Text on page 1
GBC/ Swingline Proclick
Binding Machines
For Models: ProClick 110 Manual ProClick P210E Electric
Provided by
Page 1 of 5
Text on page 2
GBC. ProClickP210E Binding Systems
Instruction Manual
ACCO Brands 300Tower Parkway ling IMPORTANT Lincolnshire,I600693640 ACCO 18005410094 To register this product go to www.gbc.com BRANDS gbc.com C2007 ACC0 Brands.Allrights reserved
Page 2 of 5
Text on page 3
Limited One Year Warranty
purchase that this GBC product is free from defects in workmanship and material under normal useand service.GBC's obligation under this warranty is limited to replacement or repair,at GBC's option,of any
refurbishedparts.This warranty shall be void if the product has been misused,damaged by negligence or
Inconsistentwith,Orinadditiontothiswarrantyareunauthorizedandshallnotbe
Bindingupongbc.Innoeventshallgbcbeliableforanyspecialincidentalor
Consequentialdamages,Whetherornotforeseeable.Anyimpliedwarrantiesarelimitedin
Durationtothedurationofthiswarranty.Somestatesdonotallowtheexclusionor
Limitationofspecialincidentalorconsequentialdamagesorimpliedwarranties,Sothe
ABOVE EXCLUSION OR LIMITATION MAY NOT APPLY TO YOU
to state.
FCC Class A Notice-Notification pour es Etats-tnis
hemtu mterference when tte eouiomet is operaled in a commercial envinenment. This equipent
This: Class A digital epparatus comiplies with Canadiae ICES-003
Specifications P110,P210E 11.7" (297mm-A4) Max.width of paper Punching capacity.paper 15 sheets (20 b./80gsm) Binding capacity 110 sheets (1-1/2"/38mm) Net weight
Dimensions (HxWxD)
Subject to technical changes without prior notice
Page 3 of 5
Text on page 4
Bind Document
Punch Paper
Guide Right TM
Edge Guide Cower Insert Paper
Figure1 Figure2 Figure6 Figure7
Squeeze here
Align sheet
Punch Lever
Figure3 Figure 4-P110 only Figure 5-P210Eonly Figure 8 Figure 9 A.PUNCHING PAPER (see Figure 1) Place your punched document on the spine. North America only Your machine has an adjustable Guide Right TM edge guide for aligning both 3. Use the zip tool to close the spine. lettersize documents andoversizecovers.fpunching a lettersizedocument,slidethe Guide (see Figure 9)
- Remove your finished document by sliding the
Right tM edge guide alltheway in,toward the machine.lfpunching an oversizecover,slide the Guide Right TM edge guide all theway out,towardyou. spine out from under the hooks.
- Insert the document orcover tobe punched into the ProClickP110'sorP210E's punch C.EMPTYCHIPDRAWER opening.(see Figure 2) 1. Your ProClickP210E has a chip drawer
- Align the document or cover so that it is flush with the edge guide to ensure an accurate locatedon theright side of the machine
Chip Drawer
punch.(see Figure 3) (seeFigure 10).0n theP210E,an indicator
light located above the punch button will
- P110-Pull down and firmly depress the punching lever to ensurea complete punch. Figure 10 illuminate whenit is full.To empty, gently pull (see Figure 4)
the drawer open and remove it from the
B.Binding
P210E-Press punch button on left of machine to punch (see Figure 5) 1. Secure a GBC ProClick spine under the machine.Dispose of the contentsandre-insert Note:To ensure clean punching.do not punchmore than one plastic cover at a time. hooks on top of the P110 or P210Ewith the drawer into the machine until it snapsin
the open spine rings facing up. place. (see Figures 6and 7)
- Align punched holes in your document D.SERVICE with corresponding rings on the binding 1. Contact an authorized GBC service spine. (see Figure 8) representative for any required repairs.
Vh enT mage Matters
Page 4 of 5
Text on page 5
Safety Instructions forProClickP210E Only the product.
Safety Messages
Lift themachine from the bottom,notthecover.
Your safety as well as the safetyof otherss
important to GBC.In this Instruction Manual and on Do not lift the machine by the cover or Guide the product are important safety messages.Read RightTM edge guide. these messages carefully.
