AP 100

Please read and follow all safety rules and instructions in this manual before operating.

EN

TABLE OF CONTENTS

Safety precautions

1. When Installing
2. When Using
3. When Cleaning

Names of Each Part Screen Composition Installing and Preparing

1. Select Installation Location

2. Filter Installation

1. Initial Action

2. Auto Mode

3. Set Fan Speed (Manual Mode)

4. PlasmaWave®

5. Sleep Mode

6. Set Timer

7. Set Wi-Fi Connection

8. Set Brightness

9. Set Volume

How to Manage and Clean

1. How to Replace Filter
2. How to Clean Pre-Filter
3. How to Clean Fine Dust Sensor
4. Cleaning exterior / cleaning interior

Malfunction and Checking Measures Product Specifications Warranty

Fine Mesh PM2.5 Filter Cleancel® Pre-Filter

Cleansing

filter section

Antimicrobial Active Carbon Filter Material

Stage 1: Fine Mesh Cleancel ® Pre-Filter Filters large household particles such as dust, pet hair, pollen, and lint.

Stage 2: PM2.5 Filter Removes 99.9% of ultrafine pollutants measuring 2.5µm by mounting a PM2.5 exclusive filter.

Replacement

filter section

Stage 3: Antimicrobial Material Removes 99.9% of viruses, bacteria, and mold that cause diseases.

Stage 4: Active Carbon Filter Removes foul smells and harmful gases indoors by absorbing odor particles from food, mold, cigarette smoke, etc, in the activated carbon micro orifice with a high-performance granular active filter.

Fixed

section

Stage 5: PlasmaWave ® Provides clean air by removing various harmful substances from the air as well as bacteria and mold that can cause diseases.

Replacement

filter section

Stage 6: True HEPA Filter Filters not only PM2.5 ultrafine dust but also 99.97% of fine pollutants that measure 0.3µm.

FEATURES

Smart sensor

Outdoor/indoor

environment information

Operates automatically by comprehensively analyzing and detecting indoor air contamination levels through dust/smell/ illumination level sensors.

The home screen shows local weather data, as temperature, weather conditions and Pollution level (dust PM2.5) along with the indoor air conditions.

Full-Color LCD touch screen

The 4-inch Full-Color LCD touch screen provides innovatively improved usability and convenience.

Automatic filter management

Various operation modes

Various functions, such as auto, manual, and sleep modes can be selected as desired depending on the living environment.

IAM artificial intelligence system

This allows a clean and pure living environment to be maintained at all times by responding automatically to the condition of indoor air, and can be controlled remotely even from outside when the user goes out, goes to work, or goes on a trip.

The current condition of the filter can be seen through an exclusive APP and the LCD touch screen, and an alarm and message informs the user in advance when it is time to replace a filter.

Mobile remote control

A mobile device can be used as an indoor remote control and used to check the condition of the indoor air by connecting it to the air purifier.

Timer setup

The timer can be set to run the product between 1 and 12 hours and to power off automatically.

PACKAGE CONTENTS

Luftreiniger Air Purifiers Purificateur

Bitte lesen Sie vor Inbetriebnahme des Gerätes unbedingt diese Betriebsanleitung und beachten Sie die Sicherheitshinweise. Please read and follow all safety rules and instructions in this manual before operating. Nous vous prions de lire attentivement le mode d’emploi avant d’utiliser la machine, et attirons votre attention sur les consignes de sécurité.

Safety Instructions | Installation

Product Specifications

Before operating this equipment, carefully read and follow these safety cautions and instructions to avoid damage and ensure safe use.

WARNING

Follow these instructions to reduce the risk of serious injury or death.

NOTICE

Failure to follow these safety instructions may lead to personal injury or property damage.

Installation

Do not place near flammable materials (aerosol sprays, fuel oil, gases, etc.).

Do not install below an electrical outlet.

This may cause fire.

This may cause an explosion or fire.

Do not place near any gas- or heatproducing appliances, such as gas appliances, heaters, and fireplaces.

This may cause the unit to become deformed, discolored, or to catch fire.

Do not install where large quantities of noxious gases are present, including carbon monoxide and gases emitted by animals.

This may cause the unit to break down.

Installation | Safety Instructions

Installation

Do not install near electronics such as TVs, radios, or air conditioners.

Do not place the unit facing into wind or drafts.

Electromagnetic interference may cause the unit to malfunction.

This may cause the sensors to fail.

