Paitec MX11000 User Manual, page 1

Page 1 of 33

Paitec MX11000 User Manual, page 2
Text on page 2

Model MX11000

User Manual

MyBinding.com 5500 NE Moore Court Hillsboro, OR 97124 Toll Free: 1-800-944-4573 Local: 503-640-5920

Page 2 of 33

Paitec MX11000 User Manual, page 3
Text on page 3

Greeting

Thank you for purchasing Paitec USA products. This manual is prepared to provide guidelines on how to properly operate and maintain MX11000

Copyright

Any of the contents should not be copied, re-printed or translated by other languages without Paitec USA approval.

Notice

Caution: Physical injury and serious mechanical damage will occur when disregarding this information.

Important: This information is contained with useful information and guidance.

Reference: This information guides the chapter which detailed contents.

MyBinding.com 5500 NE Moore Court Hillsboro, OR 97124 Toll Free: 1-800-944-4573 Local: 503-640-5920

Page 3 of 33

Paitec MX11000 User Manual, page 4
Text on page 4

Table of Contents

MyBinding.com 5500 NE Moore Court Hillsboro, OR 97124 Toll Free: 1-800-944-4573 Local: 503-640-5920

Chapter 1 - Installation 1-1 Installation Environment 1-2 Unpacking 1-3 Removing Safety Tapes and Styrofoam 1-4 Power Connection 1-5 Power Fan Installation 1-6 Tray Guide Installation 1-7 Online Interface Installation 1-8 Conveyor Installation

Chapter 2 - Before Operating 2-1 Identifying Parts 2-2 Caution for Installation

Chapter 3 - Preparing for Operation 3-1 Paper Size 3-2 Loading the Forms 3-3 Fold Setting 3-4 Fine Adjustment of Folding Position 3-5 Conveyor Wheel Setup

Chapter 4 - Handling Errors 4-1 Error Message 4-2 Handling Paper Jams

Chapter 5 - Maintenance 5-1 Exchanging Friction Reverse Roller 5-2 Cleaning Rollers

Chapter 6 - Troubleshooting 6-1 No Power 6-2 Incorrect Folding 6-3 Power On, but No Start 6-4 Frequent Double or Multiple Sheet Feeding

Chapter 7 - Conveyor 7-1 Conveyor Installation

Page 4 of 33

Paitec MX11000 User Manual, page 5
Text on page 5

Chapter 1 - Installation

1-1 Installation Environment

  1. Input power: 110V (Max 5A)
  2. Machine size (mm): 17" x 24" x 15" (without conveyor)
  3. Machine weight: 143 lbs.
  • Since the weight of a product is heavy, please use appropriate table for putting it on.
  • Please use folded power cable.

1-2 Unpacking

Please check if all of the following parts are included in the box.

  • Main body
  • Inline interface unit and guide
  • Power cable
  • Power infeed fan, power adaptor
  • User’s manual and fix bracket
  • Jam removal handle and spare handle tips - Spare fuse (8A)
  • Tray guide

1-3 Removing Safety Tape and Styrofoam Location

Please remove all safety tapes and Styrofoam before operation.

  1. Safety cover of feeding unit (2ea)
  2. Safety cover of upper cassette (2ea)
  3. Lower cassette cover (2ea)
  4. Upper cassette (1ea)
  5. Paper tray (upper/1ea)
  6. Paper tray (lower/2ea)
  7. Upper cassette (1ea)

Page 5 of 33

Paitec MX11000 User Manual, page 6
Text on page 6

1-4 Power Connection

Please refer to the label for electric information which is located at the back side of the machine. When the power cable is properly connected, please switch the machine on and check whether ‘Ready’ sign is displayed on the display panel. If not, please contact your local dealer for service.

1-5 Power Fan Installation

Please attach the power infeed fan at the rear cover like the picture above. The power infeed fan allows smoother feeding of the forms.

1-6 Tray Guide Installation

Please install like the left picture by using enclosed tray guide and two fixing screws.

Tray guide has to be removed when using the printer online.

