

Page 1 of 5

Text on page 2
INSTRUCTION MANUAL / MANUEL D’UTILISATION
FoamWerks CUTTING BOARD
MODEL W3002
INSTRUCTIONS MANUAL
32in (81cm) capacity cutting board with squaring bar and
20 in (51 cm) measuring bar with stop.
Support de découpe d’une capacité de 32in (81cm) avec barre d’équerrage
et règle-guide de 20 in (51cm) avec butée
Can be used with: WC2001 FoamWerks V-Groove Cutter WC6001 FoamWerks Straight Cutter WC6010 FoamWerks Straight/Bevel Cutter
ID Number (on bottom of board)
Date (on bottom of board)
J1810-DN 05-17
Page 2 of 5

Text on page 3
Congratulations on your purchase of the
FoamWerks Cutting Board.
Félicitations pour l’achat de votre support
de découpe FoamWerks.
This versatile and dependable tool will prove to be a useful device for those seeking professional results from a low priced, easy to use foamboard cutting board. This instruction manual is written to aquaint you thoroughly with this product. Please take some time to familiarize yourself with it before cutting. You will find that the time taken will be well worth it and you will be cutting quality foamboard in no time.
Cet outil polyvalent et sûr s’avèrera être un outil utile à ceux qui recherchent des résultats professionnels avec un support de découpe bon marché, facile d’utilisation. Ce manuel d’instructions est conçu pour vous familiariser avec votre article. Prenez le temps de le lire avant de découper. Vous vous rendrez compte que le temps passé en vaut la peine et en un rien de temps vous effectuerez des découpes de qualité de cartons mousse.
CHECK OF CONTENTS:
32” capacity base board, Straight Cut Measuring Bar, Measuring Bar Stop, and Squaring bars.
Vérification du contenu: Support de découpe de 32’’, règle-guide droite, butée de règle-guide et barres d’équerrage.
IDENTIFICATION OF MACHINE COMPONENTS / Identification des pièces :
Cutting Board / Support de découpe
Guide Rail Used to guide cutting heads while in use
Rail de guidage Utilisé pour guider la tête de découpe lors de son utilisation
Removable Measuring Bar 20in (51cm) removeable scale & stop used to cut matboard to size
Règle-guide amovible Règle amovible de 20in (51cm) et sa butée pour couper des cartons mousse à la dimension souhaitée
Cutting Board Vinyl covered base board of machine
Support de découpe Base en revêtement vinyle
Squaring Bar Used to hold the foamboard 90º square to the guiderail
Barre d’équerrage Sert à maintenir le carton mousse à 90° par rapport au rail de guidage
Warranty
Logan Graphic Products, Inc. (“Logan”) warrants the W3002 FW Cutting Board to be free from defects in parts and workmanship for a period of two years from the date of original purchase. Logan warrants that it will either repair or replace, in its sole discretion, any necessary replacement parts found to be defective. Should the product need to be returned to Logan for repair or replacement parts, authorization for any return must come from Logan in writing. Costs of returning the product to Logan, including insurances, shall be borne by the purchaser. Logan shall not be liable for any damages or losses, incidental or consequential, direct or indirect, arising from the use of this product. This warranty extends only to the original purchaser and is not assignable or transferable. This warranty is in lieu of all other warranties, expressed or implied. Be advised that any Logan products purchased as “new” from an unauthorized dealer, such as an online auction site or similar, may be void of their warranty. Logan Graphic Products, Inc. 1100 Brown Street Wauconda, IL 60084 800/331-6232 847/526-5515
Page 3 of 5

Text on page 4
Align pins in bottom of measuring bar with holes in board and press to install (Fig. 1).
Align squaring bars above slots and press into board slots. Slide longer bar under Guiderail to end of slot (Fig. 1).
Set measuring bar stop to dimension of cut.
Slide foamboard under guiderail, against squaring bars and up to measuring bar stop (Fig. 2).
NOTE: Foamboard underlayment not needed when using cutting board.
Cutting with Model WC 2001 V Cutter
Either offset measuring bar scale by subtracting 1 1/4” or mark foamboard where you want to cut.
Align V cutter over mark and cut (Fig. 3).
Insérer la règle-guide dans les trous du support de découpe et appuyer pour l’installer (Fig. 1).
Insérer les barres d’équerrage dans les rainures et appuyer. Faire glisser la barre la plus longue sous le rail de guidage jusqu’au bout de la rainure (Fig. 1).
Mesurer le carton mousse
Placer la butée de la règle à la dimension désirée.
Faire glisser le carton mousse sous le rail de guidage, contre les barres d’équerrage et jusqu’à la butée de la règle-guide (Fig. 2).
REMARQUE : Il n’est pas nécessaire de placer une chute sous le carton mousse lorsqu’on utilise le support de découpe.
Couper avec le cutter V Modèle WC 2001 V
Positionner la rainure du bord du cutter sur le rebord du rail de guidage.
En le décalant d’1 1/4’’ de la règle-guide ou bien en traçant le trait de découpe sur le carton mousse. Faire coïncider la flèche du cutter V avec le trait et découper (Fig. 3).
Page 4 of 5

