

Page 1 of 69

Text on page 2
Luftreiniger Air Purifier Purificateur
Page 2 of 69

Text on page 3
DE EN FR
Betriebsanleitung (2 - 23) Operating Instructions (24 – 45) Mode d´emploi (46 – 67)
Bestimmungsgemäßer Gebrauch Sicherheitshinweise Produkteigenschaften Lieferumfang Auspacken und Aufstellen Bedienung Inbetriebnahme / Lüfterstufen Bedienung Anzeige Luftqualitätsanzeige Filterwechselanzeige nur IDEAL AP 40 Pro: Fernbedienung (Bei der ersten Benutzung) Fernbedienung (Batterie austauschen) Fernbedienung (Funktion)
Filterwechsel App-Steuerung WLAN Reinigung und Pflege Zubehör Mögliche Störungen Technische Daten
Page 3 of 69

Text on page 4
Vorwort Vielen Dank, dass Sie sich für ein Gerät aus dem Hause IDEAL entschieden haben.
Bestimmungsgemäßer Gebrauch
- Das Gerät dient ausschließlich zur Reinigung der Raumluft in Innenräumen.
- Bitte lesen Sie vor Inbetriebnahme der Maschine unbedingt diese Betriebsanleitung und beachten Sie die Sicherheitshinweise. Die Betriebsanleitung muss jederzeit verfügbar sein.
Sicherheitshinweise
- Halten Sie Verpackungsmaterial, wie z. B. Folie von Kindern fern! (Erstickungsgefahr)
- Befolgen Sie bitte diese Sicherheitsanweisungen, um das Risiko eines Feuers oder elektrischen Schlags zu vermeiden. Benutzen Sie das Gerät nur in Innenräumen.
- Verwenden Sie ausschließlich eine Steckdose mit der angegebenen Spannung (siehe Typenschild).
- Nehmen Sie keine Änderungen oder Reparaturen am Gerät vor.
- Verwenden Sie das Gerät auf keinen Fall, wenn das Netzkabel oder der Netzstecker beschädigt ist, oder wenn der Anschluss an der Wandsteckdose instabil ist.
- Achten Sie darauf, dass im Betrieb das Netzkabel nicht eingeklemmt ist, oder anderweitig beschädigt werden kann. Verlegen Sie es so, dass niemand darüber stolpern kann. Belasten Sie das Netzkabel nicht auf Zug.
- Nehmen Sie im Falle einer längeren Nichtverwendung oder zum Reinigen den Stecker aus der Wandsteckdose.
- Fassen Sie den Stecker oder das Gerät nicht mit nassen Händen an.
- Bitte kein Insektenschutzmittel versprühen.
- Benutzen Sie das Gerät nicht in Räumen, in denen die Luft Brennstoffdampf, Öldampf oder Metallstaub enthalten kann.
- Verwenden Sie zum Reinigen keine leicht flüchtigen Flüssigkeiten, Benzin, Kerosin, Farbverdünner oder Polierpaste. Diese könnten die Geräteoberfläche beschädigen.
- Setzen Sie das Gerät auf keinen Fall Regen, Wasser, Nässe oder hoher Luftfeuchtigkeit aus, stellen Sie es nicht im Badezimmer oder in der Küche neben einem Wasch- oder Spülbecken auf.
- Es dürfen keine Fremdkörper in die Auslassgitter gelangen.
- Offenes Feuer und Funken sind zu vermeiden.
- Für die Beseitigung schädlicher Gase (Kohlenmonoxid, z.B. von Brennheizungungsanlagen) ist das Gerät nicht geeignet.
- Das Gerät darf nicht von Personen (einschließlich Kindern) mit reduzierten körperlichen, sensorischen oder geistigen Fähigkeiten oder fehlender Erfahrung und Kenntnis bedient werden, es sei denn, sie werden überwacht oder beaufsichtigt.
Page 4 of 69

Text on page 5
Sicherheitshinweise
- Blockieren Sie den Luftein- und Luftauslass nicht.
- Setzen Sie den Luftreiniger nicht direktem Sonnenlicht, offenem Feuer oder Wärme aus.
- Den Luftreiniger nur in Wohnräumen und innerhalb der spezifizierten technischen Daten verwenden. Ein nicht bestimmungsgemäßer Gebrauch kann Gesundheit und Leben gefährden.
- Das Gerät nicht in der Nähe eines Rauchmelders verwenden. Wenn die Luft in Richtung eines Rauchmelders bläst, könnte der Alarm verspätet oder überhaupt nicht ausgelöst werden.
Achtung Verletzungsgefahr durch elektrischen Schlag. Immer Netzstecker ziehen vor:
- Pflegen und Reinigen
- Umstellen des Geräts
- Filterwechsel
Achtung
- In der Nähe des Luftreinigers keine Spraydosen mit entzündbaren Stoffen benutzen!
Achtung
- Keine entzündbaren Reinigungsmittel verwenden.
Page 5 of 69

Text on page 6
- Filterwechsel-Anzeige: Der Luftreiniger zeigt mit Hilfe einer orange blinkenden Schalt-Taste (EASY-Touch) an, dass die Filterpatrone gewechselt werden muss.
- Luftreinigung in 5 Leistungsstufen
- Luftreinigungssystem in 3 Stufen: Vorfilter, HEPA-Filter mit Aktivkohle beschichtet
- 360°- Smartfilter (Filterpatrone: Vorfilter, HEPA + Aktivkohle) Einfache Pflege und Wechsel der Filterpatrone.
Luftreiniger (Gerätekopf)
Filterpatrone
- Vorfilter
- Hepa-Filter mit Aktivkohle beschichtet
Luftreiniger Air Purifier Purificateur
Fernbedienung
- mit 3V Lithium Batterie (nur IDEAL AP40 Pro)
Gedruckte Betriebsanleitung
Premium Textilüberzug
- mit Klettverschluss (nur IDEAL AP40 Pro)
Page 6 of 69

Text on page 7
Richtlinien zur Installation für optimale Funktion:
- Stellen Sie das Gerät mindestens 10 cm von der Wand entfernt auf.
- Vermeiden Sie Aufstellungsorte, an denen sich das Gerät im direkten Luftstrom (Wind) befindet.
- Meiden Sie Aufstellungen an denen Möbel, Textilien oder andere Gegenstände mit dem Luftein- bzw. Luftauslass in Kontakt kommen oder diesen blockieren können.
- Stellen Sie das Gerät auf einer stabilen und ebenen Oberfläche auf und achten Sie auf eine ausreichende Luftzirkulation.
Netzkabel (1.), Betriebsanleitung (2.), Fernbedienung (3. nur IDEAL AP40 Pro) und Textilüberzug (4. nur IDEAL AP40 Pro) entnehmen.
Filterpatrone aus dem Karton heben, auspacken und Schutzfolie entfernen.
Luftreiniger (Gerätekopf) herausnehmen und auspacken.
Page 7 of 69

Text on page 8
Textilüberzug (nur IDEAL AP40 Pro) aus der Schutzfolie herausnehmen, um die Filterpatrone herum anlegen und an der Rückseite (Verschlussteil A) verschließen.
Filterpatrone mit den drei Rastnasen in die dafür vorgesehenen drei Aussparungen einsetzen und am Verschlussteil (A) verriegeln .
Netzkabel zuerst am Gerät, dann an der Steckdose einstecken. Wenn die Filterpatrone fehlt oder nicht korrekt montiert ist, blinkt die Schalt-Taste (B) rot und der Luftreiniger läuft nicht.
Hinweis: Verwenden Sie die Originalverpackung zum Lagern, wenn Sie den Luftreiniger nicht ganzjährig benutzen. Zum Schutz der Aktivkohle bitte Filterpatrone luftdicht verpacken und lagern.
Sicherheitshinweis Das Betreiben des Luftreinigers ohne vollständig und fest angebrachte Verkleidungen und Schutzabdeckungen (Motor Schutzgitter, Filterpatrone, etc.) ist nicht zulässig.
Page 8 of 69

Text on page 9
- Netzkabel einstecken, Schalt-Taste (B) antippen. Der Luftreiniger startet im Automatikmodus . Die Schalt-Taste leuchtet.
- Durch Antippen der Schalt-Taste verlassen Sie den Automatikmodus. Der Luftreiniger läuft nun auf Lüfterstufe 1 . Die Schalt-Taste blinkt 1-mal.
- Durch erneutes Antippen wird die Lüfterstufe auf 2 erhöht. Die Schalt- Taste blinkt 2-mal. Ein weiteres Drücken erhöht die Lüfterstufe auf 3 (blinkt 3-mal) bzw. auf die Turbolüfterstufe T (blinkt 4-mal).
- Tippen Sie erneut die Schalt-Taste an, wechselt der Luftreiniger in die Quiet-Funktion . Die Schalt-Taste leuchtet schwach.
Die Quiet-Funktion ist für einen besonders leisen und unauffälligen Betrieb vorgesehen (z. B. Schlafzimmer). Der Luftreiniger schaltet auf die kleinste Lüfterstufe.
- Bei erneutem Antippen der Schalt-Taste läuft der Luftreiniger wieder im Automatikmodus .
Hinweis: Durch Drücken und gedrückt halten der Schalt-Taste, kann der Luftreiniger ausgeschaltet werden. Ein Antippen schaltet das Gerät wieder ein.
Page 9 of 69

