Text on page 1
- Wilson Tuffy WT42ZC4E-N Navy Blue 42" High Tuffy Utility A/V Cart with Cabinet (3-Shelf Nickel Legs)
Page 1 of 5
Text on page 2
3 Shelf Tuffy Cart Instructions
NOTICE:
Leg lengths of leg E may be shorter than leg F
- - Rubber Mallet
Optional fluted legs for units with cabinet pack
Install optional cabinet pack / pullout shelf / locking drawer assembly after step 1
Page 2 of 5
Text on page 3
Tuffy Cart Cabinet Pack Instructions
Please consult your Tuffy cart base unit instructions before starting
IMPORTANT: Flip shelf B, and lock the 2 locking casters D before assembling the unit.
- - Rubber Mallet
Page 3 of 5
Text on page 4
WT-D Pullout Drawer Instructions
- - Phillips Screwdriver
With a Phillips Screwdriver, attach the drawer assembly to the top shelf with the 4 screws.
Page 4 of 5
Text on page 5
Electric Assembly Instructions
Number of outlets may vary.
(Plastic or Metal Mounting Surface)
Push screw C through electric outlet A. Make sure the electric outlet A and cord wrap B align with the mounting surface screw holes. Push screw C through cord wrap B and the mounting surface screw holes. Use wing nut D and screwdriver to fasten.
Page 5 of 5 · End of manual
Quick start
- Have a rubber mallet and a Phillips screwdriver ready.
- Assemble the 3-shelf base cart, noting that leg E may be shorter than leg F.
- Install the cabinet pack after step 1 of the base cart: flip shelf B and lock the 2 locking casters D before assembling.
- Attach the WT-D pullout drawer assembly to the top shelf with the 4 screws using a Phillips screwdriver.
- Mount the electrical outlet and cord wrap to the mounting surface with screw C and wing nut D.
Frequently asked questions
What tools do I need to assemble the cart?
A rubber mallet for the cart and cabinet pack, and a Phillips screwdriver for the pullout drawer (page 2-4).
Why is one set of legs shorter than the other?
That is expected: leg E may be shorter than leg F. Check which legs you are using for each shelf before assembling (page 2).
When should the cabinet pack be installed?
After step 1 of the base cart instructions. Flip shelf B and lock the 2 locking casters D first (page 2, page 3).
How do I attach the electrical outlet?
Push screw C through the outlet and the cord wrap, line both up with the screw holes on the mounting surface, push the screw through, and fasten with wing nut D using a screwdriver. The number of outlets may vary (page 5).