Do not install under direct sunlight, lighting fixtures with inverters, or lighting fixtures with automatic detection sensors.

Do not use around mist or fumes from industrial oil or around large quantities of metallic dust.

This may cause the unit’s sensors to malfunction.

Do not install in confined spaces or on slanted or uneven surfaces.

This may cause produc t failure or deformation.

This may result in fire or may cause product failure.

Donotinstallina ny sortof transport (motor vehicles, boats, ships, etc.).

Safety Instructions | Operation

Operation

Do not use in places that are very humid or moist or where the unit may get wet, such as bathrooms.

This may result in fire or electric shock.

Do not plug other appliances into the same outlet. Provide an exclusive outlet for this unit.

Unplug the power cord when not in use for long periods.

Leaving it plugged in could cause the insulation to deteriorate, posing a risk of short circuit and fire.

Do not pull on the power cord when unplugging the unit.

This may cause electric shock or fire.

Also, do not arbitrarily extend the power cord. Risk of electric shock or fire may result from plugging several appliances into one outlet, modifying the power cord, or using an extension cord.

Do not touch the plug with wet hands.

This may result in electric shock.

Do not damage the power cord by forcefully bending, pulling, twisting, bundling, or pinching it, or by placing heavy objects on it.

Damaging the power cord could lead to a short circuit, resulting in electric shock or fire.

Operation | Safety Instructions

AP 100

Operation

Do not unplug or move the unit while it is running.

Make sure the filters have been inserted before running the unit.

This may cause product failure or fire.

Running it without filters shortens the product’s service life and may cause electric shock or injury.

Do not touch the interior of the unit with wet hands.

Do not insert foreign objects into the vents, such as pins, rods, and coins.

The high voltage may cause electric shock.

Make especially sure that children follow safety rules around the unit. Unsafe behavior may result in product failure or injury from burns or electric shocks.

If the unit becomes submerged in water, unplug it and contact the service center.

When cooking foods with strong odors, reduce use of the unit as much as possible.

If you attempt to dry and operate the unit after it has been submerged, this could result in product failure, electric shock, fire, or injury.

The filters may become permeated with the cooking odors, possibly affecting the filters’ performance and service life.

Safety Instructions | Operation

Operation

Do not step on or place heavy objects on top of the unit.

This could result in personal injury, or may cause product failure or deformation.

If the product emits unusual noises, smells, or smoke, unplug the power cord immediately and contact the IDEAL service center.

Such occurrences may lead to electric shock or fire.

Do not subject the product to strong blows or physical shocks.

This may lead to product failure.

Do not use in places with extremely high or low temperatures.

This product is for indoor use (5-30˚C). Using it outside this temperature range may cause deformation, discoloration, or shortened filter life.

Never disassemble, repair or modify this product yourself.

This may cause product failure, electric shock, or fire. If repairs are needed, contact the service center.

Do not allow intake or outlet vents to become blocked, for instance by furniture, laundry, curtains, or other objects.

Such blockage may lead to increased internal temperatures, causing product deformation.

Cleaning | Safety Instructions

Operation

Do not tie up or bundle the power cord when operating the unit.

This may cause electric shock or fire.

Do not use for specialized purposes or sites, such as places devoted to animals and plants, precision instruments, or art conservation.

Cleaning

Do not use flammable sprays or liquid detergents.

This may cause product failure, electric shock or fire.

Do not allow children to clean or maintain the unit by themselves.

Adult supervision is absolutely necessary.

Do not let water run over the Unit.

This may lead to product failure, electric shock or fire.

Before cleaning or performing maintenance, unplug the power cord and be sure the fan has stopped.

Not doing so could result in electric shock or injury.

Set-up | Names of parts

Name of Each Part

| Front |

Air vent (4 directions)

Light detecting sensor Full Color LCD Touch screen

Names of parts | Set-up

| Back |

Top cover release button

4 True HEPA Filter

PlasmaWave ® (interior)

3 Active Carbon Filter

2 Antimicrobial PM2.5 Filter

1 Fine Mesh Cleancel® Pre-Filter

Set-up | Names of parts

Screen Composition

| Main (Home) Screen |

The color of the main screen will change depending on the condition of the indoor air. Brown: poor / Green: fair / Blue: good

Temperature

condition display

Contamination level

information

Wi-Fi

Current exterior

environment information

Power

The power to the Displays indoor contamination level air purifier can be turned off. along with the main screen color.

PlasmaWave®

Menu

Displays when PlasmaWave is in operation.

