Keencut Ultimat Gold Mat Cutter Parts List, page 1
Text on page 1

CA30/006 CA75/093

S TA RTOFCUT

CA75/009 CA30/191

Complete Cutting Head Assembly KU11/017

CUTTER HEAD

KU11/105 KU11/131 CA30/013

CA10/250 CA30/139 CA75/006 CA30/003 CA25/001 CA30/178 CA75/005 CA30/160

CA30/258 KU11/137

CA30/133 CA30/122

CA10/061 CA30/122

CA75/115 x2 (Linear Bearings)

CA30/200 x4 (Screws for Bearings)

KU11/104 CA30/078 CA25/047 KU11/151

MyBinding.com 5500 NE Moore Court Hillsboro, OR 97124 Toll Free: 1-800-944-4573 Local: 503-640-5920

ULTIMAT G O LD

S PA R E PA RTREFERENCE

MARGIN GUIDE

SLIDEWAY

MARGIN GUIDE

TOP END PLATE

BASE

LIFT & HOLD

START OF CUT- KU11/013

CUTTER HEAD- KU11/017

CUTTER BAR

BOTTOM END

PLATE

ULTIMAT G O LD

Complete Start of Cut Assembly KU11/013

MEASURING ARM

Page 1 of 2

Keencut Ultimat Gold Mat Cutter Parts List, page 2
Text on page 2

ULTIMAT G O LD

CA10/196 CA25/108 CA30/007

MARGINSLIDE WAY

CA30/006 CA75/093

KU11/124 (UG 40”) KU12/124 (UG 48”) KU13/124 (UG 62”)

N.B. Fixings blocks for Top End Plate are of type KU01/132 and not KU01/153 .

MARGIN GUIDE

CA25/060 KU01/124

KU01/121 (UG 40”) KU02/121 (UG 48” + UG 62”)

CA75/060 at other end

TOPENDPL AT E

KU01/107 (UG 40”) KU02/107 (UG 48”) KU03/107 (UG 62”)

KU11/108 (KU11/109) at other end

KU11/130 (UG 40”) KU12/130 (UG 48”) KU13/130 (UG 62”)

CA30/006 CA75/093

KU11/106 (UG 40”) KU12/106 (UG 48”) KU13/106 (UG 62”)

CUTTER BAR

LIFT & HOLD

Below shows arrangement of Spring Washers - CA30/211 on CA30/101

MEASURING ARM

CA30/041 CA30/129 CA30/158 CA75/023

BOTTOMENDPL AT E

CA30/029 2( x2 )

Page 2 of 2 · End of manual

Quick start

  1. Find the assembly on the overview drawing (cutter head, start of cut, margin guide, end plates, cutter bar, Lift & Hold, measuring arm).
  2. Read the part code from the detailed drawing.
  3. Where codes differ by machine size, pick the one for your UG 40", UG 48" or UG 62".

Frequently asked questions

What is the part number for the complete Ultimat Gold cutting head?

KU11/017. See page 1.

What is the start of cut assembly part number?

The complete Start of Cut Assembly is KU11/013. See page 1.

What linear bearings does the Ultimat Gold cutter head use?

CA75/115 (x2), fixed with CA30/200 screws (x4). See page 1.

Which fixing blocks are used on the top end plate?

Type KU01/132, not KU01/153. See page 2.