Rev.B-5/01

Mounting Hardware (Not Included)

2. SCREW &_PLASTIC WALL PLUG (2) HOLLOW WALL ANCHOR (2) SCREW & CONICAL PLASTIC ANCHOR

May Be Acquired From Local Sources

FOR THE MOST SECURE MOUNTING OF THE VisuALL PC,USE #1O WOOD

Screws Installed Directly To Wooden Wall Studs.Whenwall

STUDS CAN NOT BE USED,WE RECOMMEND USING EXPANDABLE TYPE WALL ANCHORS (shown above).

DETERMINE THE DESIRED MOUNTING HEIGHT OF THE ViSuALL PC ANDSCRIBE ALEVEL LINE 1-1/2" DOWN FROM THIS LOCATION.

32-13/16" APART ALONG THE LINE.

TOMOUNT THE VisuALL PC USING #1O WOODSCREWS INTO STUDS...

2a.>DRILL(2） 3/32"HOLES AT THE MOUNTING HOLE LOCATIONS. C OF MOUNTING >INSTALL SCREWS，ALLOWING THE SCREW HEADS TO PROTRUDE 1/4" MAX. FROM THE WALL.

Hardware

>LIFT THE VisuALL PC HANGERS OVER THE SCREW HEADS.

Hanger Bracket

TO MOUNT THE VisuALL PC USING EXPANDABLE WALL ANCHORS...

2b.>DRILL(2） ANCHOR MOUNTING HOLES AT THE MOUNTING HOLE

REAR VIEW OF CABINET CORNER LOCATIONS, PER THE ANCHOR MANUFACTURES INSTRUCTIONS.

>INSTALL THE ANCHORS INTO THE HOLES PER THE ANCHOR MANUFACTURES INSTRUCTIONS.

Max.From The Wall

>LIFT VisuALL PC HANGERS OVER THE SCREW HEADS. VisuALL PC ghent.

Instruction Sheet Is-0004