Page 1 of 4
Text on page 2
3 Shelf LP + LE Cart Instructions
NOTICE:
Leg lengths of leg E may be shorter than leg F
- - Rubber Mallet
Install optional cabinet pack / pullout shelf / electrical assembly after step 1
Page 2 of 4
Text on page 3
Pullout Keyboard Shelf Instructions
FR x1
- - Phillips Screwdriver
FL x1
NOTICE:
Size and style of the plastic ribbed shelf may vary by model number.
(Ha
Take the top shelf of your plastic cart and lay it flat. Collect parts: FL, FR & A. Align FR & FL to the outer holes at the top of the shelf. Take screw A and fasten with a screwdriver, do not tighten fully until keyboard is attached.
Collect parts: H. Align the pullout shelf H runner so that the runner snaps into place into the FL & FR brackets. Pull the shelf out to make sure it is fully seated. Tighten screws A. Pullout keyboard shelf assembly is now complete.
Page 3 of 4
Text on page 4
- - Philips Screwdriver
LP + LE Electrical Assembly Instructions
Attach electric outlet F to top shelf A, secure with L bracket G and cable lock J. Loop outlet cable F through cable lock J and the inserts on shelf A. Screw L bracket G and cable lock J onto top shelf A with screw H and a philips screwdriver.
for Orders or Inquiries
Page 4 of 4 · End of manual
Quick start
- Lay the top shelf of the cart flat and have a Phillips screwdriver ready.
- Align brackets FR and FL to the outer holes at the top of the shelf and fasten with screws A, without fully tightening.
- Snap the runners of pullout shelf H into the FL and FR brackets, pull the shelf out to make sure it is fully seated, then tighten screws A.
- Attach electric outlet F to top shelf A, loop the outlet cable through cable lock J and the shelf inserts, and screw L bracket G and cable lock J on with screw H.
Frequently asked questions
What tool do I need to assemble it?
A Phillips screwdriver (page 3).
How do I install the pullout keyboard shelf?
Fasten brackets FR and FL to the outer holes of the top shelf with screws A (leave loose), snap the shelf H runners into the brackets, pull it out to seat it, then tighten the screws (page 3).
How is the electrical outlet mounted?
Outlet F attaches to top shelf A with L bracket G and cable lock J, secured with screw H. The outlet cable loops through the cable lock and the shelf inserts (page 4).