Text on page 10
Die Luftqualität wird in 3 Farben angezeigt (in allen Lüfterstufen):
Schalt-Taste (B) grün: Schalt-Taste gelb: Schalt-Taste rot:
gute Luftqualität mittlere Luftqualität schlechte Luftqualität
Ein notwendiger Filterwechsel wird durch die orange blinkende Schalt-Taste (B) angezeigt (blinkt in Intervallen).
- Die zu erwartende Lebensdauer der Filterpatrone beträgt ca. 1 Jahr (je nach Lauf- und Reinigungsleistung).
- Werden Gerüche nicht mehr herausgefiltert, bzw. produziert der Filter unangenehme Gerüche, sollte die Filterpatrone früher ausgetauscht werden.
- Verwenden Sie nur original IDEAL-Filterpatronen. Das Gerät funktioniert nur mit einer original IDEAL-Filterpatrone.
Hinweis: Wenn die Filterpatrone fehlt oder nicht korrekt montiert ist, blinkt die Schalt-Taste rot und der Luftreiniger läuft nicht.
Page 10 of 69

Text on page 11
Fernbedienung (nur IDEAL AP40 Pro)
Batteriegebrauch
- Benutzen Sie für die Fernbedienung immer 3V Lithium Batterien CR2025.
- Inkorrekter Batteriegebrauch kann zu auslaufender Batterieflüssigkeit und/oder Schäden führen.
- Wenn die Fernbedienung über einen längeren Zeitraum hinweg nicht benutzt wird, entfernen Sie bitte die Batterie.
Ungeeignete Platzierung
- Es sollten sich während der Bedienung keine Objekte oder Möbel zwischen Fernbedienung und Luftreiniger befinden.
- Der Luftreiniger sollte nicht in direkter Sonneneinstrahlung platziert werden. Der Infrarotempfänger kann dadurch beeinträchtigt werden.
- Plätze, an denen Leuchtstoffröhren, aufgrund defekter/alter Röhren, flackern.
- Bewahren Sie die Fernbedienung nicht in direktem Sonnenlicht und/oder in der Nähe von Heizungen/Heizgeräten auf.
Bei der ersten Benutzung Die Fernbedienung hat eine vorinstallierte Lithium-Batterie CR2025. Die Schutzlasche 8h entfernen, um die Batterie in der Fernbedienung 4h 2h zu aktivieren. 1h
Korrekte Handhabung
- Mit der Fernbedienung auf den Luftreiniger (Schalt-Taste B) zeigen.
Page 11 of 69

Text on page 12
Fernbedienung (nur IDEAL AP40 Pro)
CR 3V
Batterie austauschen
- Öffnen Sie das Batteriefach durch Drücken (A) und gleichzeitiges Herausziehen (B). Leere Batterie herausnehmen.
- Eine neue Batterie in das Batteriefach einlegen und dabei auf die angegebene Polarität achten (+ / -).
- Benutzen Sie bitte immer 3V Lithium Batterien CR2025.
- Das Batteriefach wieder in den Sitz einschieben (C).
Wichtige Hinweise zu Batterien und deren Entsorgung Batterien gehören NICHT in den Hausmüll. Als Verbraucher sind Sie gesetzlich verpflichtet, gebrauchte Batterien zur fachgerechten Entsorgung zurückzugeben. Sie können Ihre Batterien bei den öffentlichen Sammelstellen in Ihrer Gemeinde abgeben oder überall dort, wo Batterien der gleichen Art verkauft werden.
- Achten Sie unbedingt auf die richtige Polarität der Batterien. Falsch eingesetzte Batterien können zur Zerstörung des Gerätes führen – Brandgefahr.
- Versuchen Sie nicht, Batterien zu öffnen oder in irgendeiner Weise zu beschädigen und werfen Sie Batterien nicht ins Feuer.
- Batterien, aus denen Flüssigkeit austritt, sind gefährlich. Berühren Sie diese nur mit geeigneten Handschuhen.
- Batterien gehören nicht in die Hände von Kindern.
- Nehmen Sie die Batterien aus dem Gerät, wenn Sie es für längere Zeit nicht benutzen.
Page 12 of 69

Text on page 13
Fernbedienung (nur IDEAL AP40 Pro)
Schaltet den Luftreiniger auf Automatikmodus
Schaltet den Luftreiniger Ein/Aus
Schaltet den Luftreiniger in den Quiet-Modus
kann direkt angewählt werden. Die gewünschte Timer-Zeit Wird der Timer bei eingeschaltetem Luftreiniger gedrückt, aktiviert sich der "Ausschalt-Timer" nach der eingestellten Zeit schaltet sich der Luftreiniger aus. Wird die Timer-Taste bei ausgeschaltetem Luftreiniger gedrückt, aktiviert sich der "Einschalt-Timer" nach der eingestellten Zeit schaltet sich der Luftreiniger ein. Visualisierung nur in der App (Smartphone / Tablet).
kann direkt angewählt werden.
ist die Schalt-Taste des Luftreinigers Nach Betätigen der Verriegelungstaste gesperrt. Ein erneutes Drücken der Verriegelungstaste hebt die Sperrung auf. Außerdem kann die Sperrung aufgehoben werden, indem der Luftreiniger vom Netz getrennt wird.
Hinweis: Bei Betätigung der Fernbedienung leuchtet als Empfangsbestätigung die Schalt-Taste am Luftreiniger für ca. 1 Sekunde weiß auf. Wird bei aktivierter Verriegelungsfunktion die Schalt-Taste des Luftreinigers betätigt, leuchtet diese kurz rot auf.
Page 13 of 69

Text on page 14
Filterwechsel (z. B. nach Aufleuchten der Filterwechselanzeige, siehe Seite 9)
Hinweis: Es können nur original IDEAL-Filterpatronen (Bestellung unter www.ideal.de) verwendet werden. Die Filterpatrone kann ohne Werkzeug ausgetauscht werden.
ACHTUNG!
Netzstecker aus der Steckdose ziehen. Luftreiniger auf den Kopf stellen. Netzstecker am Gerät abziehen.
Filterpatrone am Verschlussteil (A) entriegeln und abnehmen.
Textilüberzug (nur IDEAL AP40 Pro) abnehmen. Schutzfolie von der neuen Filterpatrone entfernen.
Page 14 of 69

Text on page 15
Textilüberzug (nur IDEAL AP40 Pro) an der Filterpatrone wieder anlegen und an der Rückseite (Verschlussteil A) verschließen.
Filterpatrone mit den drei Rastnasen in die dafür vorgesehenen drei Aussparungen einsetzen und am Verschlussteil (A) verriegeln .
Netzkabel zuerst am Gerät, dann an der Steckdose einstecken. Das Gerät funktioniert nur, wenn die Filterpatrone korrekt montiert ist.
Hinweis: Der Luftreiniger erkennt selbständig, dass eine neue IDEAL-Filterpatrone eingesetzt wurde und stellt die Filterwechselanzeige automatisch zurück.
Best. Nr. 7310 099
Page 15 of 69

Text on page 16
Ihr Luftreiniger kann zusätzlich auch mit der "IDEALAIRPRO" - App über Ihr Smartphone / Tablet gesteuert werden (iOS / Android).
WLAN
WLAN-Status abfragen:
Der Luftreiniger ist eingeschaltet. WLAN-Taste antippen das WLAN ist aktiviert, wenn die Schalt-Taste blau blinkt das WLAN ist deaktiviert, wenn die Schalt-Taste weiß blinkt.
WLAN aktivieren / deaktivieren
Der Luftreiniger ist eingeschaltet. WLAN-Taste antippen und während dem blinken (Schalt-Taste, blau oder weiß), die WLAN-Taste nochmals antippen, um das WLAN zu aktivieren bzw. zu deaktivieren.
WLAN zurücksetzen:
Der Luftreiniger ist eingeschaltet. WLAN ist aktiviert. Schalt-Taste drücken und gedrückt halten und gleichzeitig WLAN-Taste drücken und gedrückt halten, bis die Schalt-Taste pink blinkt.
Page 16 of 69

Text on page 17
Reinigung und Pflege / Zubehör
ACHTUNG: Vor Reinigungs- und Pflegearbeiten den Netzstecker ziehen!
- Wechseln Sie die Filterpatrone sobald die Filterwechselanzeige (Seite 9) aufleuchtet. Die durchschnittliche Filterlebensdauer beträgt ca. 1 Jahr (je nach Lauf- und Reinigungsleistung).
- Reinigen Sie das Gehäuse des Luftreinigers mit einem mit Seifenlösung angefeuchteten, fusselfreien Tuch.
- Reinigen Sie den Vorfilter der Filterpatrone mit einem Staubsauger.
- Verwenden Sie keine Lösungsmittel. Diese könnten die Gehäuseoberfläche angreifen.
- Schützen Sie den Luftreiniger vor Wasser.
- Vermeiden Sie die Verwendung von silikonhaltigen Stoffen, da hierdurch der Luftqualitätssensor zerstört werden könnte.
- Vermeiden Sie es, die Wirkung des Luftqualitätssensors mit stark dosierten Gasen, oder Alkoholen zu testen, da der Luftqualitätssensor dadurch zerstört werden könnte.
- Reinigen Sie den Textilüberzug mit einem Staubsauger.
- Bei Bedarf kann der Textilüberzug auch per Handwäsche gereinigt werden (beachten Sie dazu die Pflegehinweise auf dem Etikett).
Zubehör können Sie über Ihren Fachhändler oder unter www.ideal.de beziehen.
Best. Nr. 7310 108
Best. Nr. 7310 099
Page 17 of 69

