminator while in use.
- Switch off and unplug laminator when not in use.
- Do not open or attempt to repair the laminator yourself, as this could result in electric shock and will void your warranty. Contact Customer Service if you have questions. Please note the warranty does not apply in cases of abuse, mishandling or unauthorized repair.
- Do not laminate metal objects.
TIPS
IMPORTANT SAFETY INFORMATION
- Always put item in a pouch. Never laminate an empty pouch.
- Trim excess pouch material from around your item after laminating and cooling.
- Before laminating valuable items, do a test run with an item similar in size and thickness.
This laminator is equipped with an Auto shut-off function. It will turn the laminator into stand-by mode, if it has not been used for over 15 minutes. To switch the laminator back on, turn the Power button off and then on.
Page 3 of 5
Text on page 4
BEFORE YOU LAMINATE
Use Fellowes ® brand pouches for best results. Select correct pouch size for laminated item.
- Plug laminator into power outlet.
- Position laminator so you have enough space to allow items to pass freely through the machine.
- Switch the power on. The red power light will turn on.
HOT LAMINATION STEPS
Use the dial to select required temperature (3, 4 or 5 mil)
Place pouch, sealed edge first, into laminator entry. Keep pouch straight and use the edge guide to center it.
As laminator warms up, the LCD Screen will indicate progress. When the selected temperature is reached the green flashing light will turn solid.
To prevent jamming, immediately remove laminated item from back of machine. Let item cool on flat surface for several seconds.
Place item inside pouch against the sealed edge. To prevent jamming, use a Support Sheet when item is smaller than the pouch.
Before switching off laminator, feed a piece of paper through machine to clean unit.
TROUBLESHOOTING
Ready Light does not go on after extended Laminator is in a hot, humid area. time.
Move laminator to a cool dry area.
Need Help?
Pouch did not completely adhere to item.
Laminated item may be too thick.
Pass through laminator a second time.
Customer Service:
Laminated item was not immediately removed from machine.
Always remove item immediately after lamination.
Pouch was not used.
Always put item in a pouch.
Pouch was not centered or straight when fed through Pouch/Document Entry.
Align sealed edge with Pouch/Document Entry. Use guide to center.
US: 1-800-945-4545 Canada: 1-800-665-4339 México: 1-800-234-1185 www.fellowes.com
Let our experts help you with a solution. Always call us first before contacting your place of purchase.
WARRANTY
Fellowes warrants all parts of the laminator to be free of defects in material and workmanship for 2 years from the date of purchase by the original consumer. If any part is found to be defective during the warranty period, your sole and exclusive remedy will be repair or replacement, at Fellowes’ option and expense, of the defective part. This warranty does not apply in cases of abuse, mishandling or unauthorized repair. ANY IMPLIED WARRANTY, INCLUDING THAT OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, IS HEREBY LIMITED IN DURATION
TO THE APPROPRIATE WARRANTY PERIOD SET FORTH ABOVE. IN NO EVENT SHALL FELLOWES BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES ATTRIBUTABLE TO THIS PRODUCT. This warranty gives you specific legal rights. You may have other legal rights that vary from this warranty. The duration, terms and conditions of this warranty are valid world-wide, except where different limitations, restrictions or conditions may be required by local law. For more details or to obtain services under this warranty, please contact us or your dealer.
Page 4 of 5
Text on page 5
Useful Phone Numbers
1789 Norwood Avenue, Itasca, Illinois 60143-1095 • USA • 630-893-1600
Australia Korea
Benelux Poland
Canada Russia
China Singapore
©2010 Fellowes, Inc. Inc. Part Part No. No. 404808 404808 2010 Fellowes,
Page 5 of 5 · End of manual
Quick start
- Plug in the laminator and leave enough space for items to pass freely through the machine.
- Switch the power on; the red power light turns on.
- Use the dial to select the pouch thickness (3, 4 or 5 mil). The LCD shows warm-up progress and the green flashing light turns solid when ready.
- Place the item inside the pouch against the sealed edge. Use a support sheet if the item is smaller than the pouch.
- Feed the pouch sealed edge first, straight, using the edge guide to center it.
- Remove the laminated item from the back immediately and let it cool on a flat surface.
- Before switching off, feed a piece of paper through to clean the unit.
Troubleshooting
| Problem | Likely cause | Fix (from the manual) |
|---|---|---|
| Ready light does not go on after an extended time | The laminator is in a hot, humid area. | Move the laminator to a cool, dry area. Page 4 |
| Pouch did not completely adhere to the item | The laminated item may be too thick. | Pass it through the laminator a second time. Page 4 |
| Jamming or poor results | The item was not removed immediately, no pouch was used, or the pouch was fed crooked. | Always put items in a pouch, align the sealed edge with the entry using the guide, and remove the item immediately after lamination. Page 4 |
Frequently asked questions
What pouch thicknesses does the EXL 45-3 take?
The temperature dial has settings for 3, 4 and 5 mil pouches. Only use pouches designed for the setting you select. See page 4.
How fast does it laminate?
Approximately 18 in. per minute at a fixed speed. See page 3.
Does it turn itself off?
Yes. It goes into stand-by if unused for over 15 minutes. To switch it back on, turn the power button off and then on. See page 3.
How do I avoid jams?
Use a support sheet when the item is smaller than the pouch, keep the pouch straight and centered, and remove the item from the back immediately. Never laminate an empty pouch. See page 3 and page 4.
What is the warranty?
Fellowes warrants all parts for 2 years from the date of purchase by the original consumer. See page 4.
