Work Smarter, Not Harder.

The Graphtec FCX Series is the ultimate solution for prototyping and small production runs of rigid materials without the use of a cutting die.

Added offline (USB) operation enables users of all skill levels to easily process materials.

Advanced model with wide variety of tools and highest performance

Desktop model offering high performance and cutting speeds up to 750 mm/s

FCX2000 Series

FCX4000 Series

FC X2 0 0 0 -1 2 0 VC

F C X200 0 - 18 0VC

FC X4 0 0 0 -6 0 ES

www.graphteccorp.com

Precision cutting is achieved by enhancements to the rigidity of the moving mechanism that reduces deflection due to pressure during cutting. This has enabled new functions such as curved creasing / scoring lines. Graphtec flatbed cutting plotters meet the wide variety of applications used in prototyping and short production runs of packaging and industrial materials.

• 1 FCX2000 Series only. Cutting accuracy is not guaranteed.

Packaging

Packaging / POP

Cardboard (up to E flute :1.5 mm)*1

Sticker

Heavy paper

Sandblasting

Seal / Magnet sheet

Sandblast resist rubber

Enhanced functions for higher productivity and work efficiency

Supported Software

Offline operation supported by use of USB flash memory

Cutting Master 4 Graphtec Pro Studio Graphtec Pro Studio Plus

Offline operation using USB flash memory

Data management using barcode function with USB flash memory

Plot data is created from the design by using Cutting Master 4 or Graphtec Pro Studio, then the data is saved to USB flash memory. The plot data file can be selected from the USB by menu operation on the plotter, then cutting is performed. This simplified workflow enables users to operate without a computer.

In Print & Cut operation, the cutting data is automatically selected from USB flash memory by scanning the barcode printed on the media then performs contour cutting. This prevents the usage of incorrect data, and improves work efficiency.

P&C was performed by simply y reading the barcode!

I easily produced it!

J ust fried, ed, ed d, , piping p ip pip i ipi p in pin i ng n g ho h hot, ot, o t, cri crisp c ri r isp sp s spy. py. y. y y. . No t s top op O nce nc ce e ou out u t to eat. ut ea a t. Le t's go o to t o buy b uy u y an another n o the no th t he her er b be before e fo f o f re re th tha that hat th at a t runs ru u ns ou out ut !

Mo is t u re pe n et r at i on , b ea ut yess en c e ma s k .

Wi th th

to ma at to o o sauc ce e

Ti re d s ki nofv it a min de f ic ie nc y i s , in g lo s s y

b ea ut i f ul s ki n .

Ju st f r ie d, pi p in g ho t , c ri sp y. N ot st op Once ou ttoe at .

Le t' s go to b u y an ot he r be fo r e t ha t r un s ou t !

Mois t ure pene tr at ion , bea uty es se nce ma sk . Tir ed ski n of vit amin d ef icie ncy i s , in gl oss y bea uti ful s kin .

25 ml X 3 s he et

tomato sauc e

1 0 0 g(3 .5 oz )

2 5 ml X 3 sheet

Just st r f ed, ie d, e d , pi p pi i pi p i ng n i g h ho hot o t , , c cr r cr is spy. py. sp py y. N ot t st st o t op op O On nce ce c n ce o out ou ut ttoe ea a at t . . Let t ' 's go go toob buy uy an uy anot ano not ot t he h her er b bef be ef oor oret ha h hat at r uns un ns ou out ut t !

S hee t ma sk

Wi t h h Wi

tom omato o sauc auce e

Mo is tu repen e t ra ti o n , b e a u ty

s se n c e ma s k . e

T ire d s k in o f v i ta mi n d e fic ie n c y is , in g lo s sy

beau tif u l s k i n .

25 ml X 3s he et

Ju st frie d , p ip n g h o t, c ri sp y .

N t's o g Le st t p o o n u O b e a c y o n t th u o o r b e a e e t. fo r e t h at

Mo is tu re p en e tra tio n , T re i b a sk d ty e u in o fsen c it e m m a a in sk .

With to ma t o sa u c e

Pass the data via USB

5 ml X 3 sh e t

Pass the data via USB

Enhanced ARMS (Advanced Registration Mark Sensing system) for improved productivity of P&C applications

Four-point compensation - Precise cutting even of distorted printed graphics

This feature compensates for any skewing or distortion in printed graphics to ensure precise contour cutting.