Text on page 18
Luftreiniger lässt sich nicht einschalten.
Ist das Netzkabel an der Rückseite des Gerätes sicher angeschlossen?
Stellen Sie sicher, dass das Netzkabel keine Beschädigungen aufweist. Überprüfen Sie beide Enden des Netzkabels. Stellen Sie sicher, dass diese eingesteckt sind und eine Stromverbindung hergestellt ist (Seite 7).
Ist eine original IDEAL-Filterpatrone eingesetzt? Ist die Filterpatrone auch korrekt eingesetzt?
Stellen Sie sicher, dass eine original IDEAL-Filterpatrone eingesetzt ist. Stellen Sie sicher, dass die Filterpatrone mit allen 3 Rastnasen eingerastet und ganz verriegelt ist (Seite 7).
Die Schalt-Taste des Luftreinigers funktioniert nicht.
Die Tasten der Fernbedienung funktionieren nicht (nur IDEAL AP40 Pro).
Ist die Verriegelungsfunktion aktiviert?
Deaktivieren Sie die Verriegelungsfunktion an der Fernbedienung (nur IDEAL AP40 Pro) oder über die App (Funktion F Seite 12). Netzkabel einmal aus- und dann wieder einstecken.
Ist die Batterie der Fernbedienung nicht eingelegt? Oder leer?
Überprüfen Sie die Batterie (3V Lithium CR2025).
Mit der Fernbedienung auf den Luftreiniger zeigen (Seite 10). Nach dem Anschließen des Netzkabels oder einem Filterwechsel ist die Funktion der Fernbedienung für ca. 10 Sekunden gesperrt.
Page 18 of 69

Text on page 19
Die Schalt-Taste leuchtet schwach oder gar nicht.
Ist der Luftreiniger eingeschaltet?
Luftreiniger durch Betätigen der Schalt- Taste (Seite 8) einschalten.
Ist die Quiet-Funktion aktiviert?
Tippen Sie die Schalt-Taste einmal an, der Luftreiniger schaltet weiter in den Automatikmodus. Deaktivieren Sie die Quiet-Funktion durch Anwählen einer anderen Lüfterstufe über die App bzw. an der Fernbedienung (nur IDEAL AP40 Pro).
Der Automatikmodus funktioniert nicht ordnungsgemäß.
Der Luftreiniger kalibriert den Luftqualitätssensor. Dies geschieht beim ersten Einschalten und nach jeder Netztrennung.
Warten Sie bis der Kalibriervorgang abgeschlossen ist (kann einige Minuten dauern)
Der Luftqualitätssensor erkennt die Luftqualität nicht zuverlässig.
Kalibrieren Sie den Luftqualitätssensor durch kurze Netztrennung neu!
Gerüche werden schlecht gefiltert.
Ist der Luftreiniger permanent starken Gerüchen ausgesetzt?
Ein Filterwechsel (Seite 13-14) ist notwendig, da der Aktivkohlefilter gesättigt ist und eine zuverlässige Luftreinigung dadurch nicht mehr gewährleistet ist.
Werden die Gerüche überhaupt eingezogen?
Platzieren Sie den Luftreiniger näher an die Geruchsquelle. Schalten Sie den Luftreiniger manuell auf eine höhere Lüfterstufe (Seite 8).
Page 19 of 69

Text on page 20
Der Luftreiniger macht laute Geräusche.
Ist die Filterpatrone stark verschmutzt?
Reinigen Sie den Vorfilter mit einem Staubsauger.
Befindet sich der Luftreiniger auf einer unebenen Oberfläche?
Stellen Sie das Gerät auf eine ebene Oberfläche.
Befindet sich der Luftreiniger in einer hohen Lüfterstufe?
Stellen Sie mit der Schalt-Taste eine kleinere Lüfterstufe ein.
Hilft keine der vorher genannten Problemlösungen? Kontakt: Service
- www.krug-priester.com
- service@krug-priester.com
Page 20 of 69

Text on page 21
IDEAL AP30 Pro:
200-240V 50/60Hz / 100-120V 50/60Hz 30W (200-240V) / 25W (100-120V)
20 bis 40 m² *
Abmessungen (L × B × H)
298 × 255 × 398 mm
IDEAL AP40 Pro:
200-240V 50/60Hz / 100-120V 50/60Hz 75W (200-240V) / 55W (100-120V)
30 bis 50 m² *
Abmessungen (L × B × H)
298 × 255 × 398 mm
- Bei einer Raumhöhe von 2,50 m
Page 21 of 69

Text on page 22
Garantiebestimmungen IDEAL übernimmt für dieses Gerät eine Garantie ab Verkaufsdatum. Die Garantiebestimmungen sind von unserer Landesvertretung festgelegt.
- Falls innerhalb des Garantiezeitraums ein Material oder Konstruktionsfehler auftritt, wird IDEAL nach eigenem Ermessen das Gerät reparieren, ersetzen oder den Einkaufspreis des Gerätes erstatten.
- Die Garantieleistung kann nur erfolgen, wenn ausreichende Nachweise, wie z.B. eine Kaufquittung vorgelegt werden und der Garantieanspruch innerhalb des Garantiezeitraums geltend gemacht wird.
- Die Garantie erstreckt sich nicht auf Verschleißteile und nicht auf die regelmäßig zu erneuernden Teile.
- Die Garantie verfällt, wenn das Gerät nicht sachgemäß (entsprechend der Betriebsanleitung) aufgestellt, eingesetzt und gereinigt/gepflegt wird.
- Die Garantie verfällt, wenn das Gerät an eine nicht dem Typenschild entsprechende Stromversorgung angeschlossen wird.
Lagern Luftreiniger vorzugsweise in der Originalverpackung an einem trockenen, nicht zu heissen Ort aufbewahren. Zum Schutz der Aktivkohle bitte Filterpatrone luftdicht verpacken und lagern.
Ersatzteile und Zubehör Ersatzteile können Sie über Ihren Fachhändler oder unter www.ideal.de beziehen. Es dürfen nur Originalteile des Herstellers verwendet werden.
Reparatur Reparaturen dürfen nur Fachkräfte oder der Kundendienst durchführen. Dies gilt auch für ein defektes Netzkabel. Durch unsachgemässe Reparaturen können erhebliche Gefahren für den Benutzer entstehen und der Garantieanspruch erlischt.
Entsorgung Dieses Gerät darf nicht mit dem Hausmüll entsorgt werden! Bitte geben sie dieses Gerät an den dafür vorgesehenen Sammelstellen ab! Das Sammeln und Recyceln elektrischen und elektronischen Abfalls schont wertvolle Ressourcen! Das Verpackungsmaterial ist wieder verwertbar. Entsorgen Sie die Verpackung umweltgerecht und führen Sie sie der Wertstoffsammlung zu. Danke!
Page 22 of 69

Text on page 23
Das Unternehmen Krug + Priester hat folgende Zertifizierungen:
- Qualitätsmanagementsystem nach DIN EN ISO 9001:2015
- Umweltmanagementsystem nach DIN EN ISO 14001:2009
- Energiemanagementsystem nach DIN EN ISO 50001:2011
Page 23 of 69

Text on page 24
Diese Maschine ist GS-geprüft und entspricht den folgenden EG-Richtlinien:
- 2014/35/EU für elektrische Sicherheit
- 2014/30/EU für elektromagnetische Verträglichkeit.
- 2011/65/EU RoHS.
Die spezifischen technischen Daten entnehmen Sie bitte den Angaben auf dem Typenschild der Maschine. Für die Inanspruchnahme einer Garantieleistung muss das Gerät durch das Typenschild zu identifizieren sein. Technische Änderungen vorbehalten.
EG-KONFORMITÄTSERKLÄRUNG
- Hiermit erklären wir, daß die Bauart von
GS-IDENT. Nr. IDEAL AP30 Pro Made in Germany 11731002 IDEAL AP40 Pro Made in Germany 11731001
UL-IDENT. Nr. 10731002 10731001
- folgenden einschlägigen Bestimmungen entspricht
2014/35/EU Niederspannungsrichtlinie
2011/65/EU RoHS Richtlinie
2014/30/EG EMV-Richtlinie
- Angewendete harmonisierte Normen insbesondere
IEC 61000-3-2; IEC 61000-3-3; EN 61000-3-2; EN 61000-3-3; EN 60335-2-65; EN 60335-1; EN ISO 13857; EN 55014-1; EN 55014-2
01.02.2018 Datum
Bevollmächtigter für technische Dokumentation
Krug & Priester GmbH & Co KG Simon-Schweitzer-Str. 34 D-72336 Balingen (Germany)
Page 24 of 69