Selecting the menu will display 6 menu items at the bottom of the screen.

Current fine

dust

Current

temperature

Sleep mode

Sleep mode can be setup.

Current

weather

Fan speed

condition

Displays wind speed currently in operation.

Power off

reservation time

Auto mode

Automatically sets wind speed depending on the condition of indoor air.

Manual mode

The user can set the desired mode.

Names of parts | Set-up

AP 100

| Menu Screen |

Set volume

Set brightness

Home (Main Screen)

This is used to return to the main screen.

Set Wi-Fi

The Wi-Fi function can be turned on or off.

Set fan speed

Sleep mode

Set language

4 fan speeds can be set: <Low Mid  High Turbo>

Operates in sleep mode and darkens display.

German, English, French

PlasmaWave®

Set timer

Setup

Can be used as an air purification function.

Use when wishing to operate only during a specific time.

Sets up the Wi-Fi, brightness, volume, and filter.

Filter replacement

Can check the condition of the filterindoor air quality.

Set-up | Names of parts

| Alert/Verification Window |

Alert pop-up window

Appears when the filter replacement time is notified, when the filter cover is opened, and when the filter cover is closed

Verification pop-up window

Appears when a problem occurs with the product, when asking for verification for Wi-Fi initialization, and when power is turned off during operation.

Installation and set-up | Set-up

Installation and set-up

1. Choosing a location

A location that has low humidity and is well ventilated

There may be a risk of electric shock or product malfunction due to rust.

Place it in an indoor location away from direct sun.

Direct sun may cause product malfunction or failure.

Choose a location an adequate distance from TVs, radios, and other electronic products.

Electromagnetic interference from certain electronics may cause product malfunction.

Allow at least 12-18 inch of space around the unit.

Place at least 4 inch from any wall.

Place on a hard, flat surface

Placement on flimsy or slanted surfaces may result in abnormal noise and vibrations.

Set-up | Installation and set-up

All filters are assembled and packaged before being shipped out of the factory. The packaging of filters must be removed before use.  Failure to remove the packaging before operating the product may result in malfunction. Filters must be replaced only while the power is turned off.

 1 Fine Mesh Cleancel® Pre-Filter, 2 Antimicrobial PM2.5 Filter,

3 Activated Carbon Filter installation

① Push the two buttons on the filter

cover at the bottom of the product towards the middle and take the cover off by pulling it towards you.

② Pull the new filter from the vinyl

③ Remove the vinyl packaging from

X X Failure to remove the vinyl packaging before use may result in abnormal noise, product deformation or fire caused by overheating of the motor.

Installation and set-up | Set-up

D ① 1 Fine Mesh Cleancel® Pre-Filter

2 Antimicrobial PM2.5 Filter 3 Active

Carbon Filter. Push the filters in this order to the very back of the product.

3 Active Carbon Filter

2 Antimicrobial PM2.5 Filter

1 Fine Mesh Cleancel® Pre-Filter

Please make sure that the pre-filter is not flipped upside down before inserting. Dust filtered during operation will fall to the bottom of the air purifier during filter changes if the pre-filter is flipped upside down.

E ② Push the two buttons on the filter

cover towards the middle to attach it to the product.

Set-up | Installation and set-up

 4 True HEPA Filter installation

① Press the release buttons on either

side of the top cover and lift the cover off.

② Pull the new filter out and remove

x x Failure to remove the vinyl packaging before use may result in abnormal noise, product deformation or fire caused by overheating of the motor.

③ Insert the new 4 True HEPA Filter.

④ Press the release buttons on either

side of the top cover and attach it to the product.

⑤ Filter cleaning and replacement

1 Fine Mesh Cleancel® Pre-Filter

2 times per month

2 Antimicrobial PM2.5 Filter

3 Active Carbon Filter

4 True HEPA Filter

 T h e re m ay beadif fe re n ce inthefil te r re p l a ce m e nt c yc ledependingonusage environment.

Filter purchase inquiries: www.ideal-health.de

▶ ▶ Please refer to pages 68~69 for details on how to replace filters

How to Use | Operation

How to Use

① Insert the power plug into a power outlet.

power plug into a power outlet (❷).

x x The Display Panel lights will turn on and then off.

② Press the "Power" button. x x A start video will play along with music as the power is turned on.

▶ ▶ For the first 4 minutes, the product’s smart sensor will measure the surrounding air cleanliness level.

