

Page 1 of 14

Text on page 2
Personal Laminator
Insert Seale d Edge First
AD Y
WER
Please read these instructions before use.
Lire ces instructions avant utilisation.
Lea estas instrucciones antes del usarlo.
Page 2 of 14

Page 3 of 14

Text on page 4
LAMINATOR CONTROLS
Insert Seal ed Edge First
RE AD Y
WER
QUICK START GUIDE
READY
READY
POWE
READY
POWER
READY
POWER
Insert Sealed Edge First
Insert Sealed Edge First
POW ER
READY
READY
READ
POWE POWER
POWER
POWE
Insert Sealed Edge First
REA
POW
POW
READ Y
READ Y
POW
Insert Sealed Edge First
READ Y
Insert Sealed Edge First
READ Y
POW
POW
Page 4 of 14

Text on page 5
ENGLISH
LAMINATOR CONTROLS
0OPGGTXJUDI
3FBEZ-&% (SFFO Release lever (
1PVDIEPDVNFOUFOUSZTMPU
1PVDIEPDVNFOUFYJU 1PXFSPO-&% 3FE
CAPABILITIES
'PSNBU
Entry width Pouch thickness 8BSNVQUJNF FTUJNBUF
- BNJOBUJPOTQFFE
Number of rollers 3FBEZJOEJDBUJPO Release lever Auto Shut Off
wNN A4 = 241mm 3-5 mil NJOVUFT BQQSPYwNJO mYFETQFFE
- JHIU (SFFO Yes Yes
Technical Data 7PMUBHF'SFRVFODZ $VSSFOU "NQT Wattage %JNFOTJPOT )Y8Y% Net weight .BYEPDVNFOUUIJDLOFTT MBNJOBUJOHDBQBDJUZ
7"$ )[ " 300 Watts wYwYw 3lb
IMPORTANT SAFETY INSTRUCTIONS - KEEP FOR FUTURE USE
- The machine is for indoor use only. Plug the machine into an easily accessible socket.
- To prevent electrical shock - do not use the appliance close to water, do not spill water on to the appliance, power cord or wall socket.
DO ensure the machine is on a stable surface. DO NOT leave the power cord in contact with hot DO test laminate scrap sheets and set the machine before surfaces. DO NOT leave power cord hanging from cupboards or final laminations. shelves. DO remove staples and other metal articles prior to laminating. DO NOT use appliance if the power cord is damaged. DO keep the machine away from heat and water sources. DO NOT attempt to open or otherwise repair the machine. DO turn off the machine after each use. DOVOQMVHUIFNBDIJOFXIFOOPUJOVTFGPSBOFYUFOEFE DO NOTFYDFFEUIFNBDIJOFTRVPUFEQFSGPSNBODF period. DO NOT allow children to use this machine without adult supervision. DO use pouches designed for use at the appropriate settings. DO NOT laminate sharp or metal objects (eg: staples, QBQFSDMJQT DO keep away from pets, while in use. DO NOT laminate heat-sensitive documents (eg: tickets, VMUSBTPVOETFUD POIPUTFUUJOHT DO NOT laminate with self-adhesive pouches on hot settings. DO NOT laminate an empty pouch.
Page 5 of 14

Text on page 6
FEATURES & TIPS
Auto Shut Off
‘Release’ function To remove or re-align a pouch during lamination, activate the release lever located on the back of the machine. The pouch can only be removed from the entry slot when the lever is activated. Auto Shut Off After 30 minutes of use the machine will automatically go in to Auto Shut Off mode. The Power LED will flash red for 5 minutes and then turn off. The ready LED will turn off. To continue using the NBDIJOFQSFTTUIF0/0''TXJUDI5IF machine will reset itself.
For best results, use Fellowes ® brand pouches: 3-5 mil. This machine does not need a carrier to laminate. It is a carrier-free mechanism. Always put the item to be laminated into the ap- QSPQSJBUFTJ[FEQPVDI "MXBZTUFTUMBNJOBUFXJUIBTJNJMBSTJ[FBOEUIJDLness before final process. Prepare pouch and item for lamination. Place item within pouch centered and touching the leading sealed edge. Ensure the pouch is not too large for the item.
- GSFRVJSFE USJNFYDFTTNBUFSJBMGSPNBSPVOEUIF item after lamination and cooling.
SETTING UP THE LAMINATOR
- Ensure the machine is on a stable surface.
- $IFDLUIFSFJTFOPVHIDMFBSTQBDF NJOw CFIJOE the machine to allow items to pass through freely.
- Plug the machine into an easily accessible main
HOW TO LAMINATE
- Switch the power on (located at the side of the
NBDIJOF
- The red ‘Power on’ lamp will light up. The machine is
- When the machine is ready, the green ‘Ready’ lamp
- Place the document into the open pouch. Ensure the
document is centered against the sealed edge. Use UIFBQQSPQSJBUFQPVDITJ[FGPSUIFEPDVNFOU
- Ensure the pouch enters the machine sealed edge
mSTU,FFQUIFQPVDITUSBJHIUBOEDFOUSBMXJUIJOUIF slot, not on an angle. Use the entry markings as a guide.