Text on page 25
EN Operating Instructions (24 – 45)
Intended use Safety instructions Product features Included in the box Unpacking and setting up Operation Startup / Fan speeds Operation Display Air quality indicator Filter replacement indicator
only IDEAL AP 40 Pro: Remote control (when using for the first time) Remote control (replacing the battery) Remote control (function)
Changing the filter App Control WLAN Cleaning and maintenance Accessories Troubleshooting Technical data
Page 25 of 69

Text on page 26
Introduction Thank you for choosing a device from IDEAL.
Intended use
- The device is used exclusively for cleaning the ambient air indoors.
- Please read these operating instructions before starting to use the device and please follow the safety instructions. The operating instructions must be kept available with the device at all times.
Safety instructions
- Keep packing material, such as plastic wrapping, away from children! (Risk of suffocation)
- Please follow the safety instructions to prevent fire or electric shock. Only use the device indoors.
- Only use a wall socket that supplies the correct voltage (see rating plate).
- Do not modify or repair the device.
- Do not use the device if the power cable or mains plug is damaged or if the connection at the wall socket is not stable.
- Make sure that the power cable does not get crushed while you are using the device and that it cannot be damaged in any other way. Place the cable so that no one will trip over it. Do not place the power cable under strain.
- Disconnect the plug from the wall socket for cleaning purposes and whenever the device is not in use for a significant period of time.
- Do not touch the plug or the device if you have wet hands.
- Do not spray any insect repellent.
- Do not use in rooms where the device may come into contact with fuel vapour or metal dust.
- Do not use any volatile liquids, petroleum, kerosene, paint thinner or polishing paste to clean the device. Such liquids may damage the surface of the device.
- Do not expose the device to rain, water, moisture or high humidity, and do not set it up in a bathroom or kitchen next to a sink.
- Make sure that no foreign objects get into the outlet grilles.
- Do not use near an open fire or sparks.
- The device is not suitable for removing harmful gases (carbon monoxide, e.g. from heating appliances).
- The appliance is not to be used by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction.
- Children being supervised not to play with the appliance.
Page 26 of 69

Text on page 27
Safety instructions
- Do not block the air intake and outlet.
- Keep this air purifier away from direct sunlight, naked flames or heat.
- Only use the air purifier in living spaces and within the specified technical parameters. Improper usage may pose a threat to life and health.
- Do not use the unit near a fire alarm. If the outlet air is blowing towards a fire alarm, the alarm may respond late or not at all.
Caution Risk of injury due to electric shock. Always disconnect the mains plug prior to:
- Carrying out maintenance work or cleaning
- Moving the device
- Changing the filter
Danger
- Do not use any spray cans with flammable content near to the Air Purifier!
Danger
- Do not use any flammable cleaning agents.
Page 27 of 69

Text on page 28
Product features / Included in the box
- Filter replacement indicator: The air purifier indicates that the filter cartridge needs to be changed via a switch button (EASY touch) which flashes orange.
- Air purification in 5 speed settings
- 3-stage air purification system: Pre-filter, HEPA filter coated with activated carbon
- 360° filter (Pre-filter, HEPA + active carbon) Easy maintenance and replacement of the filter cartridge.
Included in the box
Air Purifier (Unit head)
Filter cartridge
- Pre-filter
- HEPA filter coated with activated carbon
Luftreiniger Air Purifier Purificateur
Remote control
- With 3V lithium battery (only IDEAL AP40 Pro)
Printed operating instructions
Premium textile cover
- with Velcro fastener (only IDEAL AP40 Pro)
Page 28 of 69

Text on page 29
Unpacking and setting up
Installation guidelines for optimum performance:
- Place the device at least 10 cm away from the wall.
- Keep the device away from areas subjected to draft (wind).
- Make sure that furniture, fabrics or other objects do not come in contact with the air intake/outlet or block them.
- Place the device on a stable, even surface and make sure there is sufficient air circulation.
Remove power cable (1.), operating instructions (2.), remote control (3. only IDEAL AP40 Pro) and textile cover (4. only IDEAL AP40 Pro).
Lift the filter cartridge out of the box, unpack it and remove the protective film.
Remove the air purifier (unit head) and unpack.
Page 29 of 69

Text on page 30
Unpacking and setting up
Take the textile cover (only IDEAL AP40 Pro) out of the protective film, place it around the filter cartridge and close it at the back (locking component A).
Insert the filter cartridge with the three snap-fit tabs into the three recesses provided for this and lock it at the locking component (A) .
Connect the power cable to the device first, then to the socket. If the filter cartridge is missing or not installed correctly, the switch button (B) flashes red and the air purifier will not work.
Note: Use the original packaging to store the air purifier if you are not using it all year round. Pack and store the filter cartridge airtight to protect the activated carbon.
Safety information No operation of the air purifier without the complete and secure attachment of the cladding and safety covers (Motor protection grille, filter cartridge, etc.).
Page 30 of 69

Text on page 31
Startup / Fan speeds
- Plug in the power cable, press the switch button (B). The air purifier starts in automatic mode . The switch button lights up.
- Press the switch button to exit automatic mode. The air purifier now runs at fan speed 1 . The switch button flashes once.
- Press again to increase the fan speed to 2 . The switch button flashes twice. Press again to increase the fan speed to 3 (flashes 3 times) or to the turbofan speed T (flashes 4 times).
- If you press the switch button again, the air purifier switches to the Quiet function . The switch button lights up, but only dimly.
The Quiet function is provided for particularly low-noise, unobtrusive operation (e.g. bedrooms). The air purifier switches to the lowest fan speed.
- When the switch button is pressed again, the air purifier returns to automatic mode .
Note: The air purifier can be switched off by pressing and holding down the switch button. Just press it to switch the device back on.
Page 31 of 69

Text on page 32
The air quality is displayed in 3 colours (in all fan speeds):
Switch button (B) green: good air quality Switch button yellow: average air quality Switch button red: poor air quality
The switch button (B) flashes orange to indicate that the filter needs changing (flashes at intervals).
- The life expectancy of the filter is approx. 1 year (depending on operation and purification activities).
- If odours are no longer being filtered out, or if the filter produces unpleasant odours, then the filter cartridge needs to be replaced sooner.
- Only use original IDEAL filter cartridge. The device will only function with an original IDEAL filter cartridge.
Note: If the filter cartridge is missing or not installed correctly, the switch button flashes red and the air purifier will not work.
Page 32 of 69

Text on page 33
Remote control (only IDEAL AP40 Pro)
Battery usage
- Always use 3V lithium batteries CR2025 for the remote control.
- Incorrect battery usage may result in leakage of battery fluid and/or damage.
- If the remote control is not going to be used for a long time, please remove the battery.
Unsuitable location
- Make sure that no objects or furnishings are situated between the remote control and the air purifier.
- The air purifier should not be placed in direct sunlight. This could impair the infrared sensor.
- Locations where fluorescent tubes are flickering because they are defective or old.
- Do not store the remote control in direct sunlight and/or close to radiators/heaters.
When using for the first time
The remote control has a pre-installed lithium h battery CR2025. Remove the protective flap to 4h activate the remote control battery. 2h
rb Tu
How to use correctly
- Point the remote control at the air purifier (switch button B).
Page 33 of 69

Text on page 34
Remote control (only IDEAL AP40 Pro)
CR 3V
Replacing the battery
- Open the battery compartment by pressing
- and pulling out (B) at the same time.
Take out the flat battery.
- Insert a new battery into the battery compartment, making sure the polarity is correct (+ / -).
- Always use 3V lithium batteries CR2025.
- Slide the battery compartment back into its seating (C).
Important information about the batteries and how to dispose of them Batteries must NOT be disposed of with household waste. As the user, you are legally obligated to return used batteries for proper disposal. You can hand in your batteries at public collection points in your community or wherever the same type of batteries are sold.
- It is very important that you make sure that the polarity of the batteries is correct. Wrongly inserted batteries could destroy the device – a fire hazard.
- Do not try to open or damage batteries and do not throw batteries into a fire.
- Batteries that are leaking fluid are dangerous. Only touch these with suitable gloves.
- Keep batteries out of the reach of children.
- Take the batteries out of the device if you are not going to be using it for a significant period of time.
Page 34 of 69

Text on page 35
Remote control (only IDEAL AP40 Pro)
A Fan speed buttons
Select the required fan speed
Switches the air purifier to automatic mode
Switches the air purifier on/off
Switches the air purifier to Quiet mode
Select the required timer time . Pressing the timer while the air purifier is switched on activates the "switch-off timer" after the set time, the air purifier switches off. Pressing the timer button while the air purifier is switched off activates the "switch-on timer" after the set time, the air purifier switches on. Visualisation only in the app (smartphone / tablet).
to lock the air purifier switch button. Press the locking button Press the locking button again to unlock. It can also be unlocked by disconnecting the air purifier from the mains.
Note: When the remote control is operated, the switch button on the air purifier lights up white for approx. 1 second in acknowledgement. If you press the air purifier switch button when the locking function is activated, it lights up briefly in red.
Page 35 of 69

Text on page 36
Filter replacement (e.g. in accordance with the filter replacement indicator, see page 31)
Note: Only original IDEAL filter cartridges (order from www.ideal.de) may be used. No tools are required to replace the filter cartridge.
CAUTION!
Take the mains plug out of the socket. Turn the air purifier upside down. Pull the mains plug out of the device.
Unlock the filter cartridge at the locking component (A) and remove.
Remove the textile cover (only IDEAL AP40 Pro).
Remove the protective film from the new filter cartridge.
Page 36 of 69