MyBinding.com 5500 NE Moore Court Hillsboro, OR 97124 Toll Free: 1-800-944-4573 Local: 503-640-5920

Page 6 of 33

Paitec MX11000 User Manual, page 7
Text on page 7

1-7 Inline Interface Installation

  1. Please prepare enclosed inline interface guide and a guide clip.
  2. Remove a tray guide if it is set up.
  3. Install like the left pictures after moving the tray down and fix it by using two fixing screws.
  4. Install a guide clip like picture B.
  5. Change to inline mode by using ‘machine set up mode’. (Please see below)

Inline Set Up Mode Installation

By pressing set-up button for three seconds, users can access into setup program mode

  1. Inline select mode: Users are able to use printer inline button in operation panel when inline mode is on.
  2. Inline LCT cover mode: In the inline mode, it able to recognize whether feeding unit safety cover is opened, closed or ignore it so it is possible to set up for users’ environment. (This function is needed when printing security documents.)
  3. Initialize: It makes the machine to be initialized to set-up condition when first delivered from a warehouse. (Factory default)

1-8 Conveyor Installation

Please refer to page 28 for proper conveyor installation.

Page 7 of 33

Paitec MX11000 User Manual, page 8
Text on page 8

Chapter 2 - Before Operating

2-1 Identifying Parts and Functions

1. Feeding Unit Safety Cover

2. Upper Fold Cassette Safety Cover

3. Large Capacity Tray

4. Lower Fold Cassette

7. Jam Removal Handle

8. Serial Number Label

Page 8 of 33

Paitec MX11000 User Manual, page 9
Text on page 9

2. Feed Guide (Left)

3. Feed Guide (Right)

6. Tray Level Sensor

3. Stopper Adjustment Knob

4. Folding Scale Label

5. Stopper Locking Knob

1. Upper Cassette Handle

2. Folding Scale Label

3. Stopper Adjustment Knob

4. Stopper Locking Knob

5. Fold Position Marker

Page 9 of 33

Paitec MX11000 User Manual, page 10
Text on page 10

2. Conveyor Wheel Holder

5. Main Power Socket

6. Conveyor Power Socket

7. Manual Feed Button

9. Lower Press Roller Cover

10. Upper Press Roller Cover

11. Jam Removal Holes

3. Conveyor Side Guide

Inline interface Guide (optional)

Page 10 of 33

Paitec MX11000 User Manual, page 11
Text on page 11

Name and Function of Each Button

MyBinding.com 5500 NE Moore Court Hillsboro, OR 97124 Toll Free: 1-800-944-4573 Local: 503-640-5920

Page 11 of 33

Paitec MX11000 User Manual, page 12
Text on page 12
  1. Mode - Displays current status of the machine.
  2. Speed - Displays the machine’s current set speed.
  3. ( - ) Button - Decreases the speed or value.
  4. Printer Inline Button - Changes to online/offline mode. (operable only at online mode)
  5. Batch Counter Button - You can set the number of forms that you wish to process and have the machine stop automatically until you press the start button. For example, if you set the batch counter at 100, after 100 forms are processed, the machine will automatically stop and will not start until you press the start button.
  • Press the batch counter button and the light will blink.
  • Change the displayed value by using +/- button and when ready, press the set button.
  • When changing the value, press the batch counter button to increase the value by 50 up to 500.
  • This setting is not stored after rebooting the machine.
  1. Thickness Sensor Button - Thickness sensor function allows you to prevent any serious paper jams caused by double feeding or multiple sheet feeding.
  • Press the thickness sensor button and one form will feed.
  • The form stops and is scanned by the thickness sensor.
  • After the reading is completed, the form then processes through.
  • The LED light will remain on and your desired thickness is stored in the setting.
  • Feeding of any forms outside of the calibrated setting will stop the machine from further processing while using this function.

Reference

  • Whenever you change to a different form, please reset the thickness value by following the steps indicated above.
  • Using the same setting with a different paper will stop the machine as the form will be recognized as a double feed.
  1. Jam Free Button - Clears any jam in the press roller unit.

Important

  • Jam free function will not clear all jams. If a jam is not cleared with this function, please refer to the next chapter on handling errors.

