MBM Luft AP60 Pro Air Purifier User Manual, page 1

Page 1 of 26

MBM Luft AP60 Pro Air Purifier User Manual, page 2
Text on page 2

Luftreiniger Air Purifier Purificateur

IDEAL AP60 Pro IDEAL AP80 Pro

Page 2 of 26

MBM Luft AP60 Pro Air Purifier User Manual, page 3
Text on page 3

DE Betriebsanleitung (2 - 23) EN Operating Instructions (24 – 45) FR Mode d´emploi (46 – 67)

Bestimmungsgemäßer Gebrauch Sicherheitshinweise Produkteigenschaften Lieferumfang Auspacken und Aufstellen Übersicht und Benennung der Teile Bedienfeld

Lüfterstufen 10 Timerfunktion Quiet-Funktion Luftqualitätsanzeige Filterwechselanzeige Tageslichtsensor IR-Empfänger Luftqualitätssensor Fernbedienung (Bei der ersten Benutzung) Fernbedienung (Batterie austauschen) Fernbedienung (Funktion)

Filterwechsel APP-Steuerung Reinigung und Pflege Mögliche Störungen Technische Daten

Page 3 of 26

MBM Luft AP60 Pro Air Purifier User Manual, page 4
Text on page 4

EN Operating Instructions (24 – 45)

Intended use Safety instructions Product features Included in the box Unpacking and setting up Overview and description of parts Control panel

Fan speeds Timer function Quiet function Air quality indicator Filter replacement indicator Daylight sensor IR receiver Air quality sensor Remote control (when using for the first time) Remote control (replacing the battery) Remote control (function)

Changing the filter App Control Cleaning and maintenance Troubleshooting Technical data

Page 4 of 26

MBM Luft AP60 Pro Air Purifier User Manual, page 5
Text on page 5

Introduction Thank you for choosing a device from IDEAL.

Intended use

  • The device is used exclusively for cleaning the ambient air indoors.
  • Please read these operating instructions before starting to use the device and please follow the safety instructions. The operating instructions must be kept available with the device at all times.

Safety instructions

  • Keep packing material, such as plastic wrapping, away from children! (Risk of suffocation)
  • Please follow the safety instructions to prevent fire or electric shock. Only use the device indoors.
  • Only use a wall socket that supplies the correct voltage (see rating plate).
  • Do not modify or repair the device.
  • Do not use the device if the power cable or mains plug is damaged or if the connection at the wall socket is not stable.
  • Make sure that the power cable does not get crushed while you are using the device and that it cannot be damaged in any other way. Place the cable so that no one will trip over it. Do not place the power cable under strain.
  • Disconnect the plug from the wall socket for cleaning purposes and whenever the device is not in use for a significant period of time.
  • Do not touch the plug or the device if you have wet hands.
  • Do not spray any insect repellent.
  • Do not use in rooms where the device may come into contact with fuel vapour or metal dust.
  • Do not use any volatile liquids, petroleum, kerosene, paint thinner or polishing paste to clean the device. Such liquids may damage the surface of the device.
  • Do not expose the device to rain, water, moisture or high humidity, and do not set it up in a bathroom or kitchen next to a sink.
  • Make sure that no foreign objects get into the outlet grilles.
  • Do not use near an open fire or sparks.
  • The device is not suitable for removing harmful gases (carbon monoxide, e.g. from heating appliances).

Page 5 of 26

MBM Luft AP60 Pro Air Purifier User Manual, page 6
Text on page 6

Safety instructions

  • Do not block the air intake and outlet.
  • Keep the device away from sources of heat such as direct sunlight or radiators, etc.
  • Make sure that no water vapour comes into contact with the device.
  • Do not use in rooms where the device may come into contact with oil vapour.
  • Do not use the air purifier without a filter.
  • Only use the air purifier in living spaces and within the specified technical parameters. Improper usage may pose a threat to life and health.
  • Children may not recognise hazards associated with electrical equipment. You should therefore always supervise children near and around the air purifier.
  • Anyone who is not familiar with the operating instructions, any children and anyone under the influence of medication, alcohol or drugs must not use the device or may only use it under supervision.

Caution Risk of injury due to electric shock. Always disconnect the mains plug prior to:

  • Carrying out maintenance work or cleaning
  • Moving the device
  • Changing the filter

Danger

  • Do not use any spray cans with flammable content near to the Air Purifier!

Danger

  • Do not use any flammable cleaning agents.