Text on page 37
Put the textile cover (only IDEAL AP40 Pro) back on the filter cartridge and close it at the back (locking component A).
Insert the filter cartridge with the three snap-fit tabs into the three recesses provided for this and lock it at the locking component (A) .
Connect the power cable to the device first, then to the socket. The device will only work if the filter cartridge is installed correctly.
Note: The air purifier automatically detects that a new IDEAL filter cartridge has been inserted and automatically resets the filter replacement indicator.
Order no. 7310 099
Page 37 of 69

Text on page 38
App Control / WLAN
Your purifier can additionally be controlled by the "IDEALAIRPRO" App via your smartphone / tablet (iOS /Android).
WLAN
Querying the WLAN status:
The air purifier is switched on. Press the WLAN button the WLAN is enabled when the switch button flashes blue the WLAN is disabled when the switch button flashes white.
The air purifier is switched on. Press the WLAN button and while the switch button is flashing (blue or white), press the WLAN button again to enable or disable the WLAN.
Resetting the WLAN:
The air purifier is switched on. WLAN is enabled. Press and hold down the switch button and the WLAN button at the same time until the switch button flashes pink.
Page 38 of 69

Text on page 39
Cleaning and maintenance / Accessories
CAUTION: Disconnect the mains plug prior to any cleaning or maintenance work!
- Replace the filter cartridge as soon as the filter replacement indicator (page 31) lights up. The average life expectancy of the filter is approx. 1 year (depending on operation and purification activities).
- Clean the air purifier housing with a lint-free cloth moistened with soapy water.
- Clean the filter cartridge’s pre-filter with a vacuum cleaner.
- Do not use any solvents. These could damage the housing surface.
- Protect the air purifier from water.
- Do not use any substances containing silicone, since this could destroy the air quality sensor.
- Do not test the effectiveness of the air quality sensor with high quantities of gas, or alcohol, since this could destroy the air quality sensor.
- Clean the textile cover with a vacuum cleaner.
- If necessary, the textile cover can also be washed by hand (please refer to the care instructions on the label).
You can source accessories via your dealer or at www.ideal.de.
Order no. 7310 108
Order no. 7310 099
Page 39 of 69

Text on page 40
The air purifier won’t switch on.
Is the power cable securely connected to the back of the device?
Make sure that the power cable is not damaged in any way Check both ends of the power cable. Make sure that these are plugged in and that the purifier is connected to the power supply (page 29).
Is an original IDEAL filter cartridge installed? Is the filter cartridge also inserted correctly?
Make sure that an original IDEAL filter cartridge is inserted. Make sure that the filter cartridge is clicked in place with all 3 tabs and is fully locked (page 29).
The switch button on the air purifier is not working.
Has the locking function been activated?
The buttons on the remote control do not work. (only IDEAL AP40 Pro).
Is the battery in the remote control? Or is it flat?
Disable the locking function on the remote control (only IDEAL AP40 Pro) or via the app (Function F Page 34). Unplug the power cable and then plug it back in.
Check the battery (3V lithium CR2025).
Are you using it correctly?
Point the remote control at the air purifier (page 32). Having joined the power cord or exchanged the filter, the function of the remote control is blocked for about 10 seconds.
Page 40 of 69

Text on page 41
The switch button is lit up only dimly or not lit up at all.
Is the air purifier switched on?
Switch on the air purifier by pressing the switch button (page 30).
Has the Quiet function been activated?
If you press the switch button once, the air purifier switches to automatic mode. Disable the Quiet function by selecting a different fan speed via the app or on the remote control (only IDEAL AP40 Pro).
Automatic mode is not working properly.
The air purifier is calibrating the air quality sensor. This happens when you first switch it on and after disconnecting it from the mains.
Wait until the calibration process has been completed (this may take a few minutes)
The air quality sensor is not detecting the air quality reliably.
Calibrate the air quality sensor by briefly disconnecting it from the mains again!
Odours are not being filtered properly.
Is the air purifier continuously exposed to strong odours?
The filter needs to be changed (page 35-36) because the activated carbon filter becomes saturated and reliable air purification is no longer guaranteed.
Are the odours being drawn in at all?
Place the air purifier closer to the source of the odours. Switch the air purifier manually to a higher fan speed (page 30).
Page 41 of 69

Text on page 42
The air purifier is making loud noises.
Is the filter cartridge really dirty?
Clean the pre-filter with a vacuum cleaner.
Is the air purifier located on an even surface?
P lace the device on an even surface.
Is the air purifier running at a high fan speed?
U se the switch button to set a lower fan speed.
Did none of the specified solutions help you with your problem? Contact: Service
- www.krug-priester.com
- service@krug-priester.com
Page 42 of 69

Text on page 43
IDEAL AP30 Pro:
200-240V 50/60Hz / 100-120V 50/60Hz 30W (200-240V) / 25W (100-120V)
20 to 40 m² *
Air flow rate (max.)
Dimensions (L × W × H)
298 × 255 × 398 mm
Volume at turbofan speed
Volume in Quiet mode
IDEAL AP40 Pro:
200-240V 50/60Hz / 100-120V 50/60Hz 75W (200-240V) / 55W (100-120V)
30 to 50 m² *
Air flow rate (max.)
Dimensions (L × W × H)
298 × 255 × 398 mm
Volume at turbofan speed
Volume in Quiet mode
Subject to technical changes.
- For a room height of 2.50 m
Page 43 of 69

Text on page 44
Terms of warranty IDEAL provides a warranty for this device from the date of purchase. The terms of warranty are defined by our local representative.
- If a material or design defect occurs during the warranty period, IDEAL shall repair or replace the device, or repay the purchase price, at its discretion.
- The warranty will only be honoured if sufficient evidence is submitted, e.g. sales receipt, and the claim under warranty is made within the warranty period.
- The warranty does not cover wearing parts or parts that need to be replaced regularly.
- The warranty shall be void if the device is not set up, adjusted and cleaned/maintained correctly (in accordance with the operating instructions).
- The warranty shall be void if the device is connected to a power supply that does not comply with the rating plate data.
Storage We recommend storing the air purifier in its original packaging in a cool, dry place. Pack and store the filter cartridge airtight to protect the activated carbon.
Spare parts and accessories You can source spare parts via your dealer or at www.ideal.de. Only use the manufacturer's original parts.
Repairs Repairs must only be carried out by qualified experts or the customer service department. This also applies if you have a defective power cable. Any attempt by untrained persons to perform repairs may pose considerable risk to the user and invalidate the warranty.
Disposal This device must not be disposed of with household waste! Please hand this device in at the collection points provided! Collecting and recycling electrical and electronic waste conserves valuable resources! The packaging material can be recycled. Dispose of the packaging in an environmentally friendly manner and take it to the recyclable waste collection. Thanks!
Page 44 of 69

Text on page 45
The company Krug + Priester has the following certifications:
- Quality management system according to DIN EN ISO 9001:2015
- Environmental management system according to DIN EN ISO 14001:2009
- Energy management system according to DIN EN ISO 50001:2011
Page 45 of 69

Text on page 46
This machine is GS-tested and conforms to the following EC guidelines:
- 2014/35/EU for electrical safety
- 2014/30/EU for electromagnetic compatibility.
- 2011/65/EU RoHS.
For specific technical data, please refer to the information on the identification plate of the machine. To file a warranty claim, the device must still bear its original identification plate. Subject to technical changes.
- Herewith we declare that
GS-IDENT. No. IDEAL AP30 Pro Made in Germany 11731002 IDEAL AP40 Pro Made in Germany 11731001
UL-IDENT. No. 10731002 10731001
- complies with the following provisons applying to it
2014/35/EU Low voltage directive
2011/65/EU RoHS directive
2014/30/EG EMV Electromagnetic compatibility directive
- Applied harmonised standards in particular
IEC 61000-3-2; IEC 61000-3-3; EN 61000-3-2; EN 61000-3-3; EN 60335-2-65; EN 60335-1; EN ISO 13857; EN 55014-1; EN 55014-2
01.02.2018 Datum
Authorized representative for technical documentation:
Krug & Priester GmbH & Co KG Simon-Schweitzer-Str. 34 D-72336 Balingen (Germany)
Page 46 of 69

Text on page 47
FR Mode d´emploi (46 – 67)
Utilisation conforme Consignes de sécurité Caractéristiques du produit Contenu de la livraison Déballage et installation Utilisation Mise en service / Niveaux de ventilation Utilisation Affichage Voyant de la qualité de l’air Voyant de remplacement du filtre
IDEAL AP 40 Pro uniquement : Télécommande (première utilisation) Télécommande (remplacement de la pile) Télécommande (fonctionnement)
Remplacement du filtre Pilotage au travers d’une application smartphone WiFi Nettoyage et entretien Accessoires Pannes éventuelles Caractéristiques techniques
Page 47 of 69

