Luxor STANDE-60-BK/BO Standing Desk Instruction Manual, page 1
Text on page 1

Luxor 60" 3-Stage Dual-Motor Electric Black Oak Stand Up Desk- STANDE-60-BK/BO

Page 1 of 8

Luxor STANDE-60-BK/BO Standing Desk Instruction Manual, page 2
Text on page 2

Height range: 640-1290 mm / 25.2 x 50.8 in Weight capacity: 120 kg / 256 lbs Features: Electric, triple stage, dual motor, T-frame configuration, two memory position handset + home, expandable frame Notes: Desktop sold separately, images may vary from purchased desk

Electric / Triple Stage / Dual Motor

Page 2 of 8

Luxor STANDE-60-BK/BO Standing Desk Instruction Manual, page 3
Text on page 3

HANDSET

MANUAL RESET:

Check to make sure all cables are well connected, retry handset. If issue continues... Disconnect power cable for 3 minutes, reconnect power cable, retry handset.

Auto saved memory position (will go to 720mm)

Second memory position (press and hold 5 seconds to save)

First memory position (press and hold 5 seconds to save)

Display screen (640mm - 1290mm)

Down key (push and hold)

Up key (push and hold)

CAUTION

Keep children away from desk - especially handset, controller / powerbrick, legs, or cables. There is a risk of electric shock or serious injury.

Do not open any componements - especially handset, controller / powerbrick, legs or cables. There is a risk of electric shock or serious injury.

Close supervision is necessary when children, elderly, or persons with disabilities are in close proximity.

Keep all electrical components away from liquids or wet areas.

Do not sit or stand on desk. Do not crawl or lie under desk.

Do not place any object taller than 20” (when using glides) 23” (when using casters) under desk.

Never operate desk if cords / plug are wet or damaged.

Make sure there are no obstacles in the path of the desk’s motion.

Make sure all cords are appropriate length to accomodate desk’s motion.

Never exceed noted weight capacity.

Ensure all hardware are properly tightened.

If component needs to be replaced, remove power cord first.

In the event of a power outage or accidental removal of power cord, a manual reset may be necessary. See MANUAL RESET.

USE & LIABILITY

Read all instructions before using desk. Keep instructions for reference. Manufacturer does not accept warranty claims or liability claims for damages caused by improper use or handling.

Page 3 of 8

Luxor STANDE-60-BK/BO Standing Desk Instruction Manual, page 4
Text on page 4

PARTS INCLUDED

NOT TO SCALE

A QTY: 2

B QTY: 2

C QTY: 1

D QTY: 2

E QTY: 2

F QTY: 1

G QTY: 1*

H QTY: 2

Desktop sold separately

J QTY: 1

HARDWARE INCLUDED

1 QTY: 12 M8-10

2 QTY: 8 M8-20

3 QTY: 4 M6-10

TOOLS INCLUDED

NOT TO SCALE

4 QTY: 8 M6-12

5 QTY: 2 ST3.5-13

TOOLS REQUIRED

OR

Page 4 of 8

Luxor STANDE-60-BK/BO Standing Desk Instruction Manual, page 5

Page 5 of 8

Luxor STANDE-60-BK/BO Standing Desk Instruction Manual, page 6

Page 6 of 8

Luxor STANDE-60-BK/BO Standing Desk Instruction Manual, page 7

Page 7 of 8

Luxor STANDE-60-BK/BO Standing Desk Instruction Manual, page 8

Page 8 of 8 · End of manual

Quick start

  1. Check the parts (A-J) and hardware (M8-10, M8-20, M6-10, M6-12 and ST3.5-13 screws) against the parts list on page 4. The desktop is sold separately.
  2. Make sure all cables are connected and all cords are long enough for the desk's full range of motion.
  3. Press and hold the up or down key to move the desk; the display shows the height from 640 mm to 1290 mm.
  4. To save a memory position, move the desk to the height you want, then press and hold memory key 1 or 2 for 5 seconds.
  5. Press the home key to return to the auto-saved position of 720 mm.

Troubleshooting

ProblemLikely causeFix (from the manual)
Handset does not respondLoose cable connectionCheck that all cables are well connected, then retry the handset. Page 3
Handset still does not work after checking cables, or the desk stopped working after a power outagePower outage or the power cord was accidentally removedDo a manual reset: disconnect the power cable for 3 minutes, reconnect it, and retry the handset. Page 3

Frequently asked questions

What is the height range of this desk?

640-1290 mm, or 25.2" to 50.8" (page 2).

How much weight can the desk hold?

The weight capacity is 120 kg / 256 lbs (page 2).

How do I save a memory height?

Press and hold memory key 1 or 2 for 5 seconds to save the current height. The home position is auto-saved at 720 mm (page 3).

How do I reset the desk?

Check that all cables are connected and retry. If it still does not work, unplug the power cable for 3 minutes, plug it back in and retry the handset (page 3).

How tall an object can go under the desk?

Nothing taller than 20" when using glides, or 23" when using casters (page 3).