MyBinding.com 5500 NE Moore Court Hillsboro, OR 97124 Toll Free: 1-800-944-4573 Local: 503-640-5920

Page 12 of 33

Paitec MX11000 User Manual, page 13
Text on page 13
  1. Auto Start Button - You can choose to separate your job by using the ‘Auto Start’ function. You can simply set your desired volume per run and the time interval in between run. For example, if you set the counter at 50 and auto start at 5 seconds, the machine will run 50 forms and stops for five seconds until it starts again to process 50 forms and so on. (Available only when using batch counter function)
  • Press the auto start button while the batch counter button is on.
  • Change the time interval by using +/- button from 1 to 99.
  • After the setting is ready, press the set button to store the setting.
  1. Manual Feed Button - Allows the processing of single damaged forms.
  • Press the manual feed button on the control panel.
  • Place the folded form at the entrance of the exit press rollers on the conveyor.
  • Then press the second manual button (red button located at the front cover).
  • Please do not release the manual feed button on the control panel until the job is completed.
  • In case you release the manual feed button and the panel reads ‘stacker full’, press the jam free button to clear the form from the press rollers.
  1. Start/Stop Button - Start or stops the machine.
  2. Reset Counter Button - Clears the count on the display panel.
  3. Set Button - Stores any value or setting.
  4. (+) Button - Increases the speed or value.
  5. Total Counter - Displays the total count of the machine.
  6. Counter - Displays the current count of the machine.

MyBinding.com 5500 NE Moore Court Hillsboro, OR 97124 Toll Free: 1-800-944-4573 Local: 503-640-5920

Page 13 of 33

Paitec MX11000 User Manual, page 14
Text on page 14

Chapter 3 - Preparing for operation

3-1 Paper Size

MX9000 will not handle any form that is larger or smaller than the following forms.

Reference

  • Using forms that do not fall under the specified size may result in paper jam or machine damage.

Important

  • Please check whether any forms are stapled. Staples will seriously damage the machine.

3-2 Loading the Forms

  1. Before loading the forms onto the machine, please make sure all forms are aligned and fanned. Please refer to the images below.

If the conditions of the forms are not flat as the picture above (Bad), place appropriate quantity of forms, otherwise forms will be jammed.

Page 14 of 33

Paitec MX11000 User Manual, page 15
Text on page 15
  1. Open the safety cover of the feeding unit. The tray will go down.
  2. When the feed tray is down to the bottom, loosen the green knobs on both paper guides.
  3. Load the aligned forms onto the feed tray and adjust the paper guides so they are gently covering the sides of the stacked forms.
  4. Tighten back the green knobs on both paper guides.
  5. Once loading is complete, please close the safety cover. The feed tray will go up.

Caution

  • Poor quality forms may cause frequent paper jams.
  • Make sure the paper guides are not set narrower or wider than the width of the paper.

Reference

  • When the forms are fed into the machine, all forms go to the upper cassette and then to the lower cassette.
  • Please refer to the images below to understand more about the path in which the forms are folded.

Caution

  • Please do not place any objects that may cover the sensor as indicated in the picture.

Page 15 of 33

Paitec MX11000 User Manual, page 16
Text on page 16

3-3 Fold Setting

The following instruction shows how to set 8 1/2 X 11 sizes Z-Fold.

1. Lower Cassette Fold Setting - 93mm

1. Unlock the fold position of the lower cassette by turning the stopper locking knob counter clockwise.

2. Adjust the stopper so the surface of the rubber is lined up at 93mm.

3. Lock the stopper by holding the stopper adjustment knob and turning the stopper locking knob clockwise.

2. Upper Cassette Fold Setting - 93mm

1. Unlock the fold position of the upper cassette by turning the stopper locking knob counter clockwise.

2. Adjust the stopper so the red marker is lined up at 93mm.

3. Lock the stopper by holding the stopper adjustment knob and turning the stopper locking knob clockwise.

Page 16 of 33

Paitec MX11000 User Manual, page 17
Text on page 17

Understanding Folding Mechanism

It is important to understand how MX-9000 folds paper in order to accurately set the fold setting. Please read the following information carefully to fully understand the folding mechanism of MX-6000.

  1. The folding unit is composed of rollers, cassettes and stoppers.
  2. The form enters in between the two front fold rollers.
  3. The form hits the upper cassette stopper and buckles in the middle. Then the folded portion enters in between the middle two rollers.

Page 17 of 33

Paitec MX11000 User Manual, page 18
Text on page 18
  1. The form hits the lower cassette stopper and forms a buckle. The folded form then enters in between the two outer rollers.
  2. The folded form then exits the fold rollers and then are sent to the press unit.