- 6QPOFYJU UIFMBNJOBUFEQPVDINBZCFIPUBOETPGU
To prevent jamming remove the pouch immediately. Place pouch on to a flat surface to cool. Take care when handling a hot pouch.
- To release a pouch during lamination, activate the
release lever located on the back of the machine. (FOUMZQVMMQPVDIPVUPGNBDIJOF
NEED HELP?
- FUPVSFYQFSUTIFMQZPVXJUIBTPMVUJPO
Customer Service... www.fellowes.com
Always call Fellowes before contacting your place of purchase, see the rear cover for contact details.
$POTJEFSSFHJTUFSJOHZPVSNBDIJOFBUXXXGFMMPXFTDPNSFHJTUFSUPSFDFJWFVQEBUFTBOEBEEJUJPOBMJOGPSNBUJPO
Page 6 of 14

Text on page 7
TROUBLESHOOTING
/PAQPXFSPOMBNQ SFE-&%
Machine not switched on
Switch on machine at the side and at the wall socket
No ‘ready’ lamp after a long QFSJPE HSFFO-&%
Machine is in a hot or humid area
Move the machine to a cooler and dry area
The Power LED is flashing red BOEUIF3FBEZ-&% HSFFO IBT turned off
The laminator has gone in to Auto Shut Off mode
1SFTTUIF0/0''TXJUDI5IFNBDIJOFXJMM
reset itself
5IFSFBEZMBNQ HSFFO BOEUIF
1PXFS-&% SFE IBWFUVSOFEPGG
The laminator is in Auto Shut Off mode
1SFTTUIF0/0''TXJUDI5IFNBDIJOFXJMM
reset itself
Pouch is lost in the machine
Pouch was used ‘open end’ first
Pouch was not centered on entry
Press release lever and pull out the item by hand
Pouch was not straight upon entry
Empty pouch was used
rollers or adhesive on
Pouch is damaged after lamination Damaged
rollers
Pass cleaning sheets through the machine to test and clean rollers
ImageLast logo did not disappear
Pass pouch through laminator a second time
STORAGE & CLEANING
Switch off the machine at the wall. Allow the machine to cool. The outside of the machine can be cleaned with a damp cloth. Do not use solvents or flammable materials to polish the machine. Cleaning sheets can be purchased for use with the machine. When the machine is warm – run the sheets through the machine to clean any residue off the rollers. For optimum performance, it is recommended that cleaning sheets are used with the machine regularly. (Cleaning sheet order DPEF
PRODUCT REGISTRATION / WORLDWIDE WARRANTY
Thank you for purchasing a Fellowes product. Please visit XXXGFMMPXFTDPNSFHJTUFS to register your product and benefit from product news, feedback and offers. Product details can be found listed on the rating plate positioned on the rear side or underside of the machine. Fellowes warrants all parts of the laminator to be free of defects in material and workmanship for 1 year from the date of purchase by the original consumer. If any part is found to be defective during XBSSBOUZQFSJPE ZPVSTPMFBOEFYDMVTJWFSFNFEZXJMMCFSFQBJSPSSFQMBDFNFOU BU'FMMPXFTPQUJPOBOEFYQFOTF PGUIF EFGFDUJWFQBSU5IJTXBSSBOUZEPFTOPUBQQMZJODBTFTPGBCVTF NJTIBOEMJOHPSVOBVUIPSJ[FESFQBJS"OZJNQMJFEXBSSBOUZ including that of merchantability or fitness for particular purpose, is hereby limited in duration to the appropriate warranty period set forth above. In no event shall Fellowes be liable for any consequential damages attributable to this product. This warranty gives you specific legal rights. You may have other legal rights that vary from this warranty. The EVSBUJPO UFSNTBOEDPOEJUJPOTPGUIJTXBSSBOUZBSFWBMJEXPSMEXJEF FYDFQUXIFSFEJGGFSFOUMJNJUBUJPOT SFTUSJDUJPOTPS conditions may be required by local law. For more details or to obtain services under this warranty, please contact Fellowes or your dealer.
