Text on page 1
Fujipla Almeister
ALM3220
Page 1 of 11
Text on page 2
Chart No.5：Deletion. Chart No.6 is changed volume.
Chart No.11 is modified.
REV
Page 2 of 11
Text on page 3
Part No. 967063 967022 967005 967006
ALM3220(AC120V) Fig.1 Part Name Feeder Tray Assy(US) Extension Tray Feeding Roller E Feeding Roller
Upper Feeding (Transport) Roller Sprocket 12T-12 Sprocket 13T-12 Feeder Cover Heating Roller(Pull Roller) Chamber Chamber(Silver) Press Plate Cam Cutter Unit Cutter Unit Component Exchange(Rotary Blade)
Cutter Unit Component Exchange(Rotary Blade & Related Parts)
Upper Transport Roller Lower Transport Roller Trimmer Unit(US)
Trimmer Unit Component Exchange(Rotary Blade)
Rear Tray(US) Operation Panel Cover Front Door Exit Cover Upper Film Roll Cover Rear Side Cover Right Side Cover
：applied to M/C No.0000649 and above, also applicable to below this M/C No.0000649. ：applied to M/C No.0000007 and above, also applicable to below this M/C No.0000007.
Chart No.5：Deletion. Chart No.6 is changed volume.
Chart No.11 is modified.
REV
Page 3 of 11
Text on page 4
REV
added detail part Name.
charts No.12 is modified .
Page 4 of 11
Text on page 5
Part No. 967035 967036 967037 967038 967025 967026 967041 967042 967045 967046 967039 967047 967061 963001 967001 967002 967003 967004 967048 967040 967049 967054
Part Name Oiless Bearing Oiless Bearing Oiless Bearing Oiless Bearing(LED-0807) Sprocket Sprocket Chain Chain Torque Limitter One-way Clutch Bearing Oiless Bearing Chamber Cap Chamber Cap Tension Knob Upper Mandrel Holder ① Lower Mandrel Holder ① Upper Mandrel Holder ② Lower Mandrel Holder ② Stripper Bolt Oiless Bearing Magnet Catch Handle
: applied to M/C No.0000181 and above, also applicable to below this M/C No.0000181. : added detail part Name. applicable to all M/C No.
REV
added detail part Name.
Chart No. 12 is modified.
Page 5 of 11
Text on page 6
No.3,4 is modified、No.10 is changed Volume.
No.13 to No.20：part separated and named.
REV
Part No. and Part Name changed.
Page 6 of 11
Text on page 7
No.
Part No. 967035 967039 967027 967085 967028 967086 967043 967025 967046 967060 967055 967066 967058 967059 967057 967068 967069 967073 998992 967076 967077 967078 967079 967080
ALM3220(AC120V) Fig.3
Part Name Oiless Bearing Oiless Bearing Sprocket Sprocket(13T) Sprocket Sprocket(14T) Chain Sprocket One-way Clutch Bearing Pulley Wire Wire Set(φ1.1ｍｍ） Rotary Blade Counter Blade Split Pin Cutter Cover Film Guide Pulley Fitting Cutter Motor Gear 30T Stripper Bolt M4 Gear 20T Spacer Side Plate
Qt'
: applied to M/C No.0000171 and above, also applicable to below this M/C No.0000171.
: applied to M/C No.0000181 and above, also applicable to below this M/C No.0000181.
5 : applied to M/C No.0000274 and above, also applicable to below this M/C No.0000274.
No.3,4 is modified、No.10 is changed Volume.
No.13 to No.20：part separated and named.
Chart No. 9 is modified.
REV
Part No. and Part Name changed.
Page 7 of 11
Text on page 8
Chart No. 9 is modified.
charts No.8 is modified .
REV
Page 8 of 11
Text on page 9
Part No. 998917 998918 998919 998922 998926 998927 998928 998929 998985 998933 998934 998936 998948 998937 998941 998945
Part Name PCB (CPU) PCB (DRIV) PCB (PANEL) 24V Regulator Manual Switch for Lamination Manual Switch for cutting Feeder Sensor, Discharge Sensor Cutting Position Sensor Cutting Position Sensor LCD(US) LCD(PC2004ARS-AWA-A) Stopper Motor, Trimmer Motor Feeder Motor Lamination Motor Driver FAN(Heater) Operation Panel
: applied to M/C No.0000031 and above only. : applied to M/C No.0000360 also applicable to below this M/C No.0000360
Chart No. 9 is modified. Chart No. 8 is modified.
REV
Page 9 of 11
Text on page 10
REV
Page 10 of 11
Text on page 11
Part No. 998920 998921 998986 998924 998925 998930 998931 998932 998935 998936 998939 998938 998940 998942 998989 998944
Part Name Power Socket 5V Regulator Heater(120V/400W) Thermostat Thermistor Power Switch Cover Switch(SIGNAL) Cover Switch(POWER) SSR Stopper Motor, Trimmer Motor Lamination Motor Lamination Motor Gear Head FAN(Machine) Flap Solenoid Power Cable(US) Terminal
REV
Page 11 of 11 ยท End of manual
Quick start
- Find the figure for the area of the machine (feeder and covers, drive parts, cutter, electrical).
- Match the part name to its part number.
- Check the machine number (M/C No.) notes, since some parts apply only above or below a given serial number.
Frequently asked questions
What is the part number for the ALM3220 heater?
Heater (120V/400W), part no. 998986. See page 11.
What is the part number for the CPU board?
PCB (CPU) is 998917; PCB (DRIV) is 998918 and PCB (PANEL) is 998919. See page 9.
What are the motor part numbers?
Feeder motor 998937, stopper motor/trimmer motor 998936, lamination motor 998939 and lamination motor gear head 998938. See page 9 and page 11.
What are the thermostat and thermistor part numbers?
Thermostat 998924 and thermistor 998925. See page 11.
What is the part number for the US power cable?
Power Cable (US), part no. 998989. See page 11.