Text on page 5
Cutting with Model WC 6001 Straight Cutter
Align slot on cutter edge over lip of guiderail (Fig. 4).
Cutting with Model WC 6010 Straight/Bevel Cutter
Align cutter up against guiderail (Fig. 5).
Couper avec le cutter droit Modèle WC 6001
Positionner la rainure du bord du cutter sur le rebord du rail de guidage (Fig. 4).
Couper avec le cutter droit /biseau Modèle WC 6010
Placer le cutter le long du rail de guidage (Fig. 5).
The use of this tool eliminates the need for using scrap foamboard underlayment under the foamboard being cut.
L’utilisation de cet outil rend inutile l’emploi d’une chute de carton mousse sous le carton mousse à découper.
Page 5 of 5 ยท End of manual
Quick start
- Check the contents: you should have the 32" capacity base board, the straight cut measuring bar, the measuring bar stop and the squaring bars.
- Fit the measuring bar: align the pins in the bottom of the measuring bar with the holes in the board and press to install.
- Fit the squaring bars: align them above the slots and press them into the board slots. Slide the longer bar under the guiderail to the end of its slot.
- Set the size: set the measuring bar stop to the dimension of the cut.
- Load the foamboard: slide it under the guiderail, against the squaring bars and up to the measuring bar stop. No foamboard underlayment is needed.
- Cut with a V cutter (WC2001): offset the measuring bar scale by subtracting 1 1/4" or mark the foamboard, then align the V cutter over the mark and cut.
- Cut with a straight cutter: for the WC6001, align the slot on the cutter edge over the lip of the guiderail. For the WC6010 Straight/Bevel, align the cutter up against the guiderail.
Troubleshooting
| Problem | Likely cause | Fix (from the manual) |
|---|---|---|
| Measuring bar will not seat on the board | The pins are not lined up with the holes | Align the pins in the bottom of the measuring bar with the holes in the board and press to install. Page 4 |
| Foamboard is not cut square | The foamboard is not against the squaring bars | Slide the foamboard under the guiderail, against the squaring bars and up to the measuring bar stop. Page 4 |
| V cutter cuts in the wrong place | The measuring bar scale was not offset for the V cutter | Subtract 1 1/4" from the measuring bar scale, or mark the foamboard where you want to cut and align the V cutter over the mark. Page 4 |
| Straight cutter wanders from the guiderail | The cutter slot is not seated on the guiderail | Align the slot on the WC6001 cutter edge over the lip of the guiderail. Page 5 |
| Unsure whether scrap foamboard is needed under the cut | Underlayment is not needed with this cutting board | Cut directly on the board without foamboard underlayment. Page 4 |
| Warranty claim is refused | The board was bought as new from an unauthorized dealer, such as an online auction site, which may void the warranty | Contact Logan at 800/331-6232. Any return needs written authorization from Logan. Page 3 |
Frequently asked questions
What size foamboard can the W3002 cut?
It is a 32 in (81 cm) capacity cutting board with a squaring bar and a 20 in (51 cm) measuring bar with stop. See page 2.
Which cutters can I use with it?
The WC2001 FoamWerks V-Groove Cutter, the WC6001 FoamWerks Straight Cutter and the WC6010 FoamWerks Straight/Bevel Cutter. See page 2.
What does the squaring bar do?
It holds the foamboard 90 degrees square to the guiderail. See page 3.
Do I need foamboard underneath when cutting?
No. Using this tool removes the need for scrap foamboard underlayment. See page 4, page 5.
How long is the warranty?
Two years from the date of original purchase, for the original purchaser only. See page 3.