Page 7 of 14

Text on page 8
FRANÇAIS F
LES COMMANDES DE LA PLASTIFIEUSE
- OUFSSVQUFVS.BSDIF"SSÐU 7PZBOUQSÐUËMFNQMPJ WFSU Levier de libération (
- PHFNFOUEFOUSÏFEFTQPDIFUUFTEPDVNFOUT 4PSUJFEFTQPDIFUUFTEPDVNFOUT 7PZBOUNJTFTPVTUFOTJPO SPVHF
CAPACITÉS
Performance 'PSNBU Largeur d’entrée Épaisseur des pochettes 5FNQTEÏDIBVGGFNFOU FTUJNÏ 7JUFTTFEFQMBTUJmDBUJPO
/PNCSFEFSPVMFBVY
7PZBOUEJOEJDBUJPO Levier de libération "SSÐUBVUPNBUJRVF
QPNN A4 = 241 mm 3-5 mil NJOVUFT FOWQPNJO WJUFTTFmYF
1SÐU WFSU
Oui 0VJ
Spécifications techniques 5FOTJPO'SÏRVFODF$PVSBOU "NQÒSFT 7$" )[ " Courant 300 Watts wQPYwQPYwQP %JNFOTJPOT )Y-Y1 Poids net 3 po ²QBJTTFVSNBYJNBMF des documents DBQBDJUÏEFQMBTUJmDBUJPO w NN
INSTRUCTIONS DE SÉCURITÉ IMPORTANTES - CONSERVER POUR UN USAGE FUTUR
- BNBDIJOFFTUSÏTFSWÏFËVOVTBHFËMJOUÏSJFVS#SBODIF[MBNBDIJOFTVSVOFQSJTFTFDUFVSGBDJMFNFOUBDDFTTJCMF
- Pour éviter tout risque d’électrocution - ne pas utiliser l’appareil près de l’eau, ne pas renverser d’eau sur l’appareil, le cordon d’alimentation ou la prise murale.
IL FAUT s’assurer que l’appareil soit sur une surface stable.
IL FAUT faire un essai de plastification sur des feuilles de rebut FUBKVTUFSMBQQBSFJMBWBOUEFQMBTUJmFSMFTEPDVNFOUTmOBVY
IL FAUT enlever les agrafes et autres pièces métalliques avant de plastifier.
IL FAUT garder l’appareil loin de toutes sources de chaleur et d’eau.
IL FAUT éteindre l’appareil après chaque usage.
IL FAUT débrancher l’appareil quand il n’est pas utilisé pour une période prolongée.
IL FAUT utiliser les pochettes conçues pour l’utilisation avec des réglages appropriés.
IL NE FAUT PAS laisser le cordon d’alimentation en contact avec des surfaces chaudes.
IL NE FAUT PAS laisser pendre le cordon d’alimentation des armoires ou des étagères.
IL NE FAUT PAS utiliser l’appareil si le cordon d’alimentation est endommagé.
IL NE FAUT PAS tenter d’ouvrir ou de réparer l’appareil.
IL NE FAUT PAS dépasser les caractéristiques de fonctionnement citées de l’appareil.
IL NE FAUT PAS laisser les jeunes enfants utiliser cette machine sans la supervision d’un adulte.
IL NE FAUT PAS plastifier des objets coupants ou métalliques
IL FAUTHBSEFSMBQQBSFJMMPJOEFTBOJNBVYEPNFTUJRVFTRVBOE FYBHSBGFT USPNCPOFT
IL NE FAUT PAS plastifier des documents sensibles à la chaleur il est utilisé. FYCJMMFUT VMUSBUTPOT FUD TVSEFTTVQQPSUTDIBVET
IL NE FAUT PAS plastifier à l’aide de poches auto-adhésives sur des supports chauds.
IL NE FAUT PAS plastifier une pochette vide.
Page 8 of 14

Text on page 9
CARACTÉRISTIQUES & CONSEILS
Auto Shut Off
Fonction « Libération » Pour retirer ou réaligner une pochette en cours EFQMBTUJmDBUJPO VUJMJTF[MFMFWJFSEFMJCÏSBUJPO situé à l’arrière de la machine. La pochette OFQFVUÐUSFSFUJSÏFEVMPHFNFOUEFOUSÏFRVF lorsque ce levier est actionné. Arrêt automatique Après 30 minutes d’utilisation, la machine TFNFUBVUPNBUJRVFNFOUFONPEFEBSSÐU automatique. Le voyant de mise sous tension clignote en rouge pendant 5 minutes puis TÏUFJOU-FWPZBOUQSÐUËMFNQMPJTÏUFJOU4J WPVTWPVMF[DPOUJOVFSËVUJMJTFSMBNBDIJOF BQQVZF[TVSMJOUFSSVQUFVSNBSDIFBSSÐUQPVS réinitialiser la machine.
1PVSEFNFJMMFVSTSÏTVMUBUT VUJMJTF[MFTQPDIFUUFTEF
marque Fellowes® : 3-5 mil. Cette machine n’a pas besoin de carton transporteur pour plastifier. Il s’agit d’un mécanisme sans carton transporteur. 1MBDF[UPVKPVSTMBSUJDMFËQMBTUmFSEBOTVOFQPDIFUUFEF taille appropriée. 'BJUFTUPVKPVSTVOFTTBJEFQMBTUJmDBUJPOBWFDMFTNÐNFT dimensions et épaisseur avant de procéder avec les EPDVNFOUTmOBVY 1SÏQBSF[MBQPDIFUUFFUMBSUJDMFËQMBTUJmFS1MBDF[ MBSUJDMFBVDFOUSFEFMBQPDIFUUFFUBQQVZF[TVSMFCPSE TDFMMÏBWBOU"TTVSF[WPVTRVFMBQPDIFUUFOFTUQBTUSPQ grande pour l’article. $PVQFSMFNBUÏSJFMFYDÏEFOUBVUPVSEVEPDVNFOUBQSÒT la plastification et le refroidissement.
