„ OPERATION INSTRUCTIONS for

Portable Sealers KF-150PS, KF-150CST, KF-150CSTA

LIGHTWEIGHT AND VERSATILE sealer that can be used anywhere Model KF-150PS makes a perfect 6” long, strong seal on poly bags and other thermoplastic materials. Model KF-150CST is a 6” Teflon-coated direct heat sealer with a serrated jaw. Ideal for sealing cellophane, coated aluminum foil, Kraft paper, and other thicker materials.

KF-150PS

easy to operate

Simply place bag between the sealing bars, press down, and release.

directions for operation

1. Insert power plug into socket.

Step II. Allow the sealer to heat up approximately 5 minutes (warm-up time will vary with the thickness of the bag to be sealed). Choose either the low setting for a light material or a the high setting for thicker materials. The KF-150CSTA has 8 different temperature settings. We recommend starting at the lowest setting and gradually moving up as needed.

Step III. After a suitable temperature has been reached, put the bag edge between the heated sealing bars and press down for 3 seconds. If the seal weld holds, continue this way.

• If the welding appears to damage the bag, apply pressure on the sealing bar for less than 3 seconds. If the welding appears incomplete, apply pressure for more than 3 seconds.

KF-150CST

parts list

notes

• Rubber Foot (not shown)

Pin for Teflon Cloth

Heat Element Fixed Plate

• Clamp & Pedal Set #16-21
• Never touch the heated bars of the unit
• Never allow a liquid to come in contact with the unit
• Never shock or drop the unit
• Always have the heating element covered with Teflon protection for the KF-150PS model
• Keep the heating element and silicone of the KF- 150PS clean
• Always unplug the unit when not n use.
• Always allow the unit to cool down before putting away