Page 1 of 2
Text on page 2
- Choose a level location for your Triumph Display Easel.
- The Triumph Display Easel is adjustable at 37" and 62" high.
To adjust the height of the easel, simply:
2.1 Spread the three legs by snapping each leg away from the
support braces.
2.2 Locate the snap button and gently depress while sliding the
lower easel leg until the snap button engages in the fully extended
position. Repeat for all three legs. Please note that it is
possible to pull the lower leg off. If this happens, simply depress the
snap button and slide the leg back on.
SUPPORT
BRACE
BOARD
HOLDER
SNAP
BUTTON
3.0 To use your Triumph Display Easel at the 37" height, it may be
necessary to move the two board holder as follows:
3.1 Depress the snap button and remove the lower leg.
3.2 Move the board holder to the desired location and hold in place
while depressing the snap button and replacing the lower leg.
LOWER
LEG
4.0 Swing the two board holders into position. Gently rest your
presentation on the board holders.
Please note that your Triumph Display Easel can hold a maximum
of 25 pounds and is intended for display purposes only.
TRIUMPH DISPLAY EASEL
INSTRUCTION SHEET
MyBinding.com 5500 NE Moore Court Hillsboro, OR 97124 Toll Free: 1-800-944-4573 Local: 503-640-5920
Page 2 of 2 · End of manual
Quick start
- Choose a level location for the easel.
- Spread the three legs by snapping each leg away from the support braces.
- Press the snap button and slide each lower leg out until the button engages in the fully extended position.
- For the 37" height, remove the lower leg, move the board holder to the desired spot, and replace the leg while pressing the snap button.
- Swing the two board holders into position and gently rest your presentation on them.
Troubleshooting
| Problem | Likely cause | Fix (from the manual) |
|---|---|---|
| Lower leg comes off | The lower leg was pulled past its stop. | Depress the snap button and slide the leg back on. Page 2 |
Frequently asked questions
What heights does the Triumph Display Easel adjust to?
37" and 62" high. See page 2.
How much weight can the easel hold?
A maximum of 25 pounds; it is intended for display purposes only. See page 2.
How do I use it at the 37" height?
You may need to move the board holders: remove the lower leg, slide the holder to the new position and replace the leg. See page 2.