INSTALLATION DE LA PLASTIFIEUSE
- "TTVSF[WPVTRVFMBNBDIJOFFTUTVSVOFTVSGBDF 3. #SBODIF[MBQQBSFJMEBOTVOFQSJTFÏMFDUSJRVFGBDJMF-
- 7ÏSJmF[RVJMZBJUTVGmTBNNFOUEFTQBDFMJCSF
QPNJOJNVN EFSSJÒSFMBNBDIJOFQPVSQFSNFUUSFMFT
articles de passer librement.
COMMENT PLASTIFIER
- .FUUF[FONBSDIF JOUFSSVQUFVSTJUVÏTVSMFDÙUÏEF 8. "TTVSF[WPVTRVFMBQPDIFUUFFOUSFEBOTMBNBDIJOF
MBNBDIJOF
- Le voyant rouge « Alimentation » s’allume. La
machine commence à chauffer.
- -PSTRVFMBNBDIJOFFTUQSÐUF MFWPZBOUWFSUj1SÐUx
- 1MBDF[MFEPDVNFOUEBOTMBQPDIFUUFPVWFSUF
QBSMFCPSETDFMMÏFOQSFNJFS(BSEF[MBQPDIFUUF
droite et bien centrée dans l’ouverture, et non pliée. 6UJMJTF[MFTNBSRVBHFTEFOUSÏFDPNNFHVJEF
- ®MBTPSUJF MBQPDIFUUFQMBTUJmÏFQFVUÐUSFDIBVEFFU
TPVQMF1PVSÏWJUFSMFTCPVSSBHFT SFUJSF[JNNÏEJBUF-
NFOUMBQPDIFUUF1MBDF[MBQPDIFUUFTVSVOFTVSGBDF QMBUFFUMBJTTF[MBSFGSPJEJS4PZF[QSVEFOUMPSTRVF WPVTNBOJQVMF[VOFQPDIFUUFDIBVEF
"TTVSF[WPVTRVFMFEPDVNFOUFTUCJFODFOUSÏDPOUSF
MFCPSETDFMMÏ6UJMJTF[VOFQPDIFUUFEFMBUBJMMF
- Pour retirer une pochette en cours de plastification, adaptée au document. VUJMJTF[MFMFWJFSEFMJCÏSBUJPOTJUVÏËMBSSJÒSFEF MBNBDIJOF5JSF[EPVDFNFOUMBQPDIFUUFIPSTEFMB machine
VOUS AVEZ BESOIN D’AIDE ?
- BJTTF[OPTFYQFSUTWPVTBJEFSBWFDVOFTPMVUJPO
7FVJMMF[UPVKPVSTBQQFMFS'FMMPXFTBWBOUEFDPOUBDUFSMFNBHBTJO7PJSËMBSSJÒSFEVDPVWFSDMFQPVSMFTDPPSEPOOÏT &OWJTBHF[EFOSFHJTUSFSWPUSFNBDIJOFËMBESFTTFXXXGFMMPXFTDPNSFHJTUFSQPVSSFDFWPJSEFTNJTFTËKPVSEFTEFT informations supplémentaires.
Page 9 of 14

Text on page 10
DÉPANNAGE
Pas de voyant d’alimentation (voyant SPVHF
La machine n’est pas allumée
"MMVNF[MBNBDIJOFTVSMFDÙUÏFUCSBODIF[MBQSJTF
murale
- FWPZBOU1SÐUOFThBMMVNFQBTBVCPVU EhVOFQÏSJPEFQSPMPOHÏF WPZBOUWFSU
La machine se trouve dans un lieu chaud ou humide
%ÏQMBDF[MBNBDIJOFWFSTVOMJFVQMVTGSBJTFUTFD
- FWPZBOUEFNJTFTPVTUFOTJPO SPVHF DMJHOPUFFUMFWPZBOUQSÐUËMFNQMPJ WFSU s’éteint.
- BQMBTUJmFVTFTFTUNJTFFONPEFEBSSÐU automatique.
"QQVZF[TVSMJOUFSSVQUFVSNBSDIFBSSÐUQPVS
réinitialiser la machine.
- FWPZBOUQSÐUËMFNQMPJ WFSU FUMF WPZBOUEFNJTFTPVTUFOTJPO SPVHF TF sont éteints.
- BQMBTUJmFVTFFTUFONPEFEBSSÐU automatique.
"QQVZF[TVSMJOUFSSVQUFVSNBSDIFBSSÐUQPVS
réinitialiser la machine.
