MBM AJ700 Manual, page 1

Page 1 of 14

MBM AJ700 Manual, page 2
Text on page 2

Air Paper Jogger

AJ-700

Operation Manual

Keep this manual at hand where it can be referenced at any time.

Page 2 of 14

MBM AJ700 Manual, page 3
Text on page 3

Introduction

Thank you for purchasing this product.

Please carefully read this Operation Manual for use.

Be sure to read “Safety Instructions” before use.

Keep this Operation Manual in a specific place for handy reference.

1. Safety Instructions (Be sure to observe these) .................................................................... 3

2. Precautions before Use .................................................................................................. 5

3. Components and Functions ........................................................................................... 6

4. How to Use.................................................................................................................... 8

5. How to Jog big size paper (A3SR, Ledger size and etc.) ............................................ 10

7. Daily Maintenance....................................................................................................... 12

7. Other Matters to Note.................................................................................................. 13

8. Specifications .............................................................................................................. 13

Page 3 of 14

MBM AJ700 Manual, page 4
Text on page 4
  1. Safety Instructions (Be sure to observe these)

The following explains what must be observed for preventing bodily injury of user or others, and damage to property.

Safety Instructions

Definition of Symbols and Notes In this manual, the following words and symbols denote possible danger.

This symbol stands for immediate danger threatening the life and health of persons. Disregarding these instructions may cause severe damage to health and even serious injury.

This symbol stands for an endangering situation that may occur. Disregarding these instructions may lead to minor injury or damage to property.

This symbol stands for notes, operational hints, and other useful information. They are convenient for exploiting the machine’s functional abilities.

Danger

Do not place receptacles containing water on the machine.

Do not put any foreign object, such as metal, or inflammable thing inside the machine.

If water is spilled, it may cause fire or an electrical shock.

It may cause fire or an electrical shock.

Do not touch any revolving part of the machine with a hand, or reach a hand into the machine.

Do not remove the machine cover, back cover, etc.

It may cause a bodily injury.

There are parts with very high in voltage that may cause an electrical shock.

Do not dismantle, remodel, or repair the machine.

Do not use any other voltage than AC100V.

It may cause fire, electrical shock, or bodily injury. If repair is required, contact your dealer.

Doing so could cause fire or an electrical shock.

Do not put the machine close to heating equipment.

Do not use inflammable spray inside or near the machine for cleaning or the like.

The machine cover or the coating of power code melts. It may cause fire, electrical shock, or bodily injury.

As gas, which fills the interior, it may ignite and cause a fire or explosion.

Page 4 of 14

MBM AJ700 Manual, page 5
Text on page 5

Danger

Apply the power supply of the designated voltage, and independently use the wall outlet with a proper rated current specified in the serial plate.

If dust is on prongs or prong fitting part of the power plug, wipe the dust off with a dry cloth.

It may cause fire.

If the outlet is used concurrently with other equipment, the branched part of the outlet could overheat and cause fire.

Should any foreign substance, such as metal, water, etc., get inside the machine, be sure to turn off the power first, and then disconnect the power plug from the outlet.

If the machine is used as it is, it may cause fire or an electrical shock. Contact your dealer immediately.

Do not do anything that may damage the power cord or power plug.

(Do not scratch, process, forcibly bend, twist, or pull it, or place heavy object on it, or bundle it.)

Doing so could cause a fire or an electrical shock.

When disconnecting the power plug from the outlet, be sure to grip the plug itself.

Do not unplug the power plug with wet hands.

It may cause an electrical shock.

Pulling the power cord may damage the cord, which could cause a fire or an electrical shock.

Be sure to turn off the power first and pull the power plug from the outlet when cleaning the machine.

Be sure to connect a ground wire.

If an electric leak occurs, it may cause fire or an electrical shock.

The machine may be operated by mistake, causing a bodily injury.

Caution

When the jogger will not be used for several days, such as during consecutive holidays, etc., be sure to unplug the power cord from the outlet for safety’s sake.

Place the machine on a level and stable table or floor with enough space,

otherwise the machine may fall, which could result in bodily injury.

Due to deteriorated insulation, it may cause an electric fire.

Do not place the machine in a humid place or where it could get wet.

Be sure to remove the power plug from the outlet when moving the machine,

Doing so could cause the insulation to deteriorate and cause an electrical shock or fire.

otherwise it may damage the cord, causing fire or an injury.

Page 5 of 14

MBM AJ700 Manual, page 6
Text on page 6
  1. Precautions before Use

Use the designated voltages specified in the serial plate so as to assure operations under constantly stable conditions. As for the power plug, insert it directly into the wall outlet.

2-2 Environment for Use

Use this machine in the following environment. y A place not exposed to direct sunlight. y A place where there is little dust and dirt. y A place where there is little vibration. y A place where there is little salt. y A place where there are no special chemicals.

2-3 Conditions for storage

Keep this machine in storage under the following environment. y A place not exposed to direct sunlight. y A place where there is little dust and dirt. y A place where there is little vibration. yA place where there is little salt. y A place where there are no special chemicals.

