Page 1 of 10
Text on page 2
Electric Paper Trimmer
PowerTrim
Please read these instructions before use.
Lire ces instructions avant utilisation.
Lea estas instrucciones antes del usarlo.
TM
Page 2 of 10
Page 3 of 10
Page 4 of 10
Text on page 5
ENGLISH
CAPABILITIES
Performance Cutting length Max cutting capacity Trimming mechanism PowerSave Auto Shut-off
16.5” / 420mm 30 sheets / 20lb Electric trimming 30min
Technical Data Main voltage 120V AC Frequency 50/60Hz Wattage 80 Watts Amps 1.8 Amps Max. Machine rating 24V DC / 1.8 Amps Dimensions (WxDxH) 24.5” x 12” x 4.75” / 620 x 300 x 120mm Net weight 11lbs / 5 kg
IMPORTANT SAFETY INSTRUCTIONS
CAUTION: Please read before use and keep for future reference.
Warning - blades are extremely sharp when exposed.
When trimming: DO ensure the machine is on a stable surface. DO plug the machine into an easily accessible socket. DO test cuts on scrap sheets before trimming final documents. DO remove staples and other metal articles prior to trimming. DO keep the machine away from heat and water sources. DO turn off the machine after each use. DO switch off and unplug PowerTrim when not in use.
DO NOT leave the power cord in contact with hot surfaces. DO NOT leave electric cord hanging from cupboards or shelves. DO NOT use appliance if the power cord is damaged. DO NOT exceed the machines quoted performance. DO NOT open or attempt to repair, as this will void your warranty. Contact Customer Service if you have any questions.
PRODUCT REGISTRATION
Thank you for purchasing a Fellowes product. Please visit www.fellowes.com/register to register your product and benefit from product news, feedback and offers. Product details can be found listed on the rating plate positioned on the rear side or underside of the machine.
NEED HELP?
Let our experts help you with a solution. You’ll find the numbers for your nearest service center on the back cover of this manual.
Customer Service:
www.fellowes.com
Page 5 of 10
Text on page 6
TRIMMER CONTROLS
On/off switch (at side)
Overload protection - Paper gauge
Cut-Control LED touch pad
Illuminated LED cutting bed
SafeCut ™ Clamp
SafeCut™ Guard (at rear) to protect internal mechanism
- with power breaker (magnetic closure)
Window for paper alignment
FEATURES & TIPS
FEATURES
TIPS
SafeCut™ Guard Ensures that power supply is stopped when guard is opened – for service and maintenance.
SafeCut™ Clamp Ensures that paper is securely clamped before trimming – trimmer won’t cut when SafeCut™ Clamp is not closed.
Electric trimming The ultimate trimming solution for safety and comfort – PowerTrim Electric trimming.
Always clamp paper down with SafeCut™ Clamp before trimming. Make sure paper is properly adjusted. Replace blade unit every 2000 cuts and cutting strip every 500 cuts or when showing signs of wear. Item number for accessory pack # 54125. Align cut line with the outer edge of the orange trimline. For best results, mark the exact cut position on the item before trimming and try trimming a test sheet.
Cut Control function LED touch pad with Start-Stop function to start and stop trimming . User can stop trimming if finished before cycle of 6 cuts has ended.
WORLDWIDE WARRANTY
Fellowes warrants all parts of the trimmer to be free of defects in material and workmanship for 2 years from the date of purchase by the original consumer. If any part is found to be defective during warranty period, your sole and exclusive remedy will be repair or replacement, at Fellowes’ option and expense, of the defective part. This warranty does not apply in cases of abuse, mishandling or unauthorized repair. Any implied warranty, including that of merchantability or fitness for particular purpose, is hereby limited in duration to the appropriate warranty period set forth above. In no event shall Fellowes be liable for any consequential or incidental damages attributable to this product. This warranty gives you specific legal rights. You may have other legal rights that vary from this warranty. The duration, terms and conditions of this warranty are valid worldwide, except where different limitations, restrictions or conditions may be required by local law. For more details or to obtain services under this warranty, please contact Fellowes or your dealer.
Page 6 of 10
Text on page 7
BEFORE TRIMMING
Ensure the machine is on a stable surface. Check that there is enough clear space behind the machine to allow trimmed items to pass through freely.
Connect the supplied power lead to the machine.
Plug the power lead in to an easily accessible main socket. Switch the main supply on.
STEPS TO TRIM
Switch the power on.
Insert document to trim. Use the document gauge at the sides of the cutting base to check that items do not exceed maximum capacity.
- PowerTrim will complete 3 cut cycles (of 6 cuts) for
Use transparent window with orange trimline guide to quickly and accurately align your cuts. Align cut line with the outer edge of the orange trimline. For best results, mark the exact cut position on the item before trimming and try trimming a test sheet.
Alternatively, align item with the cut dimensions on the base of the trimmer.
Secure document with SafeCut™ Clamp, the Cut- Control LED touch pad will light up blue.
To trim press the Cut-Control LED touch pad. When touched, the Cut-Control LED will light up in pink and then turn flashing blue when it is cutting.
cutting max 30 sheets (20lb). To stop cutting press the Cut-Control LED touch pad.
- Release clamping mechanism again before removing
items from cutting bed.
