Page 1 of 2
Text on page 2
LUXDA
INNOVATIVE WORKSPACE PRODUCT SOLUTIONS
Lay top shelf (with 4 leg posts only), ribbed side up on a smooth surface. Begin cart assembly by pushing 1 set of 4 legs onto leg posts.
Position second shelf over the 4 legs and insert leg posts into legs. Using a rubber mallet, firmly hammer shelf into legs until all four legs are seated (flush) against the surfaces of both shelves.
Add bottom shelf with caster sockets.
Push the four casters firmly into the holes in each corner of the bottom shelf (for big wheel models insert two 4" casters on nar row end of cart and follow big wheel instruc tions on next page).. Important: casters must be fully seated. Tap firmly with rubber mallet to properly seat casters. Turn your Endura Linen Cart right side up, it is now ready for use.
Place the next set of legs onto leg posts of shelf with handle and firmly hammer until properly seated. Repeat for all middle shelves.
Call Us at
1-800-944-4573 for inquiries
Page 2 of 2 · End of manual
Quick start
- Lay the top shelf (the one with 4 leg posts only) ribbed side up on a smooth surface and push 1 set of 4 legs onto the leg posts.
- Position the next shelf over the legs, insert its leg posts and hammer it with a rubber mallet until all four legs sit flush against both shelves.
- Repeat with the next set of legs for each middle shelf.
- Add the bottom shelf with the caster sockets.
- Push the four casters firmly into the corner holes and tap with a rubber mallet until fully seated, then turn the cart right side up.
Frequently asked questions
What tool do I need to assemble the cart?
A rubber mallet, used to seat the shelves onto the legs and to seat the casters (page 2).
Which shelf goes on top?
The shelf with 4 leg posts only is the top shelf. Start by laying it ribbed side up (page 2).
How do I know the casters are installed correctly?
The casters must be fully seated in the bottom-shelf corner holes. Tap them firmly with a rubber mallet (page 2).
How are casters installed on big wheel models?
Insert two 4" casters on the narrow end of the cart and follow the separate big wheel instructions (page 2).
