Page 1 of 2
Text on page 2
Roam Mobile Whiteboard
Step 1: Placing the board upside down, locate the inside slots of the tray and insert legs.
Step 3: Use the included wrench to tighten the socket screw. The screw must be completely tightened for a secure leg connection.
Step 4: Repeat steps 1-3 for the outside legs.
Step 5: Once all the legs are securely attached, turn your board rightside up.
Step 2: Center the legs in the slot for a tight and secure fit.
MyBinding.com 5500 NE Moore Court Hillsboro, OR 97124 Toll Free: 1-800-944-4573 Local: 503-640-5920
IS-RM 6/17
Page 2 of 2 · End of manual
Quick start
- Place the board upside down and insert the legs into the inside slots of the tray.
- Center the legs in the slot for a tight, secure fit.
- Tighten the socket screw with the included wrench. It must be fully tightened for a secure leg connection.
- Repeat these steps for the outside legs.
- Once all legs are secure, turn the board right side up.