Print Print

Data Data

Supported by standard crop marks -

special marks are not required for cutting

Cut Cut

Distorted Distorted print print graphics graphics

P&C is performed by printing the industry standard crop marks. Adding special marks with Graphtec software is not necessary. Operation is simple when crop mark information is entered within Cutting Master 4 software.

Cut Cut with with Graphtec Graphtec 4-point 4-point compensation compensation Cut Cut with with general general compensation compensation

Printing object

Printing object

Reverse side Cutting/Creasing using ARMS

ARMS Copy function

Cutting and creasing of printed graphics is possible even on the reverse side of the media. This prevents any scratches or damage to the printed graphic. On the FCX Series, operation is simple using Cutting Master 4 or Graphtec Pro Studio.

After data is sent the first time, it can be copied multiple times without a PC. In the FCX Series, the first four marks are scanned on the first sheet, and only the first mark in subsequent sheets. This improves productivity by shortening scan detection time.

Automatic ARMS Sensitivity Adjustment

Expanded cutting area

Marks are detectable when there is reasonable contrast against the background. For example, a white mark on a colored background.

This function expands the cutting area to include objects outside of the area enclosed by registration marks. Production efficiency is enhanced by reducing media waste.

Garment / Shoe Pattern

Cardboard / Compressed foam sheet

Traffic Signage

High-intensity reflective film

Window Display

Industrial Goods

Self-adhesive marking film

Highly-functional film

Table size and Media hold-down method

Improved application software

FCX2000 Series

Easy-to-use application software for creating original designs. It has enhanced functions such as auto-shapes, shading, and editing functions. It can also configure the cutting conditions and other settings on the plotter. Importing of EPS, Ai*, CMX*, and PDF* file types are supported. Graphics created with other popular design software can be imported into the software.

• It is available on the Graphtec Pro Studio.

For MAC OS user

FCX4000-50ES

FCX4000-60ES

Vacuum suction

Vacuum suction Electrostatic (*)

Cutting Master 4 is Graphtec plug-in software for Adobe Illustrator and CorelDRAW Graphics Suite. It sends cut data to the plotter and includes a variety of functions such as: preview, registration mark creation, tool conditions, cut job settings and more. Cutting Master 4 is easy to use and enables you to get the best performance from your plotter.

Graphics design software

FCX2000-120

FCX2000-60

plug-in software

FCX4000 Series

(*: Available in limited region.)

FCX2000-180

Holds media using external pump (blower). This option is most suitable for heavy or thicker materials.

Holds media by electrostatic that is generated by electrodes arranged inside the panel. This option is most suitable for cutting light weight materials.

In the FCX4000, assuming use in offices and small shop, The electrost atic adsorption system is adopted for both model, which makes less noise than other method such as vacuum suction system during the operation.

Further, By using the optional cling mat, it is also possible to cut media that can not be securely fi x ed by th e electrost atic adsorption system.

Graphtec Pro Studio Plus is the enhanced edition of Graphtec Pro Studio. It is optional so ftwa re with fu n c ti ons fo r i mprov i ng productivity and advanced design. Additional functions include: transformation of characters and graphics, automatic sequence number insertion, barcode creation, templates for rhinestone creation, nesting, directional change of cutting lines, changing cutting order, and more.

Limited Edition Software Graphtec Pro Studio Plus for Rhinestone Graphtec Pro Studio Plus for Auto Nesting

NEW LINEUP

Provided tools suitable for many applications

Creasing / scoring tool

PM-CT-002 is a new tool. This reduces peeling and cracking on the printed surface during the creasing/scoring process compared to our existing models.

• For FCX2000 Series

For curves on heavy paper (PM-CT-002)

For heavy paper (CP-001)

For heavy paper (CP-002)*

For cardboard (CP-003)*

Loupe for cutting blade

The Loupe is a standard accessory used to easily adjust extruded blade length with the PHP33 and PHP35 blade holders.

• Brand names and product names listed in this brochure are the trademarks or registered trademarks of their respective owners. • Items mentioned are subject to change without notice. For more information about product, please check the web site or contact your local representative.

For using equipment in correctly and safely

• Before using it, please read the user manual and then please use it properly in accordance with the description. • To avoid an occurrence of malfunction or an electric shock by leakage, please ensure ground connection and use it in specified power source.

503-10 Shinano-cho, Totsuka-ku, Yokohama 244-8503, Japan Tel : +81-45-825-6250 Fax : +81-45-825-6396 Email : webinfo@graphtec.co.jp

Website

http://www.graphteccorp.com

FCX2000-4000_JE10529_4P