DIVWT 2 Clamp Wall Top Divider Panel Assembly Guide

Part List

Optional Permanent Mount Refer to the Back Page

Tools Needed:

Allen Wrench

Attach B to A with Screws C

Attach D with Screw E

Install F into Assembled Clamps Tighten Clamps

Install Divider Panel onto Wall Tighten Clamps to Wall

DIVWT 2 Clamp Wall Top Divider Panel Assembly Guide Optional Permanent Mount

Tools Needed:

Allen Wrench

Screw Driver Pencil

Attach D to B with Screw E

Install F into Assembled Clamps. Tighten Clamps.

Call Us at

for Orders or Inquiries

With Assistance - Place the Panel Assembly on the Wall and Outline the Clamps with a Pencil.

Remove and Disassemble the Panel Assembly. Place Part B on the Wall in the Outline Location and Secure with Screws G.

Reassemble the Clamp. Install F into Assembled Clamps. Tighten Clamps.