La pochette s’est perdue dans la machine
La pochette a provoqué un bourrage
La pochette a été insérée bord ouvert en avant
La pochette n’était pas centrée à l’insertion
4ÏMFDUJPOOF[MFCPVUPOEFNBSDIFBSSJÒSFFUSFUJSF[
l’objet à la main
La pochette n’était pas droite à l’insertion
Une pochette vide a été utilisée
La pochette est endommagée après plastification
- FTSPVMFBVYTPOUFOEPNNBHÏTPVEF MBEIÏTJGFTUDPMMÏTVSMFTSPVMFBVY
1BTTF[EFTGFVJMMFTEFOFUUPZBHFEBOTMBNBDIJOFQPVS
UFTUFSFUOFUUPZFSMFTSPVMFBVY
Le logo ImageLast n’a pas disparu
La matière est plus épaisse
ENTREPOSAGE & NETTOYAGE
%ÏCSBODIF[MBNBDIJOFEFMBQSJTFNVSBMF"UUFOESFRVFMBNBDIJOFTFSFGSPJEJTTF-FYUÏSJFVSEFMBNBDIJOFQFVUÐUSF OFUUPZÏBWFDVOMJOHFIVNJEF/VUJMJTF[QBTEFTPMWBOUTPVEFNBUJÒSFTJOnBNNBCMFTQPVSOFUUPZFSMBQQBSFJM*MFTU QPTTJCMFEBDIFUFSEFTGFVJMMFTEFOFUUPZBHFËVUJMJTFSBWFDMBQQBSFJM2VBOEMBNBDIJOFFTUDIBVEFJOTÏSF[MFTGFVJMMFT EFOFUUPZBHFEBOTDFMMFDJQPVSOFUUPZFSMFTSPVMFBVYEFUPVUSÏTJEV1PVSEFTQFSGPSNBODFTPQUJNBMFT JMFTUSFDPNNBOEÏ d’utiliser régulièrement des feuilles de nettoyage sur la machine. (Codes de commande des feuilles de nettoyage N°
ENREGISTREMENT DU PRODUIT / GARANTIE MONDIALE
'FMMPXFTHBSBOUJURVFUPVUFTMFTQJÒDFTEFMBQMBTUJmFVTFTPOUFYFNQUFTEFUPVUFEÏGFDUVPTJUÏEFNBUÏSJFMFUEFGBCSJDBUJPO pendant 1 an à compter de la date d’achat par le consommateur initial. Si une pièce s’avère défectueuse durant la période EFHBSBOUJF WPUSFTFVMSFDPVSTTFSBMBSÏQBSBUJPOPVMFSFNQMBDFNFOUEFMBQJÒDFEÏGFDUVFVTF FUDF ËMBEJTDSÏUJPOFUBVY frais de Followes. Cette garantie ne couvre pas les cas de mauvais usage, mauvaise manipulation ou réparation non autorisée. Toute garantie implicite, y compris la qualité marchande ou l’adaptation à un usage particulier, est limitée dans sa durée à la période de garantie appropriée, tel qu’établi ci-dessus. En aucun cas, Fellowes ne sera tenue responsable pour UPVUEPNNBHFDPOTÏDVUJGPVBDDFTTPJSFBUUSJCVBCMFËDFQSPEVJU$FUUFHBSBOUJFWPVTEPOOFEFTESPJUTMÏHBVYTQÏDJmRVFT 7PVTQPVSSJF[BWPJSEBVUSFTESPJUTMÏHBVYEJGGÏSFOUTEFDFUUFHBSBOUJF-BEVSÏF MFTNPEBMJUÏTFUDPOEJUJPOTEFDFUUFHB- SBOUJFTPOUWBMBCMFTEBOTMFNPOEFFOUJFS TBVGEBOTMFDBTEFEJGGÏSFOUFTMJNJUFT SFTUSJDUJPOTPVDPOEJUJPOTRVJQFVWFOUÐUSF SFRVJTFTQBSMFTMPJTEJOUÏSÐUMPDBM1PVSEFQMVTBNQMFTSFOTFJHOFNFOUTPVQPVSPCUFOJSEFTTFSWJDFTTPVTDFUUFHBSBOUJF WFVJMMF[DPOUBDUFS'FMMPXFTPVWPUSFDPODFTTJPOOBJSF
Page 10 of 14

Text on page 11
ESPAÑOL S
CONTROLES DE LA PLASTIFICADORA
- OUFSSVQUPSEFFODFOEJEPBQBHBEP MV[-&%EFMJTUP WFSEF Palanca de liberación (
3BOVSBEFFOUSBEBEFCPMTBEPDVNFOUP
4BMJEBEFCPMTBEPDVNFOUP MV[-&%EFFODFOEJEP SPKB
CARACTERÍSTICAS
Rendimiento 'PSNBUP Ancho de entrada (SPTPSEFMBCPMTB Tiempo de calentamiento FTUJNBEP 7FMPDJEBEEFQMBTUJmDBEP
Número de rodillos
- OEJDBEPSEF-JTUP Palanca de liberación Apagado automático
QVMHNN
A4 = 241mm .JM
NJOVUPT
BQSPYwNJO WFMPDJEBEmKB
- V[ WFSEF Sí Sí
Información técnica 5FOTJØO'SFDVFODJB $PSSJFOUF "NQFSJPT 7$" )[ " Potencia 300 vatios Dimensiones BODIPYQSPGVOEJEBEYBMUVSB wYwYw Peso neto 3lb (SPTPSNÈYJNPEFMEPDVNFOUP DBQBDJEBEEFQMBTUJmDBEP NN QVMH
INSTRUCCIONES DE SEGURIDAD IMPORTANTES - GUARDAR PARA REFERENCIA FUTURA
- La máquina fue diseñada para usarse únicamente en interiores. Conecte la máquina a un tomacorriente de fácil acceso.