The safety alert symbol precedes eachsafety ELECTRICAL SAFEGUARDS
message in this Instruction Manual.This TheProClickP210Emust be connected to a supply symbol indicates a potential personal safety hazard voltage corresponding to the electrical rating of the that could hurt you orothers,as well as cause machine as indicated on the serial/rating plate or product or property damage. in this manual. The following warning is found on this unit: CAUTION:THE POWER RECEPTACLE MUST BE This safety message means you could be seriously LOCATED NEAR THE EQUIPMENT AND BE hurt or killed if you open the product and expose EASILY ACCESSIBLE. yourself to hazardous voltage. Unplug the ProClickP210Ebefore moving it, orwhenit is not inuse for an extended period
Awarning
of time. Do not operate with a damaged supply cord or
damaged in any manner. Do not overload electricai outlets beyond their capacity as this can result in fire or electrical The following symbols appear on this productand their meanings are as follow: Do not alter attachment plug.Plug is configured =PUNCHPAPER
Poweron
for the appropriate electrical supply. The unit is intended for indoor use only.
Poweroff
Never push objects into this product through STANDBY CHIP TRAY FULL cabinet slots.Do not spillliquid of anykind on this product. Do not operate if the product has been exposed WARNING:For your protection,do not to rain or water. connect the ProClickP210E to electrical power until youread these instructions completely. SERVICE Keep these instructions ina convenient location for Do not attempt to service orrepair theProClick future reference.To guard against injury,the P210Eyourself.Unplug the unit andcontacf an following basic safety precautions must be authorized GBC service representative for any observed in the set-up anduse of thisproduct.
Important Safeguards
Use the ProClick P210Eonly for its intended CLEANING CAUTioN: Unplug this product before cleaning purpose ofpunching andbinding paper and Wipe exterior only with a damp cloth.Do not covers according to the indicated specifications. use detergents or solvents.
Do not place anything in the punch opening of the machine other than paperand cover stock. Place unit ona secure,stable work area to prevent themachine falling and possibly causing personal injury and damage to the unit. Follow all wanings and instructions markedon
Page 5 of 5 · End of manual
Quick start
- Place it safely: Put the machine on a secure, stable work area. Lift it from the bottom, not the cover. P210E only: plug into a supply matching the rating plate.
- Set the edge guide: Slide the Guide Right edge guide all the way in for letter size documents. Slide it all the way out for oversize covers.
- Insert paper: Put the document or cover into the punch opening. Align it flush with the edge guide.
- Punch: On the P110, pull down and firmly press the punch lever. On the P210E, press the punch button on the left. Punch only one plastic cover at a time.
- Load the spine: Secure a GBC ProClick spine under the hooks on top of the machine with the open rings facing up.
- Bind: Align the punched holes with the rings on the spine. Place the document on the spine.
- Close: Use the zip tool to close the spine. Slide the finished document out from under the hooks.
Troubleshooting
| Problem | Likely cause | Fix (from the manual) |
|---|---|---|
| Incomplete punch | The punch was not fully pressed. | On the P110, pull down and firmly press the punch lever for a complete punch. Page 4 |
| Inaccurate punch position | The sheet is not flush with the edge guide. | Align the document or cover flush with the edge guide. Page 4 |
| Unclean punching on covers | More than one plastic cover was punched at once. | Punch only one plastic cover at a time. Page 4 |
| Chip tray full light on (P210E) | The chip drawer is full. | Gently pull the chip drawer open and remove it. Dispose of the contents and push it back until it snaps in place. Page 4 |
| Machine needs repair | A fault or damage. | Do not repair it yourself. Unplug it and contact an authorized GBC service representative. Page 5 |
| Machine dropped or damaged when lifted | It was lifted by the cover or edge guide. | Lift the machine from the bottom, not the cover or Guide Right edge guide. Page 5 |
Frequently asked questions
How many sheets can the ProClick punch and bind?
The specifications list a punching capacity of 15 sheets of 20 lb paper and a binding capacity of 110 sheets (1-1/2 inch). See page 3.
What is the difference between the P110 and P210E?
The P110 is punched with a lever. The P210E is electric and has a punch button and a chip tray full light. See page 4.
How do I empty the chip drawer?
On the P210E, the chip drawer is on the right side. Gently pull it open, remove it, dispose of the chips and push it back until it snaps in. See page 4.
How do I punch oversize covers?
Slide the Guide Right edge guide all the way out toward you. For letter size, slide it all the way in. See page 4.
How do I clean the P210E?
Unplug it and wipe the exterior only with a damp cloth. Do not use detergents or solvents. See page 5.
