Rack

Mondo Mobile

Parts

ITEM # Description Qty. Cart Base Horizontal Support 23 Cross Brace Left Upright 62 Right Upright 62

ITEM # Hardware Description Qty.

1/2-13 Nut 3/8 Flat Washer 88 3/8 - 16 Locknut 3/8 - 16 Bolt 1 x 2" Plastic Plug 1/4 -20Locknut

16 18

Hardware

3/8 - 16 3/8 -16 1/2 Flat 1/2 Lock 1/2-13 4"Caster 1/4 Flat 1/4-20 3/8Flat 1"x 2"Plastic

Bolt Washer

Bolt Washer Locknut Washer Locknut Washer Nut

16 11 x18 x9 x9 X4 x8 x8 x8 15 12 X4 X4 14 10 X4

Mondo Mobile Rack Instructions

1. Open Box-Remove all contents 2. Lay all items onthe floor and 3. Begin bolting wheels on to base

verify you have all contents

SEE BACK OF PAGE FOR PARTS LIST frame making sure each wheel

necessary for assembly is tight

4. Lock wheels into place for easier 5. Using the longer bolts and nuts, 6. Before tightening all the rack assembly of rest of rack start adding rack sides side bolts,begin adding cross

beams and braces.

7. Startwith the top horizontal 8. Then begin bolting theX cross 9. Tighten all bolts and nuts on cross beam braces starting with the center cross braces and horizontal (straight beam w/bend in it) and bolt andnut and thenbolt itto beams and then double check then thebottom crossbeam the horizontal beams top and all rack sides and wheels for

bottom tightness.

10. Add black plastic end caps to 11. You are done! the frame ends