Page 6 of 26

MBM Luft AP60 Pro Air Purifier User Manual, page 7
Text on page 7
  • Filter replacement indicator: An illuminated red replacement indicator on the air purifier indicates that the filter cartridge needs to be replaced.
  • Air purification in 5 speed settings
  • 3-stage air purification system: Pre-filter, HEPA filter coated with activated carbon
  • 360° filter (Pre-filter, HEPA + active carbon) Easy maintenance and replacement of the filter cartridge.

Included in the box

Air Purifier (including filter cartridge)

Filter cartridge

  • Pre-filter
  • HEPA filter coated with activated carbon

Luftreiniger Air Purifier Purificateur

Remote control

  • With self-adhesive magnetic film
  • With 3V lithium battery

IDEAL AP60 Pro IDEAL AP80 Pro

Printed operating instructions

Page 7 of 26

MBM Luft AP60 Pro Air Purifier User Manual, page 8
Text on page 8

Unpacking and setting up

Installation guidelines for optimum performance:

  • The air intake ducts on the top can be used as handles (see adjacent diagram).
  • Place the device at least 10 cm away from the wall.
  • Keep the device away from areas subjected to draft (wind).
  • Make sure that furniture, fabrics or other objects do not come in contact with the air intake/ outlet or block them.
  • Place the device on a stable, even surface and make sure there is sufficient air circulation.

Take out the power cable (1.), operating instructions (2.) and remote control (3. with self-adhesive magnetic film).

Remove top packaging tray. Grasp the Air Purifier by the air intake ducts and lift it out of the box.

The front panel is hooked from below at two ends and is kept closed by totally 4 magnets. Open the front panel at the top, grip it firmly (5.) and then swing it downwards (6.).

Remove the single piece of cardboard (7. Transport safety).

Remove the front panel (8.).

Please remove and dispose the self-adhesive tape (4. Transport safety).

Page 8 of 26

MBM Luft AP60 Pro Air Purifier User Manual, page 9
Text on page 9

Unpacking and setting up

Hold the filter cartridge with both hands using the recessed grips provided and turn it anti‑clockwise (9.). Take out the filter cartridge (10.) and remove the protective film (11.).

Insert the filter cartridge with the three tabs in the notches provided and lock in position by turning clockwise (12.).

Hook in the front panel at the bottom first (13.), then pivot upwards and press shut (14.). Connect the power cable to the device first (15.), then to the socket (16.).

Note:

Use the original packaging to store the air purifier if you are not using it all year round. Pack and store the filter cartridge airtight to protect the activated carbon.

No operation of the air purifier without the complete and secure attachment of the cladding and safety covers (motor safety grill, air outlet grill, front panel etc.).

Page 9 of 26

MBM Luft AP60 Pro Air Purifier User Manual, page 10
Text on page 10

Overview and description of parts

Page 10 of 26

MBM Luft AP60 Pro Air Purifier User Manual, page 11
Text on page 11

E Air quality indicator

B Fan speed button

G Fan speed indicator

L Air quality sensor

Note: The air quality sensor (L) is recalibrated the first time you switch it on (A) and after being disconnected from the mains power supply. During calibration, the fan speed indicator (G) and the air quality indicator (E) flash green alternately. After a few minutes, the air purifier switches to automatic mode . Once the air quality sensor has been calibrated, the air purifier always starts in automatic mode. If the filter cartridge is missing or wrong (no original IDEAL filter cartridge), the filter replacement (F) and air quality indicators (E) flash red alternately. The air purifier can only be operated with an original IDEAL filter cartridge inserted.

Page 11 of 26

MBM Luft AP60 Pro Air Purifier User Manual, page 12
Text on page 12

E Air quality indicator

B Fan speed button

G Fan speed indicator

L Air quality sensor

Fan speeds

  • Press the on/off button (A) to switch the air purifier on or off.
  • The air purifier runs in automatic mode . In automatic mode, the fan speed (G) automatically adapts to the measured air quality. The worse the air quality, the higher the fan speed.
  • Press the fan speed button (B) to exit automatic mode. The air purifier now runs at fan speed . Press again to increase the fan speed to . Press again to increase the fan speed to , or to the turbofan speed .
  • The turbo speed setting for fast purification of the ambient air requires the air purifier to run at maximum capacity. This can only be selected manually.