In order to maintain proper performance of the product, do not lubricate part of the machine or apply grease to it (except where otherwise noted in this manual).

If any abnormality is found, contact your dealer.

Page 6 of 14

MBM AJ700 Manual, page 7
Text on page 7
  1. Components and Functions

Paper tray vibrates to jog paper.

While supporting the paper tray with one hand, loosen the lever and adjust the tilting angle of the tray, and fasten the lever when the position is determined.

This panel is used to switch on and off the foot operation, vibration, air, timer.

When the foot switch is on, if the foot switch is stepped on, the paper tray vibrates.

Insert the cord into an outlet of the designated voltage.

Set the paper to be jogged in the tray holding the upper part of the paper with its corner down.

This lever is used for fixing the paper tray.

Page 7 of 14

MBM AJ700 Manual, page 8
Text on page 8

If “Cont” is set, by stepping on the foot pedal, continuous operation can be switched between on and off.

If “Foot” is set, the power is on and only when the foot pedal is stepped on, the machine operates, and the timer adjustment knob can be used.

Note: When the job is finished or suspended, be sure to set “OFF” in the middle position.

When “ON” is set, the paper tray jogs.

As it is turned clockwise, the air gets stronger, and when it is turned counterclockwise to the extreme, “OFF” is set.

Jogging from 0 to about 60 seconds as well as air operation time can be adjusted.

When the circuit for jogger has abnormal, the fuse blows.

When the circuit for air is abnormal, the fuse blows.

When the switch is set to “OFF”, the timer adjustment knob will not work.

When the switch is “ON”, it works.

If the foot pedal is stepped on once, air and jogger will stop when the set time has expired.

If the foot pedal is continuously stepped on, air only will stop when the set time has expired.

Page 8 of 14

MBM AJ700 Manual, page 9
Text on page 9
  1. How to Use

Paper tray tilting angle adjustment

y Holding the lower center of the paper tray head’s front face, loosen the fixing lever to adjust the tilting angle. Then tighten it at an appropriate position.

y When adjusting the tilting angle, be sure to turn the switch off and hold the lower center of the paper tray head’s front face. If the part indicated with an arrow in the following photo is held, it may cause bodily injury. y Fasten the fixing lever tightly so that it may not be loosened while the machine is in use.

Do not hold this part.

y In general, for thick paper, the tilting angle is adjusted vertically and for thin paper, it is adjusted horizontally.

How to use the AIR and JOGGER switch

y When the AIR switch is set to “ON”, air blows out from the paper tray while the machine is operating. When the JOGGER switch is “ON”, the paper tray vibrates. y Both AIR and JOGGER switches should normally be set to "ON" for jogging. When only AIR switch is set "ON", air blow without jogging is effective for just loosening a stack of papers or drying ink.

Page 9 of 14

MBM AJ700 Manual, page 10
Text on page 10

How to Use the TIMER

  1. Set the TIMER switch to ON.
  2. Turn the dial for operating time adjustment and set the desired time. (The scale of TIMER time, which is just for indication, can be selected between 0 and 60 seconds. Set it while checking jogging irregularity).
  3. While the power switch is set at “Foot” operation, air blow and jogging operation start when the foot switch is stepped on once, and they will stop when the set time has passed. If the foot switch is continuously stepped on, air blow only will stop when the set time has come, and when the foot switch is taken off, the jogging operation will also stop. Adjust it depending on the conditions.

How to Jog neatly

y Step on the foot switch briefly to take advantage of strong and weak vibration. If operation time is adjusted using the TIMER, the job can be repeated in the optimal time. y In case paper before jogging is loosened by letting air in, make the thickness of the paper loaded at once less than 60 mm (24”). y Also, when jogging collated paper, make the thickness less than 60 mm (24”).

How to Use the Paper Guide

y Use the paper guide when the paper bends and is hard to handle.

Page 10 of 14

MBM AJ700 Manual, page 11
Text on page 11

How to Jog big size paper (A3SR, Ledger size and etc.)

  1. When big size paper such as A3SR or ledger size will be jogged, install the attached A3 guide.

Fasten the countersunk screws at the four locations.

  1. In order to prevent the paper from being bent, adjust the paper tray horizontally.

Page 11 of 14

MBM AJ700 Manual, page 12
Text on page 12
  1. When using the paper tray while setting it horizontally, load sheets of paper little by little (If the paper is loaded in mass, the tray receives the weight all at once, which makes it difficult to jog the paper properly).
  • Loosen the paper so as to let air in it.

Page 12 of 14

MBM AJ700 Manual, page 13
Text on page 13
  1. Troubleshooting

Paper is irregularly jogged.

Air blow is weak.

  1. Is the paper size non-standard?

Jog it while loosening it by hand.

  1. Does the paper have static electricity?

Put some space between the sheets by hand.

  1. Is too much paper loaded?

Reduce the volume of paper used at one time.

  1. Is air adjustment knob set to “Weak”?

Turn the adjustment knob to “Strong”.

  1. Is any paper scrap or the like stuck in Clean the inlet and outlet. air inlet or outlet?

y If the trouble is not resolved in spite of the above measures, blower maintenance may be required. Contact your dealer.