Operation | How to use

① "Auto", "PLASMAWAVE", "Regional Info", etc.

will be displayed and the product will run.

x x The fan speed will be set automatically depending on the indoor air contamination level and PlasmaWave® will run to remove harmful substances in the air. x x The color of the main button will change to brown (poor), green (fair), or blue (good) depending on the condition of the indoor air.

 To turn the power off

Press the "Power" button.

x x When you press the "Power" button, the power goes off.

How to Use | Operation

2. Auto Mode

Runs automatically by detecting indoor air contamination level.

x x The product will run with "PlasmaWave®" displayed. x x The fan speed will be adjusted automatically depending on indoor air contamination level and PlasmaWave® will run to remove harmful substances from the air.

▶ ▶ Once the indoor air is cleaned, the wind speed will be set to run continuously as "low". ▶ ▶ The electric noise that emanates during operation is the normal sound produced by PlasmaWave and does not signify a malfunction.

3. Fan speed setup (manual mode)

Runs automatically by detecting indoor air contamination level.

② Select "Fan speed setup" and select the desired "Fan speed".

Operation | How to use

4. PlasmaWave®

This air purification function removes harmful substances from the air.

② Select "PlasmaWave®" and then select "ON".

x x PlasmaWave® will begin running.

5. Sleep Mode

② Select "Sleep" and then select "ON".

x x Sleep mode will run and the display will darken.

▶ ▶ If the wind speed is changed by pressing the "Fan speed" button, sleep mode will be cancelled and the product will return to manual mode. ▶ ▶ Selecting sleep mode will automatically turn off PlasmaWave®.

How to Use | Operation

6. Timer Setup

Select this if you wish to run the product during a specified time.

① Select "Menu".

② Select "Power off reservation" and then select "-" or "+".

x x You can set up to "12 hours". x x Selecting " - " will decrease by 1 hour, while selecting " + " will increase by 1 hour.

The LCD language can be set to English, German and French.

1. Select the Menu Screen.
2. Select the Language Screen.
3. Select which language to displayed.

Operation | How to use

7. Set Wi-Fi connection

Things to know before connecting to Wi-Fi

x x Prepare the wireless router to be connected to the air purifier. x x An error will occur during setup if two or more wireless routers are connected. x x If several air purifiers are to be set up, do it individually one by one. x x The air purifier, wireless router, and mobile device must be within 32 ft in order to be connected and setup. x x Before registering, check the Wi-Fi name and password of the location you wish to install in.

When connecting for the first time after being shipped from the factory.

① Select "Power" and then select "Menu".

② Select "Setup", select "Wi-Fi", select "ON".

x x The "Wi-Fi" icon will flicker.

③ To install the IDEAL air app, search for "IDEAL air" in the

App Store or in the Google Play Store.

④ Run the downloaded exclusive APP and follow the app’s

instructions to register the wireless router.

x x Enter the name and password of the Wi-Fi you wish to use.

▶ ▶ Please check the Wi-Fi name and password in advance.

⑤ Check the Wi-Fi connection.

x x Wi-Fi is connected once the "Wi-Fi" icon stops blinking. x x Wi-Fi icon can keep blinking up to for 3 minutes depends on local weather data reception status even wifi connection is done.

How to Use | Operation

 Re-setup ∙ If you wish to use it in an area that is different from the Wi-Fi area that was initially setup. ∙ If you wish to delete the mobile device that was being used and register a new mobile device.

① Select "Menu" and then select "Setup".

② Select "Wi-Fi" and then

x x A pop-up window will appear that asks to confirm Wi-Fi initialization.

x x Wi-Fi setup will be initialized.

④ To install the IDEAL air app, search for "IDEAL air" in

the App Store or in the Google Play Store.

⑤ Run the downloaded exclusive APP and follow the

app’s instructions to register the wireless router.

x x Enter the name and password of the Wi-Fi you wish to use.

▶ ▶ Please check the Wi-Fi name and password in advance.

⑥ Check the Wi-Fi connection.

x x Wi-Fi is connected once the "Wi-Fi" icon stops blinking. x x Wi-Fi icon can keep blinking up to for 3 minutes depends on local weather data reception status even wifi connection is done.

Operation | How to use

8. Set Brightness

① Select "Menu" and then select "Setup".

② Select "Brightness" and then select "-" or "+".

x x Selecting "-" will gradually darken the screen, while selecting "+" will gradually brighten the screen.

9. Set Volume

① Select "Menu" and then select "Setup".