MyBinding.com 5500 NE Moore Court Hillsboro, OR 97124 Toll Free: 1-800-944-4573 Local: 503-640-5920

Page 18 of 33

Paitec MX11000 User Manual, page 19
Text on page 19

Infeed Direction

Outfeed Direction

First Fold (Upper Cassette)

Second Fold (Lower Cassette)

When setting a Z-Fold, please read the following steps.

  1. Measure the length from line 1 to line 2 of the form as indicated in the image above. That measurement is the fold setting for the first (upper cassette) fold.
  2. Measure the length from line 2 to line 3 of the form as indicated in the image above. That measurement is the fold setting for the second (lower cassette) fold.

Page 19 of 33

Paitec MX11000 User Manual, page 20
Text on page 20

First Fold (Upper Cassette)

When setting a V or a Single-Fold, please read the following steps.

  1. Measure the length from line 1 to line 2 of the form as indicated in the image above. That measurement is the fold setting for the first (upper cassette) fold.
  2. Make sure the V-fold guide is placed at the entrance of the lower cassette.

Page 20 of 33

Paitec MX11000 User Manual, page 21
Text on page 21

Second Fold (Lower Cassette)

First Fold (Upper Cassette)

When setting a C-Fold, please read the following steps.

  1. Measure the length from line 1 to line 3 of the form as indicated in the image above. That measurement is the fold setting for the first (upper cassette) fold.
  2. Measure the length from line 3 to line 2 of the form as indicated in the image above. That measurement is the fold setting for the second (lower cassette) fold.

Page 21 of 33

Paitec MX11000 User Manual, page 22
Text on page 22

Second Fold (Lower Cassette)

First Fold (Upper Cassette)

When setting a Double-Fold, please read the following steps.

  1. Measure the length from line 1 to line 3 of the form as indicated in the image above. That measurement is the fold setting for the first (upper cassette) fold.
  2. Measure the length from line 3 to line 2 of the form as indicated in the image above. That measurement is the fold setting for the second (lower cassette) fold.

Page 22 of 33

Paitec MX11000 User Manual, page 23
Text on page 23

Second Fold (Lower Cassette)

First Fold (Upper Cassette)

When setting a Window-Fold, please read the following steps.

  1. Measure the length from line 1 to line 4 of the form as indicated in the image above. That measurement is the fold setting for the first (upper cassette) fold.
  2. Measure the length from line 4 to line 2 of the form as indicated in the image above. That measurement is the fold setting for the second (lower cassette) fold.

Page 23 of 33

Paitec MX11000 User Manual, page 24
Text on page 24

3-4 Fine Adjustment of Folding Position

You can adjust the fold setting in the following cases.

  1. Fine adjustment is required from the standard folding type.
  2. In case the folding is slightly different.

Reference If the folding is slightly off from the desired position, please check the following possible causes.

  1. Incorrect fold setting
  2. Machine clearance
  3. Incorrect position of fold cassettes
  4. The FRR or the fold rollers are worn out

3-5 Conveyor Wheel Setup

The conveyor wheel can be adjusted to accommodate different forms with different lengths. Please refer to the following pictures to correctly set the wheels to accommodate your form lengths.

MyBinding.com 5500 NE Moore Court Hillsboro, OR 97124 Toll Free: 1-800-944-4573 Local: 503-640-5920

Page 24 of 33

Paitec MX11000 User Manual, page 25
Text on page 25

Chapter 4 - Handling Errors

4-1 Error Message

There are various types of sensors located at different parts of MX11000. These sensors detect and display the location of an error on the panel. Please read the following errors to understand how to handle each error.

When a form does not reach the infeed sensor after infeed.

When a form is jammed at the infeed sensor.

When a form is jammed at the folding unit.

When a form is jammed at the press unit.

When the stacker is full and the last form is detected by the exit sensor.

When the paper thickness cannot detect the thickness of the form being scanned by the thickness sensor.

When the lower cassette is not closed all the way.

When there are no forms on the paper tray or the paper sensor is not detecting any forms.

When the upper cassette safety cover is opened.

When the feeding unit safety cover is opened.

Page 25 of 33

Paitec MX11000 User Manual, page 26
Text on page 26

4-2 Handling paper jams

Removing the jammed paper at the upper cassette

  1. Open the top upper cassette safety cover.
  2. Pull out the upper cassette and remove any jammed paper.

Caution Please be cautious when removing jammed forms as it may result in damaging the upper cassette.