No air is discharged.

  1. Is the AIR switch set to “OFF”?

Set the AIR switch to “ON”.

  1. Is the fuse 2 blown out?

y If the fuse blows again, the cause may be located within the machine. Contact your dealer.

No vibration is made.

  1. Is the JOGGER switch set to “OFF”?

Set the JOGGER switch to “ON”.

  1. Is the fuse 2 blown out?

y If the fuse is blown again, a cause may be located within the machine. Contact your dealer.

  1. Daily Maintenance

y Clean the air outlet in the paper tray so that it will not gather paper slips or dust. y Clean the air inlet filter (located on the left side of the machine) on a regular basis.

Page 13 of 14

MBM AJ700 Manual, page 14
Text on page 14
  1. Other Matters to Note

y When moving the machine, be sure to hold the machine while paying attention to the entire balance instead of holding the paper tray or the upper part of the stand only. y Do not apply a strong force, such as pushing or pulling, to the paper tray. Doing so might damage it. y “OFF” and “Foot” on the power switch are in the same position when it is just switched, but in case “Foot” operation is set, the machine operates when the Foot switch is stepped on. Be careful about these conditions. y Do not place heavy objects on the machine. The object may fall, causing a bodily injury.

y Since loosening is made by blowing air, dust or the like may get in the user’s eyes. recommended that safety glasses, etc., be worn when operating this machine.

  1. Specifications

Jogger (with air loosening device) stand type

Unbalance weight adjustment method

Max: A3SR 320 × 450 mm (approx. 12.5” × 17.5”)

Min: B6 128 × 187 mm (approx. 5.0” × 7.4”)

Vibration switch ON/OFF function

460 (W) × 395 (D) × 1025 (H) mm (19” (W) × 16.5” (D) × 41.3” (H))

  • when the paper tray is vertically placed.

34.8kg (approx. 77 lbs.)

120VAC/50 - 60 H2 or 230V/50 - 60 H2

[Accessories] Operation Manual, paper guide

Specifications and appearance are subject to change without prior notice due to continual improvements.

Page 14 of 14 ยท End of manual

Quick start

  1. Check power: The AJ-700 air paper jogger runs on AC100V only. Use a dedicated wall outlet with the rated current on the serial plate and connect the ground wire.
  2. Place it: Put the machine on a level, stable table or floor with enough space, away from heaters and wet areas.
  3. Tilt the tray: Turn the switch off, hold the lower center of the paper tray head front face and loosen the lever. Thick paper usually needs a vertical angle and thin paper a horizontal one. Tighten the lever.
  4. Set AIR and JOGGER: For normal jogging set both to ON. AIR alone loosens a stack or dries ink.
  5. Pick the operating mode: "Foot" runs only while the pedal is pressed and allows the timer. "Cont" lets the pedal turn continuous operation on or off. Set "OFF" in the middle when done.
  6. Set the timer: Turn the TIMER switch ON and dial a time between 0 and 60 seconds while checking for jogging irregularity.
  7. Load the paper: Load less than 60 mm (24 in) at a time. Hold the upper part with the corner down. Use the paper guide if the paper bends. Install the A3 guide for A3SR or ledger size.

Troubleshooting

ProblemLikely causeFix (from the manual)
Paper is jogged irregularlyNon-standard paper size, static electricity, or too much paper loaded.Loosen the paper by hand, put space between sheets, or reduce the amount loaded at once. Page 13
Air blow is weakThe air adjustment knob is set to Weak, or paper scrap is stuck in the air inlet or outlet.Turn the knob toward Strong and clean the inlet and outlet. If it persists, contact your dealer. Page 13
No air is dischargedThe AIR switch is OFF or the fuse is blown.Set the AIR switch to ON. If the fuse blows again, contact your dealer. Page 13
No vibrationThe JOGGER switch is OFF or the fuse is blown.Set the JOGGER switch to ON. If the fuse blows again, contact your dealer. Page 13
Timer adjustment knob does nothingThe TIMER switch is OFF.Set the TIMER switch to ON. Page 8
Air flow drops over timeThe air outlet in the tray or the inlet filter on the left side has gathered dust or paper slips.Clean the air outlet and the inlet filter regularly. Page 13

Frequently asked questions

What voltage does the MBM AJ700 use?

It must be used only with AC100V. Use a dedicated outlet with the rated current shown on the serial plate and connect the ground wire. See page 4.

How much paper can I load into the AJ-700 at once?

Keep the thickness less than 60 mm (24 in), both for loosened paper and collated paper. See page 10.

How do I jog ledger or A3SR paper?

Install the attached A3 guide using the four countersunk screws and set the paper tray horizontally to stop the paper from bending. See page 11.

What does the timer do?

It sets how long air and jogging run, from 0 to about 60 seconds. In Foot mode one press runs air and jogger until the time is up. See page 10.

How do I adjust the tray angle?

Switch off, hold the lower center of the tray head front face, loosen the fixing lever and set the angle, then tighten the lever. Never hold the part marked with an arrow. See page 9.