Text on page 48
Préface Nous vous remercions d'avoir opté pour un appareil de la maison IDEAL.
Utilisation conforme
- L'appareil est exclusivement destiné à l'épuration de l'air ambiant en intérieur.
- Veuillez lire impérativement ce mode d’emploi et observer les consignes de sécurité avant la mise en service de la machine. Ce mode d’emploi doit être disponible à tout moment.
Consignes de sécurité
- Conservez les emballages, telles que les films d’emballage, hors de portée des enfants ! (Risque d’asphyxie)
- Respectez les consignes de sécurité pour éviter le risque d’incendie ou d’électrocution. N’utilisez l’appareil qu’à l’intérieur.
- Utilisez uniquement une prise de courant avec la tension indiquée (voir plaque signalétique).
- Ne procédez à aucune modification ou réparation sur l'appareil.
- N’utilisez l’appareil en aucun cas si le cordon d'alimentation ou la fiche secteur est endommagée ou si le branchement dans la prise murale est instable.
- Veillez à ce que le cordon d'alimentation ne soit pas pincé et ne puisse pas être endommagé d’une autre manière pendant le fonctionnement. Posez le cordon de sorte à éviter que quelqu’un puisse trébucher sur le cordon. Le cordon d'alimentation ne doit pas être tendu.
- Débranchez la fiche en cas de non-utilisation prolongée ou à des fins de nettoyage.
- Ne touchez pas la fiche ou l’appareil avec des mains mouillées.
- Ne pulvérisez pas de produit insecticide.
- N'utilisez pas l'appareil dans des locaux dans lesquels l'air est susceptible de contenir des vapeurs de combustibles, vapeur d’huile ou des poussières métalliques.
- N’utilisez pas de liquide volatile, de white-spirit, de kérosène, de diluant ou de la pâte de polissage pour le nettoyage. Ces produits risquent d’endommager la surface de l’appareil.
- N'exposez en aucun cas l'appareil à la pluie, à l'eau ou à une forte humidité de l'air, ne le placez pas dans la salle de bains ou dans la cuisine à proximité d'un lavabo ou d'un évier.
- Veillez à ce qu'aucun corps étranger ne pénètre dans les grilles d'évacuation.
- Les flammes nues et les étincelles sont à proscrire.
- L'appareil n'est pas destiné à l'élimination de gaz nocifs (monoxyde de carbone provenant par ex. d'installations de chauffage à combustion).
- Les personnes qui ne sont pas familiarisées avec le mode d’emploi, de même que les enfants et les personnes sous l‘influence de médicaments, d‘alcool ou de drogues ne sont pas autorisées à faire fonctionner l‘appareil sans surveillance.
Page 48 of 69

Text on page 49
Consignes de sécurité
- N'obstruez jamais les orifices d'entrée et d'évacuation de l'air.
- Conservez cet appareil à l’abri des rayons du soleil, des flammes nues et de toute source de chaleur.
- N'utilisez pas l'épurateur d'air sans filtre.
- N'utilisez l'épurateur d'air que dans des pièces d'habitation et dans les limites spécifiées dans les caractéristiques techniques. Toute utilisation non conforme peut gravement menacer la santé et même la vie des personnes.
- Ne pas utiliser l’appareil près d’une alarme incendie. Si l’air de la sortie soufle vers une alarme incendie, l’alarme pourrait rèpondre tardivement, ou ne pas rèpondre.
Attention Risque de blessure en raison d'un choc électrique. Toujours débrancher la fiche secteur avant:
- l'entretien et le nettoyage
- le déplacement de l'appareil
- le remplacement du filtre
Attention Ne pas utiliser d’aérosols de substances inflammables à proximité du Purificateur !
Attention Ne pas utiliser de détergents inflammables.
Page 49 of 69

Text on page 50
Caractéristiques du produit / Contenu de la livraison
- Voyant de remplacement du filtre : La touche marche/arrêt (EASY Touch) clignotant en orange sur l’épurateur d’air indique que la cartouche filtrante doit être remplacée.
- 5 niveaux de puissance pour l'épuration de l'air
- Système d'épuration de l'air sur 3 niveaux : pré-filtre, filtre HEPA recouvert de charbon actif
- Filtre 360° (Pré-filtre, HEPA + charbon actif) Pour un entretien et un remplacement aisés de la cartouche filtrante.
Contenu de la livraison
Purificateur (tête de l’appareil)
Cartouche filtrante
- Pré-filtre
- Filtre HEPA recouvert de charbon actif
Luftreiniger Air Purifier Purificateur
Télécommande
- Avec pile au lithium 3V (IDEAL AP40 Pro uniquement)
Revêtement textile haut-de-gamme
- avec fermeture auto-agrippante (IDEAL AP40 Pro uniquement)
Page 50 of 69

Text on page 51
Consignes d'installation en vue d'un fonctionnement optimal :
- Installez l'appareil à au moins 10 cm du mur.
- Évitez les lieux d'installation dans lesquels l'appareil se trouverait exposé à un flux d'air direct (vent).
- Évitez toute installation dans laquelle des meubles, des textiles ou autres objets pourraient entrer en contact avec l'orifice d'entrée ou d'évacuation d'air ou l'obstruer.
- Posez l'appareil sur une surface horizontale stable et veillez à une circulation suffisante de l'air.
Retirer le cordon d'alimentation (1.), le mode d'emploi (2.), la télécommande (3. IDEAL AP40 Pro uniquement) et le revêtement textile (4. IDEAL AP40 Pro uniquement).
Extraire la cartouche filtrante du carton, la déballer et retirer le film protecteur.
Extraire et déballer l'épurateur d'air (tête de l'appareil).
Page 51 of 69

Text on page 52
Sortir le revêtement textile (IDEAL AP40 Pro uniquement) de son film protecteur, l'envelopper autour de la cartouche filtrante et fermer à l'arrière (élément de fermeture A).
Installer la cartouche filtrante en positionnant les trois ergots dans les trois évidements prévus à cet effet et verrouiller au niveau de l'élément de fermeture (A) .
Brancher d'abord le cordon d'alimentation sur l'appareil, puis dans la prise de courant. Si la cartouche filtrante est absente ou mal montée, la touche marche/arrêt clignote (B) en rouge et l'épurateur d'air ne fonctionne pas.
Remarque :
Conservez l'emballage à des fins de stockage si vous n'utilisez pas l'épurateur d'air toute l'année. Afin de préserver le charbon actif, veuillez stocker la cartouche filtrante dans un emballage hermétique.
Ne pas utiliser le filtre à air sans les parements et capots de protection intégralement montés et fixés (grille de protection du moteur, cartouche filtrante, etc.)
Page 52 of 69

Text on page 53
Mise en service / Niveaux de ventilation
- Brancher le cordon d'alimentation, effleurer la touche marche/arrêt (B). L'épurateur d'air démarre en mode automatique . La touche marche/arrêt s'allume.
- En actionnant la touche marche/arrêt, vous quittez le mode automatique. L'épurateur d'air fonctionne alors au niveau de ventilation 1 . La touche marche/arrêt clignote 1 fois.
- En actionnant à nouveau la touche, la ventilation passe au niveau 2 . La touche marche/arrêt clignote 2 fois. Un nouvel actionnement permet de faire passer la ventilation au niveau 3 (clignote 3 fois) ou au niveau turbo (clignote 4 fois).
- En appuyant une nouvelle fois sur la touche marche/arrêt, la ventilation passe en mode silence . La touche marche/arrêt s'illumine faiblement.
Le mode silence est prévu pour un fonctionnement particulièrement silencieux et discret (par ex. dans une chambre à coucher). L'épurateur d'air bascule sur le niveau de ventilation le plus faible.
- En actionnant à nouveau la touche marche/ arrêt, l'épurateur d'air revient au mode automatique .
Remarque : Il est possible d'éteindre l'épurateur d'air en maintenant la touche marche/arrêt enfoncée. Un nouvel actionnement permet de rallumer l'appareil.
Page 53 of 69

Text on page 54
Voyant de la qualité de l’air
La qualité de l'air est indiquée en 3 couleurs (quel que soit le niveau de ventilation) :
touche marche/arrêt (B) verte : bonne qualité de l'air
touche marche/arrêt jaune : qualité de l'air médiocre
touche marche/arrêt rouge : mauvaise qualité de l'air
Voyant de remplacement du filtre
La nécessité de remplacement du filtre est indiquée par le clignotement en orange de la touche marche/arrêt (B) (clignotement par intermittence).
- La durée de vie prévisible du filtre est égale à 1 an (selon les performances et la puissance d’épuration).
- Si les odeurs ne sont plus filtrées ou si le filtre produit des odeurs désagréables, la cartouche filtrante doit être remplacée plus tôt.
- N’utilisez que des filtres originaux IDEAL. L’appareil ne fonctionne qu’avec un filtre original IDEAL.
Remarque: Si la cartouche filtrante est absente ou mal montée, la touche marche/arrêt clignote en rouge et l'épurateur d'air ne fonctionne pas.
Page 54 of 69

