MBM 93M Manual, page 1

Page 1 of 21

MBM 93M Manual, page 2

Page 2 of 21

MBM 93M Manual, page 3
Text on page 3

Please read these operating instructions before putting the machine into operation and observe the safety precautions.

Children must not operate the machine!

Do not touch or insert foreign objects into any rotating part during operation.

Page 3 of 21

MBM 93M Manual, page 4
Text on page 4

Keep long hair clear of machine!

Take care of ties and other loose pieces of clothing!

Remove any paper clips!

Page 4 of 21

MBM 93M Manual, page 5
Text on page 5

Connect the power cord to a single phase socket . 120V/4A

Insert the 1st fold plate(long plate) into the studs (A) and (B) and lock into position.

When the 2nd fold plate(short plate) put in,Please see clearly the labels at both ends as shown.

Put the label indicator: Zigzag fold, Letter fold, and Double fold into the machine. With three folding methods: Letter fold, Zigzag fold, Double fold.

Page 5 of 21

MBM 93M Manual, page 6
Text on page 6

When 2nd fold plate put in, Please see clearly the labels at both ends as shown. Put the label indicator: only single fold into the machine as shown .Only of single fold.

Check that the 2nd fold plate is in the correct position.

Opening the receiving paper platform, pull out the receiving paper stopper. Opening the insert paper platform, pull out the supplementary insert paper plate.

Page 6 of 21

MBM 93M Manual, page 7
Text on page 7

Setting the paper size and folding position. Open the paper guides by loosening the 2 screws and push towards the sides.

Move the paper guides to the edge of the paper. Tighten the screws.

Press down the paper guide and insert paper as far as possible.

Page 7 of 21

MBM 93M Manual, page 8
Text on page 8

Paper Ready:

Fan the paper stack.

Do not fold curly paper.

Do not fold wet paper.

Do not fold paper with clips or staples.

Page 8 of 21

MBM 93M Manual, page 9
Text on page 9

This machine has four folding patterns,(LT、LG). Classified as:

  1. Letter fold

Adjust stopper plate on the 1st fold plate:

Che ck that the paper has been folded

correctly and if necessary adjust the stopper plate on the 1st fold plate and/or 2nd fold plate. As soon as the 1st fold plate is correct, adjust the 2nd fold.

Adjust stopper plate on the 2nd fold plate:

Page 9 of 21

MBM 93M Manual, page 10
Text on page 10

Adjust 2nd fold plate:

Turn the 2nd fold plate 180 degrees (script is in reversed position) and put back into the machine.

Instruction Label:

Setting the paper delivery roller

according to folding patterns.

LG LT

LG LT

Page 10 of 21

MBM 93M Manual, page 11
Text on page 11

Switch on the main switch.

Press the START key → paper will be folded.

Examples of folds on page 15~17

Page 11 of 21

MBM 93M Manual, page 12
Text on page 12

If number of folding paper setting is required, press increase button. Press once, each for 10 sheets up.

Counter returns to “0” when pressing the “C” button.

Disconnect from the main socket if not used for a longer period.

Page 12 of 21

MBM 93M Manual, page 13
Text on page 13

The machine cover must be closed.

Mount the 1st fold plate according to instruction. See “Installation”.

Page 13 of 21

MBM 93M Manual, page 14
Text on page 14

Fix the fold plate tightly (the hook of

the fold plate click on the supportive).

Clear the Jammed paper/refill the paper feeder.

Remove both fold plates and any paper debris.

Open the roller cover. Remove paper debris from the machine. Making sure no debris is left in the paper guides.

Page 14 of 21

MBM 93M Manual, page 15
Text on page 15

Press the “C” button to clear up the malfunctions.

Switch off the machine and wait 1min before switching on again.

Page 15 of 21

MBM 93M Manual, page 16

Page 16 of 21

MBM 93M Manual, page 17
Text on page 17

Adjust stopper plate position

Deviations of stopper plate from label indicator

A、B、C not up to standard

1.First adjust A side to standard, use label indicator as basic benchmark. According to paper thickness, slightly move the stopper plate on the 1st fold plate. Adjust A side as 1/3 of the paper length. 2.Then adjust B side, use label indicator as benchmark, relative to paper thickness slightly move the stopper plate on the 2nd fold plate, adjust to standard.

Page 17 of 21

MBM 93M Manual, page 18
Text on page 18

Adjust stopper plate position

Deviations of stopper plate from label indicator

A、B、C not up to standard

1.First adjust C side to standard, use label indicator as basic benchmark. According to paper thickness, slightly move the stopper plate on the 1st fold plate. Adjust C side as 1/3 of the paper length. 2.Then adjust A side, use label indicator as benchmark, relative to paper thickness slightly move the stopper plate on the 2nd fold plate, adjust to standard.

Page 18 of 21

MBM 93M Manual, page 19
Text on page 19

Adjust stopper plate position

Deviations of stopper plate from label indicator

Double Fold

A、B、C not up to standard

1.First adjust the 1st fold plate according to single opposite folding method, adjust to 1/2 of the paper length.

2.Then adjust the 2nd fold plate, use label indicator as benchmark, relative to paper thickness slightly move the stopper plate, adjust to standard.

Page 19 of 21

MBM 93M Manual, page 20
Text on page 20

Wipe the rubber folding roller,

Wipe the surface on the feeding rollers with MBM roller cleaner.

Wipe the rubber folding roller.

Page 20 of 21

MBM 93M Manual, page 21
Text on page 21

Paper roller and separator, belongs to replaceable consumables.

Remove the paper feed roller.

Remove the folding roller.

Remove the separator with a sharp edged tool and replace them.

Page 21 of 21 ยท End of manual

Quick start

  1. Connect the power cord to a single-phase 120V socket.
  2. Insert the 1st fold plate (long plate) into its studs and lock it in place.
  3. Insert the 2nd fold plate (short plate) with the label for your fold facing as shown: zigzag, letter and double fold one way, single fold turned 180 degrees.
  4. Open the receiving platform and pull out the paper stopper, then open the feed platform and pull out the supplementary plate.
  5. Loosen the two screws, move the paper guides to the edge of the paper and tighten them.
  6. Fan the paper stack and insert it; do not use curly or wet paper or sheets with clips or staples.
  7. Set the paper delivery roller for your fold, switch on the main switch and press START.

Troubleshooting

ProblemLikely causeFix (from the manual)
Paper jamJammed paper in the machine.Remove both fold plates and any paper debris, open the roller cover and remove debris, making sure none is left in the paper guides. Page 14
Machine malfunction indicatedA malfunction has occurred.Press the C button to clear it, or switch off the machine and wait 1 minute before switching on again. Page 15
Fold panels A, B and C are unevenStopper plates deviate from the label indicator.Adjust the stopper plate on the 1st fold plate first, then the 2nd fold plate, using the label indicator as a benchmark and allowing for paper thickness. Page 17

Frequently asked questions

What folds can the MBM 93M make?

Letter fold, zigzag fold, double fold and single fold, on letter (LT) and legal (LG) paper. See page 9.

How do I set the counter?

Press the increase button; each press adds 10 sheets. Press C to return the counter to 0. See page 12.

How do I clean the rollers?

Wipe the feeding rollers and rubber folding rollers with MBM roller cleaner. See page 20.

What parts are consumables?

The paper roller and separator are replaceable consumables. See page 21.