Martin Yale BM101 Operating Instructions, page 1

Page 1 of 3

Martin Yale BM101 Operating Instructions, page 2
Text on page 2

Booklet Making In 4 Easy Steps

Step 1

Step 2

Center the paper on the grid

Model BM101 - Booklet Maker

Bring the lever down to activate both staplers

Thank you for purchasing the BM101 Booklet Maker. This product will prove to be a great value and allow you to effi ciently produce booklets of up to 40 pages (10 sheets) inside your choice of cover material for many years.

Step 4

Step 3

Reverse the lever to activate folder

Remove fi nished booklet

Replacement Parts:

Item# M-S025052 M-S033073

Description 65T double-sided belt Illuminated ON/OFF switch Martin Yale Roller Cleaner

Trouble Shooting / Technical Assistance

Specifi cations:

Call 1-800-225-5644

Dimension of Unit: 15 3 / 4 ” x 19 3 / 4 ” x 5 1 / 2 ” Weight of Unit: 34 lbs. Voltage: 120V Paper Capacity: 10 sheets of 20 lb bond with cover Paper Sizes: 8 1 / 2 ” x 11”, 8 1 / 2 ” x 14”, 11” x 17”, A3, A4, B4 and B5 Staplers (2): 4 position - used standard staples

Contact Information:

251 Wedcor Avenue Wabash, IN. 46992 www.martinyale.com info@martinyale.com

WARNING! Never connect power to the model BM101 booklet maker until you are ready to set up and operate the machine. This machine contains moving parts. During setup, operation, and maintenance; keep hands, hair, loose clothing, and jewelry away from all moving parts. Serious bodily injury could result. Service or disassembly of the unit should only be performed by qualifi ed personnel with the power disconnected and locked out.

Page 2 of 3

Martin Yale BM101 Operating Instructions, page 3
Text on page 3

PREPARATION:

After unpacking your NEW Booklet Maker, select a fl at and stable surface of a comfortable working height and position the unit near a power outlet. Securely insert power cord into the 120V outlet.

LOADING THE STAPLERS:

Firmly pull the stapler bottom away from it’s main housing (see Fig. 1) and swing open until the spring loaded slide fully retracts. Insert standard staples into the stapler (see Fig. 2) and close the unit. Use caution and keep fi ngers away from end of stapler when closing to prevent being punctured by staples.

POSITIONING OF THE STAPLERS:

The chart located on top of the unit to the right of center (see Fig. 3) will designate the positions of the staplers for that specifi c paper size.

POWER TO THE BOOKLET MAKER:

The power switch is located at the top left corner of your unit. Press “ON” to supply power to the unit (see Fig. 7). The switch will illuminate when power is on. If switch does not illuminate check the power cord to the outlet. Turn the unit “OFF” when not in use.

STAPLING THE BOOKLET:

Place your hand on the top handle bar and midpoint between the stapler heads (see Fig. 8). Press downward fi rmly until the staples have been fully inserted through the paper stack.

FOLDING THE BOOKLET:

After the sheets have been stapled, rotate the handle and fi rmly press downward. Your booklet will be folded and will be ejected (see Fig. 9). Releasing the handle and/or returning it to the stapling position will stop the folding motor.

Grasp the top of the stapler housing (see Fig. 4) and position the stapler over the correct letter designation until you feel the stapler click into position on the locator rod.

PAPER POSITIONS:

Insert your collated sheets into the unit (see Fig. 5) with your cover sheet on top. Place the stack against the frame rail and both paper guides.

Adjust the paper guides until fi rmly against each side of the paper stack (see Fig. 6). The stack will automatically be positioned due to the synchronized self-centering paper guides.

MAINTENANCE:

With extended usage, the folding rollers may become contaminated with inks and/or paper dust and will require cleaning.

Before performing any maintenance, turn the power switch to the “OFF” position, remove the (4) screws from the top of the roller cover (see Fig. 10) and remove cover.

For cleaning ink contamination, the Martin Yale Roller Cleaner is recommended. Spray a clean cloth liberally with the cleaner (see Fig. 11) and clean the roller surface using fi rm strokes (see Fig. 12). Replace roller cover before use.

Page 3 of 3 · End of manual

Quick start

  1. Place the unit on a flat, stable surface near a 120V outlet and plug it in.
  2. Load standard staples: pull the stapler bottom away from the housing, insert staples and close.
  3. Slide each stapler to the letter shown for your paper size on the chart on top of the unit until it clicks onto the locator rod.
  4. Insert collated sheets with the cover on top, against the frame rail, and bring the self-centering paper guides against the stack.
  5. Press the illuminated power switch ON.
  6. Press the handle bar down firmly to staple, then rotate the handle and press down to fold and eject the booklet.

Troubleshooting

ProblemLikely causeFix (from the manual)
Power switch does not lightPower cord not connected to the outletCheck the power cord connection to the outlet. Page 3
Ink or paper dust on folded bookletsFolding rollers contaminated with ink or paper dustTurn off the unit, remove the four roller cover screws, and clean the rollers with Martin Yale Roller Cleaner on a cloth. Page 3

Frequently asked questions

How many pages can the BM101 make into a booklet?

Up to 40 pages: 10 sheets of 20 lb bond with a cover (page 2).

What paper sizes does the BM101 accept?

8 1/2" x 11", 8 1/2" x 14", 11" x 17", A3, A4, B4 and B5 (page 2).

What staples does it use?

Standard staples, in two 4-position staplers (page 2).

How do I stop the folding motor?

Release the handle or return it to the stapling position (page 3).