- Para evitar una descarga eléctrica, no utilice el aparato cerca de fuentes de agua; no derrame agua sobre el aparato, el cable de alimentación o el tomacorriente.
ASEGÚRESE de que la máquina se encuentre sobre una superficie estable. PRUEBE el plastificado en hojas de desecho y configure la máquina antes del plastificado final. RETIRE las grapas y otros objetos de metal antes de plastificar. MANTENGA la máquina alejada de fuentes de calor y agua. APAGUE la máquina después de cada uso. DESCONECTE la máquina del tomacorriente cuando no vaya a TFSVUJMJ[BEBQPSVOQFSÓPEPQSPMPOHBEP UTILICE las bolsas diseñadas para el uso con la configuración apropiada. MANTENGA la máquina alejada de mascotas cuando se esté VUJMJ[BOEP
NO deje el cable de alimentación en contacto con superficies calientes. NO deje el cable de alimentación colgando de armarios o repisas. NO utilice el aparato si el cable de alimentación está dañado. NO intente abrir o reparar la máquina de ninguna manera. NO supere el rendimiento previsto de la máquina. NO permita que los niños utilicen esta máquina sin la supervisión de un adulto. NO plastifique artículos afilados o de metal (p. ej., grapas, clips QBSBQBQFMFT NO plastifique documentos sensibles al calor (p. ej., boletos, VMUSBTPOJEPT FUD FODPOmHVSBDJPOFTFODBMJFOUF NO plastifique con bolsas autoadhesivas en configuraciones en caliente. NO plastifique una bolsa vacía.
Page 11 of 14

Text on page 12
CARACTERÍSTICAS Y CONSEJOS
Auto Shut Off
Función ‘Release’ Para quitar o volver a alinear una bolsa durante el plastificado, accione la palanca de liberación que se encuentra ubicada en la parte trasera de la máquina. La bolsa se podrá retirar de la ranura de entrada únicamente cuando la palanca esté accionada. Apagado automático Después de 30 minutos de uso, la máquina entrará automáticamente en el modo de "QBHBEPBVUPNÈUJDP-BMV[-&%EFFODFOEJEP parpadeará en rojo durante 5 minutos y luego TFBQBHBSÈ-BMV[-&%EFMJTUPTFBQBHBSÈ 1BSBDPOUJOVBSVUJMJ[BOEPMBNÈRVJOB QVMTF FMJOUFSSVQUPSEFFODFOEJEPBQBHBEP-B máquina se reiniciará.
CONFIGURAR LA PLASTIFICADORA
- Asegúrese de que la máquina esté sobre una
- Compruebe que haya suficiente espacio (mínimo 20 QVMH EFUSÈTEFMBNÈRVJOBQBSBQFSNJUJSRVFMPT
CÓMO PLASTIFICAR
- Encienda la máquina (el interruptor de encendido
FTUÈVCJDBEPFOFMMBUFSBMEFMBNÈRVJOB
- MBMV[-&%ASPKBEFFODFOEJEPTFJMVNJOBSÈ-B
máquina está ahora en calentamiento.
- $VBOEPMBNÈRVJOBFTUÏMJTUB MBMV[WFSEFEFi-JTUPw permanecerá encendida.
- Coloque el documento en la bolsa abierta. Asegúrese
Para obtener mejores resultados, utilice las bolsas Fellowes®: 3-5 mil. Esta máquina no necesita un transporte para plastificar. Es un mecanismo sin transporte. Siempre coloque el documento a plastificar en la bolsa de tamaño adecuado. Pruebe siempre el plastificado con un tamaño y grosor similares antes del proceso final. Prepare la bolsa y el artículo a plastificar. Coloque el ob- KFUPDFOUSBEPFOMBCPMTB UPDBOEPFMFYUSFNPEFTFMMBEP principal. Asegúrese de que la bolsa no sea demasiado grande para el objeto. 4JFTOFDFTBSJP SFUJSFFMFYDFTPEFNBUFSJBMEFBMSFEFEPS del objeto tras el plastificado y el enfriamiento.