Timer functions Pressing the timer while the air purifier is switched on activates the “switch-off timer”  after the set time, the air purifier switches off:

  • Switch the air purifier on (on/off button A).
  • Press the timer button (C) to activate the timer. Press repeatedly to increase the timer time:  . Each number lights up in turn. Press the timer button again (no number
  1.   lights up) to disable the timer function.
  • The timer indicator counts the respective time with (  Countdown). The remaining time is displayed.

Pressing the timer button while the air purifier is switched off activates the "switch-on timer"  after the set time, the air purifier switches on.

Page 12 of 26

MBM Luft AP60 Pro Air Purifier User Manual, page 13
Text on page 13

E Air quality indicator

B Fan speed button

G Fan speed indicator

L Air quality sensor

Quiet function The Quiet button (D) is provided for particularly low-noise, unobtrusive operation (e.g. bedrooms). Press the Quiet button (D) to switch the fan speed (G) to its lowest capacity and switch off all indicators. Only the Quiet indicator (I) is dimly lit.

Air quality indicator (E) The air quality is displayed in 3 colours: Green: good air quality Yellow: average air quality Red: poor air quality

Filter replacement indicator (F) An illuminated red " " on the control panel indicates that the filter needs replacing.

  • The life expectancy of the filter is approx. 1 year (depending on operation and purification activities).
  • If odours are no longer being filtered out, or if the filter produces unpleasant odours, then the filter cartridge needs to be replaced sooner.
  • Only use original IDEAL filter cartridge. The device will only function with an original IDEAL filter cartridge.

Daylight sensor (J) The display brightness is automatically adjusted to the ambient light.

IR receiver (K) Receives the signals from the remote control.

Air quality sensor (L)

Page 13 of 26

MBM Luft AP60 Pro Air Purifier User Manual, page 14
Text on page 14

Battery usage

  • Always use 3V lithium batteries CR2025 for the remote control.
  • Incorrect battery usage may result in leakage of battery fluid and/or damage.
  • If the remote control is not going to be used for a long time, please remove the battery.

Unsuitable location

  • Make sure that no objects or furnishings are situated between the remote control and the air purifier.
  • The air purifier should not be placed in direct sunlight. This could impair the infrared sensor.
  • Locations where fluorescent tubes are flickering because they are defective or old.
  • Do not store the remote control in direct sunlight and/or close to radiators/heaters.
  • When using for the first time

The remote control has a pre-installed lithium battery CR2025. Remove the protective flap to 8h 4h activate the remote control battery.

How to use correctly

  • Point the remote control at the air purifier (IR receiver K).

Page 14 of 26

MBM Luft AP60 Pro Air Purifier User Manual, page 15
Text on page 15

CR 3V

Replacing the battery

  • Open the battery compartment by pressing
  1. and pulling out (B) at the same time.

Take out the flat battery.

  • Insert a new battery into the battery compartment, making sure the polarity is correct (+ / -).
  • Always use 3V lithium batteries CR2025.
  • Slide the battery compartment back into its seating (C).

The remote control comes with a selfadhesive magnetic film (D). If required, this can be stuck on the back of the remote control. With the magnetic film stuck on it, the remote control can easily be attached to any ferromagnetic surface (e.g. on the back of the air purifier).

Important information about the batteries and how to dispose of them Batteries must NOT be disposed of with household waste. As the user, you are legally obligated to return used batteries for proper disposal. You can hand in your batteries at public collection points in your community or wherever the same type of batteries are sold.

  • It is very important that you make sure that the polarity of the batteries is correct. Wrongly inserted batteries could destroy the device – a fire hazard.
  • Do not try to open or damage batteries and do not throw batteries into a fire.
  • Batteries that are leaking fluid are dangerous. Only touch these with suitable gloves.
  • Keep batteries out of the reach of children.
  • Take the batteries out of the device if you are not going to be using it for a significant period of time.

Page 15 of 26

MBM Luft AP60 Pro Air Purifier User Manual, page 16
Text on page 16

M Fan speed buttons

Function M: Select the required fan speed . N: Switches the air purifier to automatic mode . O: Switches the air purifier on/off . P: Switches the air purifier to Quiet mode . Q: Select the required timer time . to lock the buttons on the control panel (air purifier). R: Press the locking button Press the locking button again to unlock. The lock can also be removed by disconnecting the air purifier from the mains or by pressing and holding down the on/off button (A) on the device.

Note: When you operate the remote control, the air quality indicator (E) lights up for approx. 1 second in acknowledgement. If you operate a button on the control panel (air purifier) while the locking function is activated, the air quality indicator (E) lights up briefly in red.