② Select "Volume" and then select "-" or "+".

x x The volume can be set to 6 levels x x Selecting "-" gradually decreases the volume, while selecting "+" gradually increases the volume

Operating the air cleaner | Operation

How to Manage and Clean

1. How to Replace Filter

 Checking the filter

① When it appears, touch the

pop-up window that alerts you it is time to replace the filter.

▶ ▶ A pop-up window will appear when it is time to replace a filter. ▶ ▶ The pop-up window will disappear if you touch anywhere on the screen other than the pop-up window.

② You can check each filter’s

extent of use by going to the filter setup screen.

x x Each block on the scale in the filter setup screen represents 1 month, and filters whose scale is empty must be replaced.

① Close the filter cover once the filter is replaced.

(Please refer to pages 68~69 for how to replace filter)

X X A pop-up window will appear and an alert tone will ring if the filter cover is not closed properly.

Operation | Operating the air cleaner

B ① Select "YES" if a pop-window

appears asking to reset a filter.

C ② Select "Reset" for filters that

D ③ Select "Yes" if a pop-up window appears asking to confirm

x x The filter setup will be initialized.

E ④ Filter cleaning and replacement cycle.

1 Fine Mesh Cleancel® Pre-Filter

2 times per month

2 Antimicrobial PM2.5 Filter

3 Active Carbon filter

4 True HEPA filter

T here may be a difference in the filter replacement cycle depending on usage environment.

Filter purchase inquiries: www.ideal-health.de

Operating the air cleaner | Operation

 1 Fine Mesh Cleancel® Pre-Filter, 2 Antimicrobial PM2.5 Filter, 3 Active Carbon Filter replacement

① Push the two buttons on the filter

cover at the bottom of the product towards the middle and take the cover off by pulling it towards you.

② Hold the grips on either side of the

3 Active carbon filter and pull it out. Hold the grips of the 2 Antimicrobial PM2.5 filter and pull it out. Hold the grip on the front of 1 Fine Mesh Cleancel® Pre-filter and pull it out.

③ 1 Fine Mesh Cleancel® Pre-Filter 2 Antimicrobial PM2.5 filter 3 Activated carbon filter. Push the filters in this order to the very back of the product.

3 Active Carbon filter 2 Antimicrobial PM2.5 filter 1 Fine Mesh Cleancel® Pre-Filter

X X Please make sure that the pre-filter is not flipped upside down before inserting.

④ Push the two buttons on the filter

cover towards the middle to attach it to the product.

X X Only genuine IDEAL filters must be used.

Operation | Operating the air cleaner

 4 True HEPA filter replacement

① Press the release buttons on either

side of the top cover and lift the cover off.

② Hold the grips on either side and

pull the filter out.

③ Insert the new 4 True HEPA filter.

x x Make sure to remove the vinyl packaging from the new filter set before using. x x Failure to remove the vinyl packaging before use may result in abnormal noise, product deformation or fire caused by overheating of the motor.

④ Press the release buttons on either

side of the top cover and attach it to the product.

X X A pop-up window will appear and an alert tone will ring if the filter cover is opened.

Operating the air cleaner | Operation

2. How to Clean Pre-Filter

The filter cleaning time may differ depending on the surrounding contamination levels.

Clean using a vacuum cleaner or a soft brush, and use a neutral detergent to clean if it is heavily contaminated.

x x With the exception of water, do not clean using volatile substances, alcohol, acetone, etc. x x Cleaning around 2 times per month will allow you to use a filter semipermanently.

X X Make sure to unplug and allow the product to cool down completely before cleaning. X X Do not use benzene, alcohol, or other volatile detergents as they may cause damage or discoloration. X X The pre-filter can be cleaned and reused. X X Do not use volatile liquids such as water that is hotter than 40°C or thinners. X X Filters must be replaced if the contamination is severe to the point that cleaning is not possible. X X Filters must be dried completely in a place where air flows well because filters that are not dried completely can result in them giving off a bad smell.

Operation | Operating the air cleaner

3. How to Clean Fine Dust Sensor

The dust sensor detects the contamination level of dust, so it is recommended to clean the sensor once every two months for the air purifier to function optimally. Please clean the sensor more often if the product is used in a location where there is a greater amount of dust.

① Open the dust sensor cover.

② Clean the dust sensor lens and the

inlet with a damp cotton swab.

x x With the exception of water, do not clean the sensor area with volatile substances, alcohol, acetone, etc.

Cotton swab

③ Wipe the moisture off with a dry

④ Close the dust sensor cover. x x The dust sensor cover can be cleaned with a vacuum cleaner.