3. Conecte la máquina a un tomacorriente de fácil
8. Asegúrese de que la bolsa entre a la máquina con el
FYUSFNPTFMMBEPQSJNFSP.BOUFOHBMBCPMTBEFSFDIB
y centrada dentro de la ranura, no en forma diagonal. Use las marcas de entrada como guía.
- Cuando sale, la bolsa plastificada puede estar
caliente y blanda. Para prevenir un atasco, retire inmediatamente la bolsa. Coloque la bolsa en una superficie lisa para que se enfríe. Tenga cuidado cuando manipule una bolsa caliente.
EFRVFFMEPDVNFOUPFTUÏDFOUSBEPDPOUSBFMFYUSFNP
sellado. Use el tamaño de bolsa adecuado para el
- Para retirar una bolsa durante el plastificado, accione documento. la palanca de liberación que se encuentra ubicada en la parte trasera de la máquina. Retire la bolsa de la máquina con cuidado.
¿NECESITA AYUDA?
%FKFRVFOVFTUSPTFYQFSUPTMPBZVEFODPOVOBTPMVDJØO
Servicio de Atención al Cliente... www.fellowes.com
Siempre llame a Fellowes antes de ponerse en contacto con el lugar de la compra. Consulte la cubierta trasera para obtener los detalles de contacto. $POTJEFSFSFHJTUSBSTVNÈRVJOBFOXXXGFMMPXFTDPNSFHJTUFSQBSBSFDJCJSBDUVBMJ[BDJPOFTFJOGPSNBDJØOBEJDJPOBM
Page 12 of 14

Text on page 13
RESOLUCIÓN DE PROBLEMAS
/PIBZMV[EFFODFOEJEPFOFM -&%
SPKB
La máquina no está encendida
Encender la máquina en el lateral junto a la toma de enchufe y a la toma de la pared
%FTQVÏTEFVOUJFNQP MBMV[EF
i-JTUPw -&%WFSEF OPTFFODJFOEF
- BNÈRVJOBFTUÈFOVOB[POBDBMJFOUF o húmeda
%FTQMBDFMBNÈRVJOBBVOB[POBNÈTGSÓBZTFDB
- BMV[-&%EFFODFOEJEPQBSQBEFBFO La plastificadora ha pasado al modo
SPKPZMBMV[-&%EFMJTUP WFSEF TFIB Apagado automático
apagado
- BMV[EFMJTUP WFSEF ZMBMV[-&%EF FODFOEJEP SPKB TFIBOBQBHBEP
La plastificadora está en el modo Apagado automático
La configuración de temperatura puede ser incorrecta
Revise que el grosor de la bolsa esté seleccionado correctamente y pásela de nuevo
Seleccione el botón marcha atrás y retire el objeto con la mano
La bolsa está atascada
1VMTFFMJOUFSSVQUPSEFFODFOEJEPBQBHBEP-B
máquina se reiniciará.
1VMTFFMJOUFSSVQUPSEFFODFOEJEPBQBHBEP-B
máquina se reiniciará.
La bolsa se ha perdido en el aparato
4FVUJMJ[ØMBCPMTBJOUSPEVDJFOEP
QSJNFSPFMAFYUSFNPBCJFSUP
La bolsa no estaba centrada al entrar
La bolsa no estaba derecha al entrar
4FVUJMJ[ØVOBCPMTBWBDÓB
La bolsa está dañada tras el plastificado
El logotipo de ImageLast no desapareció Mayor grosor del material
Pase el estuche por la plastificadora por TFHVOEBWF[
ALMACENAMIENTO Y LIMPIEZA
%FTDPOFDUFMBNÈRVJOBEFMUPNBDPSSJFOUF%FKFFOGSJBSMBNÈRVJOB4FQVFEFMJNQJBSMBQBSUFFYUFSJPSEFMBNÈRVJOBDPO un trapo húmedo. No utilice disolventes ni materiales inflamables para limpiar la máquina. Se pueden comprar toallitas MJNQJBEPSBTQBSBVUMJ[BSFOMBNÈRVJOB$VBOEPMBNÈRVJOBFTUÏDBMJFOUF QBTFMBTUPBMMJUBTQPSMBNÈRVJOBQBSBMJNQJBS los residuos de los rodillos. Para un desempeño óptimo, se recomienda que las toallitas limpiadoras se usen regularmente QBSBMJNQJBSMBNÈRVJOB 5PBMMJUBTMJNQJBEPSBTDØEJHPEFQFEJEP
REGISTRO DEL PRODUCTO / GARANTÍA MUNDIAL
'FMMPXFTHBSBOUJ[BEVSBOUFB×PEFTEFMBGFDIBEFDPNQSBEFMDPOTVNJEPSPSJHJOBMRVFUPEBTMBTQBSUFTEFMBQMBTUJficadora carecen de defectos materiales y de fabricación. Si durante dicho período de garantía se observase que alguna QJF[BFTEFGFDUVPTB MBÞOJDBZFYDMVTJWBTPMVDJØOTFSÈMBSFQBSBDJØOPTVTUJUVDJØOHSBUVJUBEFMBNJTNB BEJTDSFDJØOZQPS DVFOUBEF'FMMPXFT&TUBHBSBOUÓBOPDVCSJSÈFODBTPEFBCVTP NBMBVUJMJ[BDJØOPSFQBSBDJØOOPBVUPSJ[BEB5PEBHBSBOUÓB implícita, incluida la de comerciabilidad o idoneidad para un fin concreto, queda limitada por la presente a la duración del período de garantía pertinente establecido más arriba. En ningún caso, Fellowes se hará responsable de cualquier daño consecuente atribuible a este producto. Esta garantía le otorga derechos legales específicos. Es posible que le asistan otros derechos legales además de los de esta garantía. La duración, términos y condiciones de esta garantía son válidos en todo FMNVOEP FYDFQUPDVBOEPMBTMFZFTMPDBMFTQVFEBOFYJHJSMJNJUBDJPOFT SFTUSJDDJPOFTPDPOEJDJPOFTEJGFSFOUFT1BSBPCUFOFS más detalles o para obtener los servicios previstos en esta garantía, comuníquese con Fellowes o con su distribuidor.