E Air quality indicator

Page 16 of 26

MBM Luft AP60 Pro Air Purifier User Manual, page 17
Text on page 17

Filter replacement (e.g. in accordance with the filter replacement indicator F, see page 33)

Note: Only original IDEAL filter cartridges (order from www.ideal.de) may be used. No tools are required to replace the filter cartridge.

CAUTION: Disconnect the mains plug!

The front panel is hooked in at the bottom in two places, and kept shut with 4 magnets. Open the front panel from the top and hold (1.), pivot downwards (2.) and take off (3.).

Hold the spent filter cartridge with both hands using the recessed grips provided and turn it (4.). anti-clockwise Remove the filter cartridge (5.). Remove the protective film from the new filter cartridge (6.).

Insert the new filter cartridge with the three tabs in the notches provided and lock in position by turning clockwise (7.).

Hook in the front panel at the bottom first (8.), then pivot upwards and press shut (9.). Connect the power cable to the device first (10.), then to the socket (11.).

Note: The air purifier automatically detects that a new IDEAL filter cartridge has been inserted and automatically resets the filter replacement indicator.

Order no. 8741 100

Page 17 of 26

MBM Luft AP60 Pro Air Purifier User Manual, page 18
Text on page 18

Your purifier can additionally be controlled by the "IDEAL AIR PRO" App via your smartphone (iOS /Android).

For information, please see www.ideal-air.de

CAUTION: Disconnect the mains plug prior to any cleaning or maintenance work!

  • Replace the filter cartridge as soon as the filter replacement indicator (F, page 33) lights up. The average life expectancy of the filter is approx. 1 year (depending on operation and purification activities).
  • Clean the air purifier housing with a lint-free cloth moistened with soapy water.
  • Clean the control panel with a dry, lint-free cloth.
  • Clean the openings for the air quality sensor (L, page 31) with a vacuum cleaner.
  • Clean the air intake ducts (page 30) and the interior of the air purifier with a vacuum cleaner.
  • Clean the filter cartridge's pre-filter with a vacuum cleaner. To do this, remove the filter cartridge ("Changing the filter" page 37).
  • Do not use any solvents. These could damage the housing surface, the control panel and the air quality sensor.
  • Protect the air purifier from water.
  • Do not use any substances containing silicone, since this could destroy the air quality sensor.
  • Do not test the effectiveness of the air quality sensor with high quantities of gas, or alcohol, since this could destroy the air quality sensor.

Page 18 of 26

MBM Luft AP60 Pro Air Purifier User Manual, page 19
Text on page 19

The air purifier won't switch on.

Is the power cable securely connected to the back of the device?

 M ake sure that the power cable is not damaged in any way.

 C heck both ends of the power cable. Make sure that these are plugged in and that the purifier is connected to the power supply (page 29).

Has a filter cartridge been inserted? Is the filter cartridge inserted correctly?

 M ake sure that an original IDEAL filter cartridge is inserted.

 M ake sure that the filter cartridge is clicked in place with all 3 tabs and is fully locked (padlock icon, page 29).

The buttons on the air purifier do not work.

Has the locking function been activated?

 Disable the locking function on the remote control (function R, page 36).

 U nplug the power cable and then plug it back in.

The buttons on the remote control do not work.

Is the battery in the remote control? Or is it flat?

 C heck the battery (3V lithium CR2025).

Is the IR receiver dirty?

 C lean the IR receiver with a dry, lint-free cloth.

Are you using it correctly?

 P oint the remote control at the air purifier (page 34).

 Having joined the power cord or exchanged the filter, the function of the remote control is blocked for about 10 seconds

Page 19 of 26

MBM Luft AP60 Pro Air Purifier User Manual, page 20
Text on page 20

The indicators on the control panel do not light up at all.

Is the air purifier switched on?

 S witch the air purifier on by pressing the on/off button (A, page 31).

Has the Quiet function been activated?

 D isable the Quiet function by pressing the Quiet button (D, page 33).

Automatic mode is not working properly.

The air purifier calibrates the air quality sensor. This happens when you first switch it on and after disconnecting it from the mains.

 W ait until the calibration process (see Note, page 31) has been completed (this may take a few minutes)

The air quality sensor is dirty.

 C lean the openings for the air quality sensor (L, page 31), the air intake ducts (page 30) and the interior of the air purifier (where the filter cartridge is located) with a vacuum cleaner.

