Martin Yale T15 Instructions, page 1

Page 1 of 3

Martin Yale T15 Instructions, page 2
Text on page 2

SharpCut Paper Trimmers

T12 PARTS LIST

Key Features and Benefits

  • Heavy-duty 1/2” thick wood base
  • Hardened self-sharpening stainless steel blades cut up to 15 sheets
  • Permanent 1/2” grid and dual rulers for proper paper alignment
  • Patented automatic blade latch locks with every cutting motion
  • Finger guard helps protect the entire blade length
  • Torsion spring counterbalances blade arm
  • Non-skid feet

T15 PARTS LIST

Model Numbers

T12 – 12” cutting length T15 – 15” cutting length

Literature Part No. M-S027085

MADE IN USA

Page 2 of 3

Martin Yale T15 Instructions, page 3
Text on page 3

Operating Instructions

Safety Information

Key Components

  1. Place the trimmer on a flat, stable surface
  2. Release the blade latch, which is located on the hand grip (A)
  3. Lift the blade arm (B) up into cutting position
  4. Using the rulers or the 1/2” grid, align the paper to the proper position, pushing it up against the paper guide ruler (F).

CAUTION:

Keep hands and fingers behind the finger guard (E) at all times, away from the cutting blades

  1. While holding the paper down with your left hand (to make sure it stays in place), pull down the blade arm (B) to cut.
  2. Always make sure that the blade arm is completely down and locked when not in use.
  • Hand Grip
  • Blade Arm
  • Wood Base with Molded End Caps
  • Alignment Ruler
  • Finger Guard
  • Paper Guide Ruler

Always ensure that the blade arm is fully pushed down, and that the blade latch is engaged, when not in use Never operate the trimmer without the finger guard in place Always keep clothing, jewelry, watches, and hair away from the cutting blade Keep out of the reach of children Do not carry the trimmer by the hand grip or the blade arm

For Best Cutting Performance

Assembly Instructions

  1. Hold the top of the blade arm (B) with one hand, being careful not to touch the blade, and the hand grip (A) with the other hand.
  2. Slide the hand grip (A) onto the blade arm (B). The tab on the blade arm (B) should snap firmly into the notch on the hand grip (A).
  3. Place the rubber feet into position on the bottom of the trimmer.

Pus h

“sna onto a

ps” rm u into n pos til grip ition

Use Trim-Ease Blade Lubricant for a smoother cut and to help preserve the life of the cutting blade. To order, send $4.00 per stick and a self-addressed, stamped envelope to the address below.

Customer Service

Telephone: Fax: Email: Internet: Address:

(260) 563-0641 (260) 563-4575 info@martinyale.com www.martinyale.com Martin Yale Industries, Inc. 251 Wedcor Avenue Wabash, IN 46992

Visit www.martinyale.com for information on office products, including paper folding machines, punches, letter openers, catalog racks, and computer keyboard drawers.

Page 3 of 3 · End of manual

Quick start

  1. Slide the hand grip onto the blade arm until the tab snaps into the notch, and fit the rubber feet.
  2. Place the trimmer on a flat, stable surface.
  3. Release the blade latch on the hand grip and lift the blade arm into cutting position.
  4. Align the paper using the rulers or 1/2" grid, pushing it against the paper guide ruler.
  5. Hold the paper down with your left hand, keeping fingers behind the finger guard, and pull the blade arm down to cut.
  6. When finished, push the blade arm fully down and make sure the latch is engaged.

Troubleshooting

ProblemLikely causeFix (from the manual)
Risk of cutting your handsHands are near the blade.Keep hands and fingers behind the finger guard at all times. Page 3
Blade arm is not locked when not in useThe arm is not fully down.Make sure the blade arm is fully pushed down and the blade latch is engaged. Page 3
Hand grip is loose or missingThe hand grip is not attached.Slide the hand grip onto the blade arm until the tab snaps firmly into the notch. Page 3
Cut is rough or blade wears fasterThe blade needs lubricant.Use Trim-Ease Blade Lubricant for a smoother cut and longer blade life. Page 3
Damage or injury when moving the trimmerIt was carried by the hand grip or blade arm.Do not carry the trimmer by the hand grip or the blade arm. Page 3

Frequently asked questions

How many sheets can the T15 cut?

Up to 15 sheets. See page 2.

What is the cutting length?

15" (the T12 is 12"). See page 2.

How can I get a smoother cut?

Use Trim-Ease Blade Lubricant, which also helps preserve blade life. See page 3.

How should the trimmer be stored?

Always with the blade arm fully down and the blade latch engaged. Don't carry it by the hand grip or blade arm. See page 3.