Page 13 of 14

Text on page 14
FCC CLASS B NOTICE
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: t3FPSJFOUPSSFMPDBUFUIFSFDFJWJOHBOUFOOB t*ODSFBTFUIFTFQBSBUJPOCFUXFFOUIFFRVJQNFOUBOESFDFJWFS t$POOFDUUIFFRVJQNFOUJOUPBOPVUMFUPOBDJSDVJUEJGGFSFOUGSPNUIBUUPXIJDIUIFSFDFJWFSJTDPOOFDUFE t$POTVMUUIFEFBMFSPSBOFYQFSJFODFESBEJP57UFDIOJDJBOGPSIFMQ $"/"%"$-"44#/05*$&"7*4$"/"%" $-"44&# This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. MODIFICATIONS "OZNPEJmDBUJPOTNBEFUPUIJTEFWJDFUIBUBSFOPUBQQSPWFECZ'FMMPXFTNBZWPJEUIFBVUIPSJUZHSBOUFEUPUIFVTFSCZUIF'$$BOEPSCZ Industry Canada to operate this equipment. 5PVUFTNPEJmDBUJPOTBQQPSUÏFTËDFEJTQPTJUJGFUOPOBQQSPVWÏFTQBS'FMMPXFTBOOVMFSPOUMFESPJUBDDPSEÏËMVUJMJTBUFVSQBSMF'$$FUPVQBS Industrie Canada de faire fonctionner cet équipement.
Help Line
.FYJDP
2017 Fellowes, Inc. Part No. 410639
Page 14 of 14 ยท End of manual
Quick start
- Place the laminator on a stable surface with enough clear space behind it, and plug it into an easily accessible outlet.
- Switch the power on at the side of the machine. The red Power On light comes on while it heats.
- Wait for the green Ready light.
- Put the document in a 3-5 mil pouch, centered and touching the sealed edge.
- Insert the pouch sealed edge first, straight and centered, using the entry markings as a guide.
- Remove the pouch as soon as it exits and let it cool on a flat surface. To pull a pouch back out, use the release lever on the back.
Troubleshooting
| Problem | Likely cause | Fix (from the manual) |
|---|---|---|
| No red Power On light | Machine not switched on | Switch on at the side of the machine and at the wall socket. Page 7 |
| No green Ready light after a long time | Machine is in a hot or humid area | Move the machine to a cooler, dry area. Page 7 |
| Power light flashing red and Ready light off, or both lights off | The laminator has gone into Auto Shut Off mode | Press the ON/OFF switch. The machine will reset itself. Page 7 |
| Pouch is lost in the machine | Pouch fed open end first, not centered, not straight, or an empty pouch was used | Press the release lever and pull the item out by hand. Page 7 |
| Pouch is damaged after lamination | Damaged rollers or adhesive on the rollers | Pass cleaning sheets through the machine to test and clean the rollers. Page 7 |
| ImageLast logo did not disappear | Pouch needs another pass | Pass the pouch through the laminator a second time. Page 7 |
Frequently asked questions
What pouch thickness does the M5-95 take?
3-5 mil pouches. Fellowes brand pouches are recommended. See page 6.
Why did my laminator turn off by itself?
After 30 minutes of use it goes into Auto Shut Off. The Power light flashes red for 5 minutes and then turns off. Press the ON/OFF switch to reset it.
Do I need a carrier?
No. The M5-95 is carrier-free.
How do I remove a crooked pouch?
Activate the release lever on the back of the machine and gently pull the pouch out.
How do I clean the rollers?
Run cleaning sheets through the machine while it is warm, and use them regularly. Clean the outside with a damp cloth only. See page 7.