The air quality sensor is not detecting the air quality reliably  C alibrate the air quality sensor by briefly disconnecting it from the mains again!

Odours are not being filtered properly.

Is the activated carbon in the filter cartridge spent?

 Replace the filter cartridge (page 37). I f the air purifier has been continuously exposed to strong odours, it may be that the activated carbon is spent before the filter replacement indicator (F, page 33) lights up.

Are the odours being drawn in at all?

 P lace the air purifier closer to the source of the odours.

 S witch the air purifier manually to a higher fan speed (page 32).

Page 20 of 26

MBM Luft AP60 Pro Air Purifier User Manual, page 21
Text on page 21

The air purifier is making loud noises.

Is the filter cartridge really dirty?

 C lean the pre-filter with a vacuum cleaner.

Is the air purifier located on an even surface?

 P lace the device on an even surface.

Is the air purifier running at a high fan speed?

 U se the fan speed button (B, page 32) to set a lower fan speed (G, page 32).

In bright environments, the indicators on the air purifier control panel are too dark.

Is the daylight sensor dirty?

 C lean the relevant section on the control panel (J, page 31)! T he display intensity automatically adapts to its surroundings.

None of the above mentioned methods helped to solve the problem: Contact Service Team:

  • www.ideal.de  "Service" service@krug-priester.com

Page 21 of 26

MBM Luft AP60 Pro Air Purifier User Manual, page 22
Text on page 22

IDEAL AP60 Pro:

200-240V 50/60Hz / 100-120V 50/60Hz   90W (200-240V) / 75W (100-120V)

50 to 70 m² *

Air flow rate (max.)

Dimensions (L × W × H)

468 × 275 × 668 mm

Volume at turbofan speed

Volume in Quiet mode

IDEAL AP80 Pro:

200-240V 50/60Hz / 100-120V 50/60Hz   175W (200-240V) / 180W (100-120V)

70 to 90 m² *

Air flow rate (max.)

Dimensions (L × W × H)

468 × 275 × 668 mm

Volume at turbofan speed

Volume in Quiet mode

Subject to technical changes.

  • For a room height of 2.50 m

Page 22 of 26

MBM Luft AP60 Pro Air Purifier User Manual, page 23
Text on page 23

Terms of warranty IDEAL provides a warranty for this device from the date of purchase. The terms of warranty are defined by our local representative.

  • If a material or design defect occurs during the warranty period, IDEAL shall repair or replace the device, or repay the purchase price, at its discretion.
  • The warranty will only be honoured if sufficient evidence is submitted, e.g. sales receipt, and the claim under warranty is made within the warranty period.
  • The warranty does not cover wearing parts or parts that need to be replaced regularly.
  • The warranty shall be void if the device is not set up, adjusted and cleaned/maintained correctly (in accordance with the operating instructions).
  • The warranty shall be void if the device is connected to a power supply that does not comply with the rating plate data.

Storage We recommend storing the air purifier in its original packaging in a cool, dry place. Pack and store the filter cartridge airtight to protect the activated carbon.

Spare parts and accessories You can source spare parts via your dealer or at www.ideal.de. Only use the manufacturer's original parts.

Repairs Repairs must only be carried out by qualified experts or the customer service department. This also applies if you have a defective power cable. Any attempt by untrained persons to perform repairs may pose considerable risk to the user and invalidate the warranty.

Disposal This device must not be disposed of with household waste! Please hand this device in at the collection points provided! Collecting and recycling electrical and electronic waste conserves valuable resources! The packaging material can be recycled. Dispose of the packaging in an environmentally friendly manner and take it to the recyclable waste collection. Thanks!

Page 23 of 26

MBM Luft AP60 Pro Air Purifier User Manual, page 24
Text on page 24

The company Krug + Priester has the following certifications:

  • Quality management system according to DIN EN ISO 9001:2015
  • Environmental management system according to DIN EN ISO 14001:2009
  • Energy management system according to DIN EN ISO 50001:2011

Page 24 of 26

MBM Luft AP60 Pro Air Purifier User Manual, page 25
Text on page 25

This machine is GS-tested and conforms to the following EC guidelines:

  • 2014/35/EU for electrical safety
  • 2014/30/EU for electromagnetic compatibility.
  • 2011/65/EU RoHS.

For specific technical data, please refer to the information on the identification plate of the machine. To file a warranty claim, the device must still bear its original identification plate. Subject to technical changes.

