Martin Yale PolyBoard Cutter Instructions, page 1

Page 1 of 3

Martin Yale PolyBoard Cutter Instructions, page 2
Text on page 2

PolyBoard Paper Trimmers

P215Xpartslist

P212Xpartslist

PartNumber Descnption

M-O017801 Polyarm Handgrip

M-O017801 Poly Arm Hand Grip

W-0017811 15"Curvedblade 12"Curved Blade

M-S004019 Poly Blades Crew Poly Blades Crew

W-0017823 15"Poly Guard

W-0017813 12"Polytrimguard

W-0017822 15"Bedblade

12"BEDBLADE

Poly Board Rubber Feet

M-S030018 Poly Board Rubber Feet

Key Features and Benefits

  • Self-sharpening stainless steel blades cutup to10 sheets

Patented automatic blade latch locks with every cutting motion

Finger guard helps protect the entire blade length

Torsion spring counterbalances blade arm

Non-skid feet

P218Xpartslist

PartNumber Descnplion

Model Numbers

M-O112006 Hand Gripw/Trigger

W-0017726 Fingerguard

P212X-12"cutting length

6X5/8PHILFLTHDAB

W-0017818 18Polystraightblade

P218x-18"cutting length

M-S030018 Poly Board Rubber Feet Madeinusa

Page 2 of 3

Martin Yale PolyBoard Cutter Instructions, page 3
Text on page 3

Operating Instructions

  1. Place the trimmerona flat,stable surface
  2. Release the blade latch,which is located on the hand grip (A)
  3. Lift the blade arm (B) up into cutting position
  4. Using therulersor the 1/2"grid,align thepaper to the proper pos i- tion,pushing it up against thepaper guideruler(F).

Caution:

Keep hands and fingers behind the finger guard (E) atall times,awayfromthecuttingblades

  1. While holding thepaper down with your left hand (tomakesure it stays in place),pull down theblade arm(B)to cut.
  2. Alwaysmake sure that theblade arm is completely down and locked when not in use. Safety Information

Key Components Alwaysensurethatthebladearmisfullypusheddown,andthat

A-Hand Grip(notemodelP218Xhas a different stylegrip and latch) thebladelatchisengaged,whennotinuse BladeArm Never operate the trimmer without the finger guard in place PolyBoard Base Alwayskeepclothing,jewelry,watches,andhairawayfrom

the cutting blade

Alignment Ruler

Keepoutof the reach of children

  • Finger Guard

Donotcarry the trimmer by the hand grip or thebladearm

  • Paper Guide Ruler

ForBest Cutting Performance

UseTrim-EaseBladeLubricantforasmoothercutand tohelp

  1. Place the trimmer on a flat surface

preserve thelifeof thecuttingblade.Toorder,send$4.00perstickand

  1. Hold the top of theblade arm(B)with one hand,being careful not
  2. Slide the hand grip(A)onto theblade arm(B).The tabon the bladearm(B)shouldsnap firmly into the notch on the hand Customer Service grip(A).The trimmeris nowready for use. Telephone: (260)563-0641

Email: info@martinyale.com

Internet: www.martinyale.com

Push onto arm until grip Address: MartinYaleIndustries,Inc. "snaps"into position 251WedcorAvenue Wabash,IN 46992

Page 3 of 3 · End of manual

Quick start

  1. Place it: Put the trimmer on a flat, stable surface.
  2. Attach the grip: Slide the hand grip onto the blade arm until the tab snaps firmly into the notch.
  3. Release the latch: Release the blade latch on the hand grip.
  4. Raise the arm: Lift the blade arm up into cutting position.
  5. Align the paper: Use the rulers or the 1/2 inch grid. Push the paper up against the paper guide ruler.
  6. Cut: Hold the paper down with your left hand and pull down the blade arm.
  7. Lock it: When you are done, make sure the blade arm is completely down and locked.

Troubleshooting

ProblemLikely causeFix (from the manual)
Risk of cutting your handsHands are near the blade.Keep hands and fingers behind the finger guard at all times. Page 3
Blade arm is not locked when not in useThe arm is not fully down.Push the blade arm fully down and make sure the blade latch is engaged. Page 3
Hand grip is looseThe grip is not snapped on.Slide the grip onto the blade arm so the tab snaps into the notch. The P218X has a different style grip and latch. Page 3
Cut is rough or blade wears fasterThe blade needs lubricant.Use Trim-Ease Blade Lubricant for a smoother cut and longer blade life. Page 3
Damage or injury when moving the trimmerIt was carried by the hand grip or blade arm.Do not carry the trimmer by the hand grip or the blade arm. Page 3

Frequently asked questions

How many sheets can the PolyBoard cut?

The self-sharpening stainless steel blades cut up to 10 sheets. See page 2.

What cutting lengths are available?

The P212X cuts 12 inches and the P218X cuts 18 inches. See page 2.

Can I run it without the finger guard?

No. Never operate the trimmer without the finger guard in place. See page 3.

How do I get a smoother cut?

Use Trim-Ease Blade Lubricant. It also helps preserve the life of the blade. See page 3.

Where do I put the trimmer when not in use?

Keep the blade arm fully pushed down with the blade latch engaged, and keep the trimmer out of the reach of children. See page 3.