

Page 1 of 3

Text on page 2
Do not use solvents such as alcohol, benzene or thinner to remove dirts, as they may mar the finish of the case. It is advised to use wet damp cloth only.
BATTERY OPERATED
LETTER OPENER
MODEL 1624
ALCOHOL, BENZERE, THINNER
FEATURES
Cutting Width Power source
: 2.5mm : 4 pcs 1.5 volts AA size or UM3 dry batteries. Alkaline battery is recommended. Power Consumption: About 3,000 opening cycles when alkaline battery is used. (Performance varies according to usage of envelope and different kinds of battery.)
INSTRUCTION MANUAL
Page 2 of 3

Text on page 3
- HOW TO USE
- CAUTIONS
BATTERY INSTALLATION
Slide the lid of battery compartment in direction shown in fig. 1. Insert four 1.5V AA size or UM3 batteries in correct polarities as illustrated inside the compartment.
Do not cut thick paper, cardboard, cloth, metals, etc. which will cause a machine trouble or even injure the cutters.
Do not put your finger into the cutter part. It is dangerous to open the case and touch the mechanism.
When the set is not used for a long period or the batteries already used-up, remove batteries to avoid damage from battery leakage.
TO OPEN AN ENVELOPE
Move the contents of envelope to the side of notopening. Insert the desired opening end of envelope alongside the guide and slide as per picture shown in fig. 2. Machine will work automatically and the envelope will be cut and opened. Never insert from halfway of envelope to the fuide, otherwise machine will not operate.
Page 3 of 3 · End of manual
Quick start
- Slide the battery lid open and insert four 1.5V AA (UM3) batteries; alkaline batteries are recommended.
- Move the envelope contents away from the side to be opened.
- Insert the opening end of the envelope alongside the guide and slide it through; the opener cuts automatically.
- Do not start from the middle of the envelope, or the machine will not operate.
Troubleshooting
| Problem | Likely cause | Fix (from the manual) |
|---|---|---|
| Case finish is dirty or dull | Solvents such as alcohol, benzene or thinner can mar the finish of the case. | Remove dirt with a damp cloth only. Do not use solvents. Page 2 |
| Machine trouble or damaged cutters | Thick paper, cardboard, cloth, metals or similar material was fed in. | Do not cut these materials. Use the opener only on envelopes. Page 3 |
| Machine will not operate when an envelope is inserted | The envelope was inserted from halfway along its length instead of from the end. | Insert the opening end of the envelope alongside the guide and slide it through. Never insert from halfway. Page 3 |
| Battery leakage damage | Used-up batteries or batteries left in during long storage can leak. | Remove the batteries when the opener is not used for a long period or when the batteries are used up. Page 3 |
| Risk of injury at the cutter | Fingers placed in the cutter part, or the case opened. | Do not put your fingers into the cutter part. Do not open the case and touch the mechanism. Page 3 |
Frequently asked questions
How wide a strip does the 1624 cut?
The cutting width is 2.5 mm. See page 2.
How many envelopes will a set of batteries open?
About 3,000 opening cycles with alkaline batteries; this varies with the envelopes and battery type. See page 2.
What batteries does it take?
Four 1.5V AA size or UM3 dry batteries. Alkaline is recommended. See page 2.
Can I clean it with alcohol?
No. Alcohol, benzene or thinner may mar the case; use a damp cloth only. See page 2.