Operating the air cleaner | Operation

4. Cleaning the exterior / Cleaning the interior

 Exterior Wipe the product with a soft cloth made wet with water mixed in with a neutral detergent, and then wipe it with a dry cloth.

x x Clean the air vent on the top cover with a vacuum cleaner or a duster around 1~2 times per month.

 Interior Open the top cover and clean with a vacuum cleaner.

x x Clean the interior with a vacuum cleaner or a duster around 1~2 times per month.

Troubleshooting

Problem

It does not turn on at all

Check / Measures

▶ ▶ Is the power cord securely attached to the socket on the back of the unit? Check both ends of the power cord to make sure it is plugged in and the power connections are secure.

▶ ▶ Is there a power outage? Check to see if other lights and electrical equipment are working and try again.

Itdoesn’tworkin Automatic mode.

▶ ▶ Is the power cord securely attached to the socket on the back of the unit? Try turning it on again after detaching and reattaching the power cord.

▶ ▶ Has Automatic mode been selected? Press the Mode button until Automatic mode is selected.

▶ ▶ Is the sensor blocked or clogged? Clear the sensor using a vacuum cleaner.

It vibrates and makes a lot of noise.

▶ ▶ Is it running on a slanted surface? Move the unit to a hard, flat area of the floor.

Problem

Check / Measures

The power plug and power outlet are hot.

▶ ▶ Is the power plug plugged in correctly? Plug in the power plug correctly.

There is a strange smell.

▶ ▶ Are you using it in a place with large amount of smoke, dust, or smell? The effects of air purifiers can be reduced if used in a place with large amount of smoke or smell. Please open a window and ventilate the room before using.

The wind speed is weak. The air does not get purified.

▶ ▶ Does the filter replacement alert pop-up window appear? A pop-up window will appear that informs you it is time to replace the filter from 1 month before the filter replacement time.

The display is dark.

▶ ▶ Is there any debris on the illumination level sensor window? Remove the debris from the illumination level sensor.

▶ ▶ Is it in sleep mode? If the indoor lighting becomes dark, the product will be automatically set to sleep mode and the display area will darken.

The Wi-Fi function does not work.

▶ ▶ Is the Wi-Fi turned off? Turn the Wi-Fi on.

Product Specifications | Other

Product Specifications

AC 120V, 60 Hz

Siutable for room sizes up to

21,1 inch (W) x 21,0 inch (D) x 44,8 inch (H)

Subject to technical modifications.

Made in South Korea

Safety instructions

• If the supply cord is damaged, it must be replaced by a special cord or assembly available from the manufacturer or its service agent.
• This appliance is not intended for use by person (including children) with reduced physical sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
• To reduce the risk of electric shock, this equipment has a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact qualified personnel to install the proper outlet. Do not alter the plug in any way.
• RISK OF ELECTRIC SHOCK – These servicing instructions are for use by qualified personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so.

01.04.2016 Date

Authorized representative for technical documentation

MBM Corporation 3134 Industry Drive North Charleston, SC 29418 800-223-2508 www.mbmcorp.com

Disposal Pass the outdated Air Purifier onto your specialized retailer for professional disposal. You can find out about further disposal possibilities from your municipality.

Spare parts and accessories You can purchase spare parts from specialized retailers. Only original parts from the manufacturer can be used.

Repairs All further repairs may only be carried out from professionals or the service department. This also applies to a faulty power cord. Through improper repairs, considerable danger for the operator can result and warranty claims lapse.

Guarantee agreements Thank you for choosing an IDEAL device. IDEAL grants a guarantee on its products. Warranty stipulations are determined by our national representation.

• If defects due to faulty materials and workmanship occur within this guarantee period, IDEAL will repair or replace the device at its expense.
• IDEAL will only repair or replace the device, if convincing proof is provided, for example by a receipt and if the claim is made within the guarantee period.
• The guarantee is not given on wearing parts or service parts like filter.
• The guarantee is not valid if the device was not set up, run and serviced right (as according to the devices manual)
• The guarantee is not valid if filters haven’t been replaced regularly with original IDEAL filters according to the description in the manual and/or the indication on the device itself.
• The guarantee is not valid if the device was connected to a power supply not matching the rating label on the machine.

For fresh air. For more health, vitality and quality of life. Perceptible. With every breathe you take.

IDEAL • 04-2016 / 12.05.2016 zm

• MBM Corporation • North Charleston • South Carolina • www.mbmcorp.com •