Removing jammed paper at the lower cassette

  1. Open the lower cassette cover.
  2. Remove any jammed paper.

Removing jammed paper at the press unit. There can be different reasons for a paper jam at the press unit.

A. Double Feed

1. Try to remove the jam by using the jam free button.

2. If the jam is not cleared by using the jam free button, please use the jam removal handle to manually remove the jam.

When removing the jam, turn the press rollers by inserting the jam removal handle and turn it clockwise like the picture.

Caution

  1. Turn off the power.
  2. Never operate the machine with the jam removal handle set up.

Caution

  • If the jammed paper is too thick to pass through the press roller even by using the jam removal handle, please turn the handle in the reverse direction of the direction which is indicated in the picture above.

Important

  • The press rollers are designed to accept 16~29 lbs. forms. Any forms that are heavier may affect the machine to malfunction.

Page 26 of 33

Paitec MX11000 User Manual, page 27
Text on page 27

Chapter 5 - Maintenance

5-1 Replace Feed Roller (set of three)

The feeding rollers consist of three different rollers;

  1. Pick up roller
  2. Feed roller
  3. Separate roller

There is no certain life cycle for these rollers since it may vary depending on different environment, forms, and etc. Read the following instructions on how to replace these rollers.

Separate roller (Below feed roller)

  1. Remove the snap ring (white clip).
  2. Replace the roller and place back the snap ring.
  3. Follow step 1 & 2 for the rest of the rollers.

Page 27 of 33

Paitec MX11000 User Manual, page 28
Text on page 28

5-2 Cleaning Rollers

Since Pressure seal forms leave paper dust, ink and toner residues, it is very important to occasionally clean the surface of the each roller to maintain its best condition for better performance.

  1. Paper dust
  • Use small air cleaner or dust remover.
  1. Cleaning fold rollers
  • Open the safety cover and slide out the upper cassette. With a piece of soft cloth, use Denatured Alcohol to remove any ink contamination or toner residues on the surface of the fold rollers.

Caution - Please do not use any other substance when cleaning the surface of the fold rollers as it may damage the rubber.

  1. Cleaning press rollers
  • A professional’s aid is necessary to clean press rollers. Try to clean it by an engineer’s help, if possible. If you are going to do it by yourself, please remove (unplug) the power.
  • Remove conveyor wheel holder, lower press roller cover and upper press roller cover in the picture below.
  • Two rollers and inner lower press roller shown in picture A can be cleaned.
  • Inner upper roller can be cleaned like picture B.

Page 28 of 33

Paitec MX11000 User Manual, page 29
Text on page 29

Chapter 6 - Troubleshooting

Some of the errors can easily be fixed by the user without a professional’s aid.

6-1 No Power

  1. Check whether the power cable is properly connected.
  2. Check the power supply.

6-2 Incorrect Folding

  1. Please check whether the fold position is correct.

6-3 Power On, but No Start

  1. Check if the left safety cover is opened.
  2. Check if the right safety cover is opened.
  3. Check if the lower cassette is pushed all the way in.
  4. Check for any paper jams.

6-4 Frequent Double or Multiple Sheet Feeding

  1. Exchange all three rollers all at once. They are probably worn-out.
  2. Check whether the adhesive paper is too thick or strong.
  3. Check whether the forms are lighter than 16 lbs.
  4. Check whether the infeed tray guide is set correctly.

MyBinding.com 5500 NE Moore Court Hillsboro, OR 97124 Toll Free: 1-800-944-4573 Local: 503-640-5920

Page 29 of 33

Paitec MX11000 User Manual, page 30
Text on page 30

Chapter 7 - Conveyor (Optional)

Please attach the tray to the main body of the conveyor like the picture.

Place the conveyor on to the shaft like the picture.

Please attach the lower bracket like the picture.

Please loosen the screws and attach the side guide on both sides by using the same screws like the picture.

Please tighten the two screws to fix the conveyor to the main body.

Please attach the wheels on to the holder like the picture.

The conveyor wheel can be adjusted to accommodate different forms with different lengths. Please refer to the following pictures to correctly set the wheels to accommodate your form lengths.