Page 7 of 10
Text on page 8
BLADE UNIT REPLACEMENT
Unplug PowerTrim. Remove SafeCut™ Guard (magnetic catch).
Unscrew the 2 cross head screws on either side of the cutter blade unit (Phillips type screwdriver).
Remove the cutter blade unit by pulling the button on the blade unit. Replace with new blade unit (#54125).
Tighten screws. Re-secure SafeCut™ Guard.
CHANGING CUTTING STRIPS
Unplug PowerTrim. Remove SafeCut™ Guard (magnetic catch).
Make sure SafeCut™ Clamp is open.
Rotate small safety catches to release the cutting strip. Turn cutting strip over to use other side of the strip . When all areas have been used, replace cutting strip with new one from accessory pack (#54125). Re-secure cutting strip and SafeCut™ Guard again.
REPLACEMENT ACCESSORIES
The following replacement parts are available for PowerTrim as a combined accessory pack (#54125):
Page 8 of 10
Text on page 9
TROUBLESHOOTING AND LED INDICATORS
Scissor icon is ON. Base LED lights are ON
Ready to trim (clamped down and all covers closed)
Scissor Icon is OFF. Base LED lights are ON
SafeCut Clamp is open
Insert item and close SafeCut Clamp
Turn on main supply and switch on machine
SafeCut Guard is open
Ensure SafeCut Guard is correctly closed
Scissor icon flashing BLUE (FAST). Base Trimming in progress lights are ON
Scissor icon flashing BLUE (SLOW). Base lights are OFF
Paper is cut, machine is still operating
Machine will cut for 3 cut cycles (or 6 cuts) automatically
Scissor icon flashes RED and BLUE. Base lights are ON
Check SafeCut Clamp is closed and SafeCut Guard is correctly closed
Scissor icon is RED. Base lights are OFF
Error. Machine is hot
Machine must cool for 30 minutes (minimum)
Worn cutting strips or worn blades
Flip cutting strip and use reverse side. Check blade quality. Replace from accessory pack (CRC 54125)
Scissor Icon is OFF. Base LED lights are OFF
Scissor icon is PINK + beep sound
Page 9 of 10
Text on page 10
FCC CLASS B NOTICE
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
CANADA CLASS B NOTICE - AVIS CANADA, CLASSE B This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. MODIFICATIONS Any modifications made to this device that are not approved by Fellowes may void the authority granted to the user by the FCC and/or by Industry Canada to operate this equipment. Toutes modifications apportées à ce dispositif et non approuvées par Fellowes annuleront le droit accordé à l’utilisateur par le FCC et/ou par Industrie Canada de faire fonctionner cet équipement.
1789 Norwood Avenue, Itasca, Illinois 60143-1095 • USA • 630-893-1600 fellowes.com
Australia Benelux
Canada China
Deutschland España
France Italia
Japan Korea
2009 Fellowes, Inc. Part No. 403954-1
Polska Singapore
United Kingdom United States
Page 10 of 10 ยท End of manual
Quick start
- Place the trimmer on a stable surface with clear space behind it for trimmed items to pass through.
- Connect the supplied power lead, plug it into an easily accessible socket and switch the power on.
- Insert the document and use the gauge at the sides of the cutting base to check it does not exceed 30 sheets (20 lb).
- Align the cut line with the outer edge of the orange trimline in the window, or use the dimensions on the base.
- Close the SafeCut Clamp; the Cut-Control touch pad lights blue.
- Press the Cut-Control touch pad to trim. It runs 3 cut cycles (6 cuts); press again to stop early.
- Release the clamp before removing items from the cutting bed.
Troubleshooting
| Problem | Likely cause | Fix (from the manual) |
|---|---|---|
| Scissor icon off, base lights on | The SafeCut Clamp is open. | Insert the item and close the SafeCut Clamp. Page 9 |
| Scissor icon and base lights both off | No power to the machine. | Turn on the main supply and switch on the machine. Page 9 |
| Scissor icon flashes red and blue | The SafeCut Clamp or SafeCut Guard is not correctly closed. | Check that the SafeCut Clamp is closed and the SafeCut Guard is correctly closed. Page 9 |
| Scissor icon is red, base lights off | The machine is hot. | Let the machine cool for at least 30 minutes. Page 9 |
| Scissor icon pink with a beep, or poor cuts | Worn cutting strip or worn blades. | Flip the cutting strip to use the reverse side, check the blade, and replace parts from accessory pack 54125. Page 9 |
Frequently asked questions
How many sheets can the PowerTrim cut at once?
Up to 30 sheets of 20 lb paper, with a cutting length of 16.5" (420mm). See page 5.
How often should the blade and cutting strip be replaced?
Replace the blade unit every 2000 cuts and the cutting strip every 500 cuts, or sooner if worn. Both come in accessory pack 54125. See page 6.
How do I replace the blade unit?
Unplug the trimmer, remove the magnetic SafeCut Guard, unscrew the 2 Phillips screws on either side of the blade unit, pull it out, fit the new unit (54125), tighten the screws and refit the guard. See page 8.
Does the PowerTrim turn itself off?
Yes. It has a PowerSave auto shut-off after 30 minutes. See page 5.
What is the warranty?
Fellowes warrants all parts of the trimmer for 2 years from the date of purchase by the original consumer. See page 6.