  • Herewith we declare that

GS-IDENT. No. IDEAL AP60 Pro Made in Germany 11874101 IDEAL AP80 Pro Made in Germany 11874102

UL-IDENT. No. 10874101 10874102

  • complies with the following provisons applying to it

2014/35/EU Low voltage directive

2011/65/EU RoHS directive

2014/30/EG EMV Electromagnetic compatibility directive

  • Applied harmonised standards in particular

IEC 61000-3-2; IEC 61000-3-3; EN 61000-3-2; EN 61000-3-3; EN 60335-2-65; EN 60335-1; EN ISO 13857; EN 55014-1; EN 55014-2

01.06.2017 Datum

Authorized representative for technical documentation:

Krug & Priester GmbH & Co KG Simon-Schweitzer-Str. 34 D-72336 Balingen (Germany)

Page 25 of 26

MBM Luft AP60 Pro Air Purifier User Manual, page 26

Page 26 of 26 ยท End of manual

Quick start

  1. Take out the power cable, manual and remote control, remove the top packaging tray and lift the purifier out by its air intake ducts.
  2. Open the magnetic front panel at the top, swing it down and lift it off. Remove the cardboard transport safety and the self-adhesive tape.
  3. Turn the filter cartridge anti-clockwise using the recessed grips, take it out and remove the protective film.
  4. Reinsert the cartridge with its three tabs in the notches and turn it clockwise to lock.
  5. Hook the front panel in at the bottom, pivot it up and press it shut.
  6. Place the purifier on a stable, even surface at least 10 cm from the wall. Connect the power cable to the purifier first, then to the socket.
  7. Press the on/off button. The sensor calibrates for a few minutes (indicators flash green), then the purifier runs in automatic mode.
  8. Press the fan speed button to choose speeds 1 to 3 or Turbo manually, or press Quiet for the lowest, darkened setting.

Troubleshooting

ProblemLikely causeFix (from the manual)
The air purifier won't switch onPower cable not securely connected, or the filter cartridge is missing, not original IDEAL, or not locked in.Check both ends of the power cable. Make sure an original IDEAL cartridge is clicked in with all 3 tabs and fully locked. A missing or wrong cartridge makes the filter and air quality indicators flash red alternately. Page 19
The buttons on the air purifier do not workThe locking function has been activated.Unlock with the remote control's locking button, or unplug the power cable and plug it back in. Page 19
The remote control does not workFlat or missing battery, dirty IR receiver, not pointed at the purifier, or the remote is blocked for about 10 seconds after connecting power or changing the filter.Check the 3V CR2025 lithium battery, clean the IR receiver with a dry, lint-free cloth and point the remote at the purifier. Page 19
The control panel indicators do not light upThe purifier is off, or the Quiet function is active.Press the on/off button, or press the Quiet button to leave Quiet mode. Page 20
Automatic mode is not working properlyThe sensor is calibrating, or the air quality sensor is dirty.Wait a few minutes for calibration to finish. Vacuum the sensor openings, air intake ducts and interior. Briefly disconnect from the mains to recalibrate. Page 20
Odours are not being filtered properlyThe activated carbon is spent, which can happen before the indicator lights if the purifier is exposed to strong odours.Replace the filter cartridge. Move the purifier closer to the odour source or select a higher fan speed. Page 20
The air purifier is making loud noisesDirty pre-filter, uneven surface or a high fan speed.Vacuum the pre-filter, place the purifier on an even surface, or set a lower fan speed. Page 21
Indicators are too dark in bright roomsThe daylight sensor is dirty.Clean the daylight sensor area on the control panel. Page 21

Frequently asked questions

What room size is the IDEAL AP60 Pro rated for?

50 to 70 m², based on a room height of 2.50 m. Power consumption is 90W (200-240V) / 75W (100-120V). See page 22.

How often should I replace the filter cartridge?

About once a year, depending on use. A red filter replacement indicator lights when it is due; replace it sooner if odours are no longer filtered. See page 13.

What is the order number for the replacement filter?

The manual lists filter cartridge order no. 8741 100. Only original IDEAL cartridges work, and the indicator resets automatically when a new one is fitted. See page 17.

How does the timer work?

With the purifier on, press the timer button to set a switch-off timer; press repeatedly to increase the time and once more to cancel. Pressing it while the purifier is off sets a switch-on timer. See page 12.

Can I lock the buttons?

Yes. Press the locking button on the remote control. Press it again, hold the on/off button on the purifier, or disconnect the mains to unlock. See page 16.