Text on page 55
Télécommande (IDEAL AP40 Pro uniquement)
Utilisation de la pile
- Pour la télécommande, utilisez toujours des piles 3V CR2025.
- Une utilisation incorrecte de la pile peut entraîner un écoulement du liquide de la pile et/ou des dommages.
- En cas de non-utilisation prolongée de la télécommande, veuillez retirer la pile.
Positionnement inapproprié
- Aucun objet, ni aucun meuble ne doit se trouver entre la télécommande et l'épurateur d'air.
- L'épurateur d'air ne doit pas être exposé au rayonnement direct du soleil. Le capteur infrarouge peut s'en trouver endommagé.
- Les lieux dans lesquels des tubes fluorescents clignotent, en raison de tubes défectueux/ usagés.
- N'exposez pas la télécommande au rayonnement direct du soleil et/ou à proximité de chauffages/appareils de chauffage.
Lors de la première utilisation
Le télécommande possède une pile au lithium CR2025 pré-installée. Retirer la lanière de 8h protection pour activer la pile de 4h 2h la télécommande. 1h
o urb
Maniement incorrect
- Orienter la télécommande vers l’épurateur d’air (touche marche/arrêt B).
Page 55 of 69

Text on page 56
Télécommande (IDEAL AP40 Pro uniquement)
CR 3V
Remplacement de la pile
- Ouvrez le compartiment de la pile en appuyant dessus (A) et en le sortant simultanément (B). Retirer la pile usagée.
- Insérer une pile neuve dans le compartiment de la pile en respectant la polarité indiquée (+ / -).
- Utilisez toujours des piles 3V CR2025.
- Replacer le compartiment de la pile dans son logement (C).
Consignes importantes concernant les piles et leur mise au rebut Les piles ne sont PAS des ordures ménagères. En tant que consommateurs, vous êtes légalement tenus de rapporter les piles usagées dans un centre de recyclage agréé. Vous pouvez déposer vos piles dans les points de collecte publics de votre localité ou dans n'importe quel point de vente de piles du même type.
- Respectez impérativement la polarité correcte des piles. Des piles mal installées peuvent entraîner une destruction de l'appareil - risque d'incendie.
- N'essayez pas d'ouvrir ou des dommages les piles et ne les jetez pas au feu.
- Les piles dont le liquide s'écoule présentent un risque. N'y touchez qu'avec des gants adaptés.
- Ne laissez pas les piles à portée des enfants.
- Ne sortez les piles de l'appareil qu'en cas de non-utilisation prolongée.
Page 56 of 69

Text on page 57
Télécommande (IDEAL AP40 Pro uniquement)
A Touches niveaux de ventilation
F Touche de verrouillage
A : Le niveau de ventilation souhaité
peut être sélectionné directement.
B : Bascule l'épurateur d'air en mode automatique
C : Met l'épurateur d'air en marche/arrêt
D : Bascule l'épurateur d'air en mode silence
peut être sélectionnée directement. E : La durée de programmation souhaitée Si la touche programmation est actionnée alors que l’épurateur d’air est en marche, le « programmateur de mise à l’arrêt » s’active L’épurateur d’air se met à l’arrêt après la durée programmée. Si la touche programmation est actionnée alors que l’épurateur d’air est éteint, le « programmateur de mise en marche » s’active L’épurateur d’air se met en marche après la durée programmée. Visualisation sur l’application uniquement (smartphone / tablette).
, on bloque la touche marche/arrêt de l’épurateur F : En actionnant la touche verrouillage d’air. Un nouvel appui sur la touche verrouillage lève le blocage. Le blocage peut également être levé en débranchant l’épurateur d’air.
Remarque : En actionnant la télécommande, la touche marche/arrêt de l’épurateur d’air s’allume en blanc pendant environ 1 seconde pour confirmer la réception. Lorsque la confirmation a lieu alors que la fonction de verrouillage est active, la touche marche/arrêt s’allume brièvement en rouge.
Page 57 of 69

Text on page 58
Remplacement du filtre (par ex. après l'illumination du voyant de la qualité de l'air, voir page 53)
Remarque : Utiliser exclusivement des cartouches filtrantes originales IDEAL (à commander sur www.ideal.de). La cartouche filtrante peut être remplacée sans outillage.
ATTENTION
Débrancher la fiche d'alimentation de la prise. Poser l'épurateur d'air à l'envers. Débrancher la fiche d'alimentation sur l'appareil.
Déverrouiller la cartouche filtrante au niveau de l'élément de fermeture (A) , puis la retirer.
Enlever le revêtement textile (IDEAL AP40 Pro uniquement). Retirer le film protecteur sur la cartouche filtrante neuve.
Page 58 of 69

Text on page 59
Remettre en place le revêtement textile (IDEAL AP40 Pro uniquement) sur la cartouche filtrante et le fermer à l'arrière (élément de fermeture A).
Installer la cartouche filtrante en positionnant les trois ergots dans les trois évidements prévus à cet effet et verrouiller au niveau de l'élément de fermeture (A) .
Brancher d'abord le cordon d'alimentation sur l'appareil, puis dans la prise de courant. L'appareil ne fonctionne que si la cartouche filtrante est correctement montée.
Remarque : L'épurateur d'air détecte automatiquement qu'une cartouche filtrante IDEAL neuve a été installée et réinitialise automatiquement le voyant de remplacement du filtre.
Page 59 of 69

Text on page 60
Pilotage au travers d’une application smartphone / WiFi
Pilotage au travers d’une application smartphone
Votre purificateur peut aussi être piloté avec l’application « IDEALAIRPRO » depuis votre smartphone / tablette (iOS / Android).
Consulter l'état de la connexion WiFi :
L'épurateur d'air est en marche. Appuyer sur la touche WiFi le WiFi est activé lorsque la touche marche/arrêt clignote en bleu le WiFi est désactivé lorsque la touche marche/arrêt clignote en blanc.
Activer / désactiver le WiFi
L'épurateur d'air est en marche. Appuyer sur la touche WiFi. Lorsque la touche marche/arrêt se met à clignoter (en bleu ou en blanc), appuyer une nouvelle fois sur la touche WiFi pour activer ou désactiver le WiFi.
Réinitialiser le WiFi :
L'épurateur d'air est en marche. Le WiFi est activé. Tout en maintenant la touche marche/arrêt enfoncée, appuyer sur la touche WiFi et la maintenir enfoncée jusqu'à ce que la touche marche/arrêt clignote en rose.
Page 60 of 69

Text on page 61
Nettoyage et entretien / Accessoires
ATTENTION : A
vant tous travaux de nettoyage et d'entretien, débrancher la fiche secteur !
- Remplacez la cartouche filtrante dès que le voyant de remplacement du filtre (page 53) s'allume. La durée de vie moyenne du filtre est égale à 1 an (selon les performances et la puissance d'épuration).
- Nettoyez le boîtier de l'épurateur d'air avec un chiffon non pelucheux, humecté d’eau savonneuse.
- Nettoyez le pré-filtre de la cartouche filtrante avec un aspirateur.
- N'utilisez pas de solvants. Ceux-ci pourraient endommager la surface du boîtier.
- Protégez l'épurateur d'air de l'eau.
- Évitez l'utilisation de produits à base de silicone sous peine de détruire le capteur de la qualité de l'air.
- Évitez de tester l'effet du capteur de la qualité de l'air avec des gaz fortement dosés ou des alcools sous peine de détruire le capteur de la qualité de l'air.
- Nettoyez le revêtement textile avec un aspirateur.
- Si besoin, le revêtement textile peut également être lavé à la main (tenez compte pour cela des consignes d’entretien sur l’étiquette).
Vous pouvez vous procurer accessoires auprès de votre revendeur spécialisé ou sur www.ideal.de.
Page 61 of 69

Text on page 62
Impossible de mettre l'épurateur d'air en marche.
Le cordon d'alimentation à l'arrière de l'appareil est-il correctement branché ? A ssurez-vous que le cordon d'alimentation ne présente aucun dommage. Contrôlez les deux extrémités du cordon d'alimentation. Assurez-vous qu'elles sont bien enfichées et que l'alimentation électrique est bien établie (page 51). La cartouche filtrante installée est-elle d’origine ? La cartouche filtrante est-elle correctement installée ? Assurez-vous qu'une cartouche filtrante originale IDEAL est bien installée. A ssurez-vous que les 3 ergots de retenue de la cartouche filtrante sont bien encliquetés et que celle-ci est bien verrouillée (symbole cadenas, page 51).
La touche marche/arrêt de l’épurateur d’air ne fonctionne pas.
La fonction verrouillage est-elle activée ? D ésactivez la fonction verrouillage sur la télécommande (IDEAL AP40 Pro uniquement) ou via l’application (fonction F page 56). D ébranchez le cordon d'alimentation puis rebranchez-le. Une pile est-elle insérée dans la télécommande ? Est-elle usagée ? Vérifiez la pile (lithium 3V CR2025). Maniement correct ? O rientez la télécommande en direction de l'épurateur d'air (page 54). La fonction commande à distance est verrouillée pendant environ 10 secondes après le branchement de l’alimentation ou après un changement de filtre.
Les touches de la télécommande d'air ne fonctionnent pas (IDEAL AP40 Pro uniquement).
Page 62 of 69

