Keencut Evolution-E2 Parts List, page 1
Text on page 1

Evolution E2 Spare parts drawing key

KE2#-001 RH

KE21-010 PLUS BLADE HOLDERS

KE2#-001 LH

KE2#-001 EXTRUSIONS

MyBinding.com 5500 NE Moore Court Hillsboro, OR 97124 Toll Free: 1-800-944-4573 Local: 503-640-5920

Page 1 of 9

Keencut Evolution-E2 Parts List, page 2
Text on page 2

Evolution E2 Assembly KE2#-001 parts (LH only)

SEE SEPERATE

DRAWING FOR MORE EXTRUSION DETAIL

x4

ITEM 10 SUPPLIED WITH

4x ITEM 21 FITTED

EVOTCS

SILYT

SILYR

Lift and Hold Lever

Lift and Hold Wheel

Lift and Hold Leg

Page 2 of 9

Keencut Evolution-E2 Parts List, page 3
Text on page 3

Evolution E2 Assembly KE2#-001 parts (RH only)

SEE SEPERATE

DRAWING FOR MORE EXTRUSION DETAIL

ITEM 10 SUPPLIED

WITH 4x ITEM 21 FITTED

EVOTCS

SILYT

SILYR

Lift and Hold Lever

Lift and Hold Wheel

Lift and Hold Leg

Page 3 of 9

Keencut Evolution-E2 Parts List, page 4
Text on page 4

Evolution E2 Assembly KE2#-001 parts

EVOTCS

SILYT

SILYR

# KEY

SILYT

2 STRIPS OF 'T' SHAPED YELLOW SILICON CORD FITS IN THE UNDERSIDE OF THE CUTTER BAR. SUPPLIED IN 10m LENGTHS.

SILYR

1 STRIP OF ROUND YELLOW SILICON CORD FITS IN THE BASE PLATE. SUPPLIED IN 10m LENGTHS.

EVOTCS

CUTTING STRIP SUPPLIED IN BOXES OF 2x 4m STRIPS.

KE22-*** KE23-*** KE24-*** KE25-*** KE26-***

FOR 1.6m EVOLUTION E2 FOR 2.1m EVOLUTION E2 FOR 2.6m EVOLUTION E2 FOR 3.1m EVOLUTION E2 FOR 3.6m EVOLUTION E2

Page 4 of 9

Keencut Evolution-E2 Parts List, page 5
Text on page 5

Bracket Assembly

KE11-002

No. of Base Brackets

Page 5 of 9

Keencut Evolution-E2 Parts List, page 6
Text on page 6

Evo II Double Slideblock Assembly

KE21-010

DESIGN NOTE:

ITEM 10 WAS ADDED ON 7/9/2016 Ser. S7412 IF ITEM 17 IS REPLACED ON OLDER MACHINES THEN ITEM 10 SHOULD ALSO BE SUPPLIED AND THE MACHINE UPDATED.

ITEMS 8(x4),12(x4) & 14(x8) ARE SUPPLIED TOGETHER AS A FULL SET

Page 6 of 9

Keencut Evolution-E2 Parts List, page 7
Text on page 7

Graphik Blade Holder Assembly KE21-011 (Sales Code VABHG)

PARTS 1 TO 5 ONLY

AVAILABLE ASSEMBLED TOGETHER.

Page 7 of 9

Keencut Evolution-E2 Parts List, page 8
Text on page 8

Textile Tool Holder Assembly KE21-012 (Sales Code VABHC)

Rotary Blade Clamp Plate

Supplied with 6 & 8

Supplied with 5 & 8

Square End Flat Sleeve

Supplied with 5 & 6

PARTS 5, 6 & 8

SUPPLIED TOGETHER

PARTS 1 & 10

SUPPLIED TOGETHER

Page 8 of 9

Keencut Evolution-E2 Parts List, page 9
Text on page 9

Medium Duty Blade Holder Assy L-R KE21-013 (Sales Code VABHML)

PARTS 1 & 2

SUPPLIED TOGETHER

Supplied with 2 or 8

MD Holder Blade Depth Label

Medium Duty Blade Holder L-R

PARTS 1 & 9

SUPPLIED TOGETHER

PARTS 5 & 6

SUPPLIED TOGETHER

Page 9 of 9 · End of manual

Quick start

  1. Use the drawing key on page 1 to find the assembly: extrusions (KE2#-001 LH/RH), double slideblock (KE21-010) or blade holders.
  2. Open the matching assembly drawing to identify the item number.
  3. Check the notes for parts supplied together as a set.
  4. For cutting strip, pick the code for your machine length (KE22 for 1.6m up to KE26 for 3.6m).

Frequently asked questions

What is the part number for the Evolution E2 double slideblock?

The Evo II Double Slideblock Assembly is KE21-010. See page 6.

What are SILYT and SILYR?

SILYT is the T-shaped yellow silicone cord (2 strips) that fits under the cutter bar; SILYR is the round yellow silicone cord that fits in the base plate. Both come in 10m lengths. See page 4.

What is the Evolution E2 cutting strip part number?

EVOTCS, supplied in boxes of 2 x 4m strips. See page 4.

What are the blade holder part numbers?

Graphik Blade Holder KE21-011 (sales code VABHG), Textile Tool Holder KE21-012 (VABHC) and Medium Duty Blade Holder L-R KE21-013 (VABHML). See pages 7 to 9.

Do older machines need anything extra when replacing slideblock item 17?

Yes. Item 10 was added on 7/9/2016 (serial S7412); if item 17 is replaced on an older machine, item 10 should also be supplied and the machine updated. See page 6.