Text on page 63
La touche marche/arrêt est faiblement illuminée ou bien éteinte.
L'épurateur d'air est-il en marche ? M ettre en marche l’épurateur d’air en actionnant la touche marche/arrêt (page 52). La fonction silence est-elle activée ? Appuyez une nouvelle fois sur la touche marche/arrêt, l’épurateur d’air repasse en fonctionnement automatique. Désactivez la fonction silence en sélectionnant un autre niveau de ventilation via l’application ou sur la télécommande (IDEAL AP40 Pro uniquement).
Le mode automatique ne fonctionne pas de façon réglementaire.
L’épurateur d’air étalonne le capteur de la qualité de l’air. Cette opération se produit à la première mise en marche et après une coupure d’alimentation. Attendez la fin de l’opération d’étalonnage (peut durer plusieurs minutes) Le capteur de la qualité de l'air ne détecte pas la qualité de l'air de manière fiable Réétalonnez le capteur de la qualité de l'air en coupant brièvement l'alimentation !
Les odeurs sont mal filtrées.
L’épurateur d’air est-il exposé en permanence à de fortes odeurs ? Il est nécessaire de remplacer le filtre (page 57-58), puisque le filtre à charbon actif fini par être saturé et ne permet plus une épuration d’air fiable. Les odeurs sont -elles bien absorbées ? Placez l'épurateur d'air plus près de la source des odeurs. Réglez manuellement l'épurateur d'air sur un niveau de ventilation supérieur (page 52).
Page 63 of 69

Text on page 64
L'épurateur d'air émet beaucoup de bruit.
La cartouche filtrante est-elle fortement encrassée ? Nettoyez le pré-filtre avec un aspirateur. L'épurateur d'air se trouve-t-il sur une surface horizontale ? P lacez l'appareil sur une surface horizontale. L'épurateur d'air est-il réglé sur un niveau de ventilation élevé ? Avec la touche marche/arrêt, réglez un niveau de ventilation plus faible.
Aucune des solutions proposées ici ne peut vous aider ? Contact : Service
- www.krug-priester.com
- service@krug-priester.com
Page 64 of 69

Text on page 65
IDEAL AP30 Pro:
200-240V 50/60Hz / 100-120V 50/60Hz 30W (200-240V) / 25W (100-120V)
Adapté aux pièces spacieuses
298 × 255 × 398 mm
Émission sonore niveau de (max.) ventilation turbo
Émission sonore niveau de ventilation en mode silence
IDEAL AP40 Pro:
200-240V 50/60Hz / 100-120V 50/60Hz 75W (200-240V) / 55W (100-120V)
Adapté aux pièces spacieuses
298 × 255 × 398 mm
Émission sonore niveau de (max.) ventilation turbo
Émission sonore niveau de ventilation en mode silence
Sous réserve de modifications techniques.
- Pour une hauteur de 2,50 m
Page 65 of 69

Text on page 66
Clauses de garantie IDEAL accorde une garantie pour cet appareil à partir de la date d'achat. Les clauses de garantie sont fixées par notre filiale du pays concerné.
- Si un vice matériel ou de construction apparaît pendant la période de garantie, IDEAL procédera à la réparation, au remplacement ou au remboursement du prix d’achat de l’appareil selon sa propre évaluation.
- Les prestations de garantie ne pourront être fournies que si des justificatifs suffisants, p.ex. un bon d'achat, sont présentés et que le droit à garantie est réclamé pendant la période de garantie.
- La garantie ne couvre pas les pièces d’usure ni les pièces à changer régulièrement.
- La garantie expire si l’appareil n'est pas installé, utilisé et nettoyé/entretenu correctement (conformément aux indications du mode d’emploi).
- La garantie expire si l’appareil est branché sur une alimentation électrique non conforme aux indications de la plaque signalétique.
Stockage Conserver l’épurateur d'air de préférence dans son emballage d’origine à un endroit sec et pas trop chaud. Afin de préserver le charbon actif, veuillez stocker la cartouche filtrante dans un emballage hermétique.
Pièces de rechange et accessoires Vous pouvez vous procurer des pièces de rechange auprès de votre revendeur spécialisé ou sur www.ideal.de. N'utilisez que des pièces d'origine du fabricant.
Réparations Ne confiez les réparations qu'à des spécialistes ou au service après-vente. Ceci s'applique également à un cordon d'alimentation défectueux. Des réparations effectuées de manière inappropriée peuvent générer des risques considérables pour l'utilisateur et entraîner une perte de la garantie.
Mise au rebut Cet appareil ne doit pas être jeté avec les ordures ménagères ! Veuillez déposer cet appareil dans les points de collecte prévus à cet effet ! La collecte et le recyclage des déchets électriques et électroniques permet la préservation de précieuses ressources ! Le matériau d'emballage est recyclable. Éliminez l'emballage dans le respect de l'environnement et apportez-le dans un point de collecte des matières recyclables. Merci !
Page 66 of 69

Text on page 67
La société Krug + Priester dispose des certifications suivantes :
- Système de management de la qualité selon DIN EN ISO 9001:2015
- Système de management de l’environnement selon DIN EN ISO 14001:2009
- Système de management de l’énergie selon DIN EN ISO 50001:2011
Page 67 of 69

Text on page 68
Cette machine est certifiée GS et répond aux directives CE suivantes :
- 2014/35/EU pour la sécurité électrique
- 2014/30/EU pour la compatibilité électromagnétique.
- 2011/65/EU RoHS.
Les caractéristiques techniques spécifiques apparaissent parmi les informations figurant sur la plaque signalétique de la machine. Pour toute demande d'intervention au titre de la garantie, l'appareil doit être identifiable par sa plaque signalétique. Sous réserve de modifications techniques.
Déclaration de conformité CE
- Par la présente, nous déclarons que
GS-IDENT. No. IDEAL AP30 Pro Made in Germany 11731002 IDEAL AP40 Pro Made in Germany 11731001
UL-IDENT. No. 10731002 10731001
- sont conformes aux dispositions pertinentes suivantes
2014/35/EU Directives basse tension
2011/65/EU RoHS directives
2014/30/EG EMV directives compatibilité électromagnétique
- Normes harmonisées utilisées, notamment
IEC 61000-3-2; IEC 61000-3-3; EN 61000-3-2; EN 61000-3-3; EN 60335-2-65; EN 60335-1; EN ISO 13857; EN 55014-1; EN 55014-2
01.02.2018 Datum
Représentant autorisé pour la documentation technique:
Krug & Priester GmbH & Co KG Simon-Schweitzer-Str. 34 D-72336 Balingen (Germany)
Page 68 of 69

Page 69 of 69 ยท End of manual
Quick start
- Place the purifier on a stable, even surface at least 10 cm from the wall, away from drafts and with nothing blocking the air intake or outlet.
- Lift the filter cartridge out of the box, unpack it and remove the protective film.
- Fit the textile cover around the filter cartridge and close it at the back.
- Insert the filter cartridge with its three snap-fit tabs into the three recesses and lock it at the locking component.
- Connect the power cable to the purifier first, then to the wall socket.
- Press the switch button. The purifier starts in automatic mode.
- Press the switch button again to step through fan speeds 1, 2, 3, Turbo and Quiet, then back to automatic. Press and hold to switch off.
- To activate the remote control, remove the protective flap from the pre-installed CR2025 battery.
Troubleshooting
| Problem | Likely cause | Fix (from the manual) |
|---|---|---|
| The air purifier won't switch on | Power cable not securely connected, or the filter cartridge is missing, not original IDEAL, or not inserted correctly. | Check both ends of the power cable. Make sure an original IDEAL filter cartridge is clicked in with all 3 tabs and fully locked. If the cartridge is missing or wrong, the switch button flashes red. Page 40 |
| The switch button does not respond | The locking function has been activated. | Disable the locking function on the remote control or in the app, or unplug the power cable and plug it back in. Page 40 |
| Remote control buttons do not work | Flat or missing battery, not pointed at the purifier, or the remote is blocked for about 10 seconds after connecting power or changing the filter. | Check the 3V CR2025 lithium battery and point the remote at the switch button. Page 40 |
| Automatic mode is not working properly | The air quality sensor is calibrating, which happens at first switch-on and after disconnecting from the mains. | Wait a few minutes for calibration to finish. If the sensor still reads unreliably, briefly disconnect the purifier from the mains to recalibrate. Page 41 |
| Odours are not being filtered properly | The activated carbon filter is saturated, or the odours are not being drawn in. | Change the filter cartridge. Move the purifier closer to the odour source or select a higher fan speed. Page 41 |
| The air purifier is making loud noises | Dirty pre-filter, uneven surface or a high fan speed. | Vacuum the pre-filter, place the purifier on an even surface, or set a lower fan speed. Page 42 |
Frequently asked questions
What room size is the IDEAL AP40 Pro rated for?
30 to 50 m², based on a room height of 2.50 m. Power consumption is 75W (200-240V) / 55W (100-120V). See page 43.
How often should I replace the filter?
The filter lasts about 1 year depending on use. The switch button flashes orange when it needs changing, and you should replace it sooner if odours are no longer filtered. See page 32.
What is the order number for the replacement filter cartridge?
Order no. 7310 099. Only original IDEAL cartridges work, and the purifier resets the filter indicator automatically when a new one is fitted. See page 37.
Can I control it from my phone?
Yes. The purifier can be controlled with the IDEALAIRPRO app (iOS/Android) over WLAN. Press the WLAN button to check status: blue means enabled, white means disabled. See page 38.
What do the switch button colours mean?
Green is good air quality, yellow is average and red is poor. Flashing orange means the filter needs changing; flashing red means the cartridge is missing or not installed correctly. See page 32.