Page 30 of 33

Paitec MX11000 User Manual, page 31
Text on page 31

This page intentionally left blank

MyBinding.com 5500 NE Moore Court Hillsboro, OR 97124 Toll Free: 1-800-944-4573 Local: 503-640-5920

Page 31 of 33

Paitec MX11000 User Manual, page 32
Text on page 32

Fold Settings

ES5000 - IM4000 - IM9500

ES2000 – ES9000 – MX9000 – MX13000

Size and Fold Type

Use V-Insert

Use V-Insert

Note: there are no standards for this format, measure your form for settings

To Identify Fold Position Number and Feed Direction

ES5000 - IM4000 - IM9500

Fold Type

Envelope Face (EF)

1st Fold

2nd Fold

2nd Fold

1st Fold

GLUE

2nd Fold

2nd Fold

1st Fold

1st Fold

GLUE

ES2000 – ES8000 – MX9000 – MX13000

EF = Envelope Face

1st Fold

1st Fold

GLUE

GLUE

Indicated settings are for the standard 14” EZ-Fold with two 5.25” and one 3.5” panels. These settings are for a correctly Mfg. 11” C-Fold form. The inside panel is shorter than the outside panels to avoid jamming during folding Rarely used, please measure your form as there is no standard for this size and format. Settings are for the 14” C-Fold form that creates a reply envelope when folded and sealed. Other configurations will vary. Not commonly used as this size will require additional postage if mailed

Page 32 of 33

Paitec MX11000 User Manual, page 33
Text on page 33

ES2000 ES8000 MX9000 MX13000

Folding Diagram

Z-Fold

C-Fold

V-Fold

Insert Folder Guide

80 mm 3.15 in

70 mm 2.75 in

255 mm 10 in

155 mm 6.1 in

MyBinding.com 5500 NE Moore Court Hillsboro, OR 97124 Toll Free: 1-800-944-4573 Local: 503-640-5920

Page 33 of 33 ยท End of manual

Quick start

  1. The folding unit is composed of rollers, cassettes and stoppers.
  2. The form enters in between the two front fold rollers.
  3. The form hits the upper cassette stopper and buckles in the middle. Then the folded portion enters in between the middle two rollers.

Troubleshooting

ProblemLikely causeFix (from the manual)
No powerThe power cable may not be connected properly, or there may be no power at the supply.Check that the power cable is properly connected. Check the power supply. Page 29
Incorrect foldingThe fold position may be wrong.Check whether the fold position is correct. Page 29
Power is on but the machine will not startA safety cover may be open, the lower cassette may not be fully in, or there may be a paper jam.Check that the left and right safety covers are closed. Push the lower cassette all the way in. Check for paper jams. Page 29
Frequent double or multiple sheet feedingThe rollers may be worn out, the adhesive paper may be too thick or strong, the forms may be lighter than 16 lbs, or the infeed tray guide may be set wrong.Exchange all three rollers at once. Check the adhesive paper, the form weight and the infeed tray guide setting. Page 29
Paper jam at the press unitA double feed or another cause has jammed forms in the press rollers.Press the jam free button first. If the jam stays, turn off the power and use the jam removal handle to turn the press rollers clockwise. Never run the machine with the handle set up. Page 26
Paper jam at the upper or lower cassetteForms are jammed in a cassette.For the upper cassette, open the safety cover, pull out the cassette and remove the paper. For the lower cassette, open its cover and remove the paper. Be careful not to damage the upper cassette. Page 26
Rollers are dirty and feed poorlyPressure seal forms leave paper dust, ink and toner residue on the rollers.Remove paper dust with a small air cleaner or dust remover. Clean the fold rollers with denatured alcohol on a soft cloth and use nothing else on them. Page 28

Frequently asked questions

Why does the machine stop after I switch to a different form?

The thickness sensor keeps the setting from the last form. A different paper can read as a double feed. Reset the thickness value each time you change forms. See page 12.

What form weight do the press rollers accept?

The press rollers are designed for 16 to 29 lb forms. Heavier forms may cause the machine to malfunction. See page 26.

What does the Jam Free button do?

It clears a jam in the press roller unit. It will not clear every jam. If it does not work, use the jam removal handle. See page 12.

Is the batch counter setting saved when I restart?

No. The batch counter setting is not stored after the machine is rebooted. See page 12.

What should I use to clean the fold rollers?

Use denatured alcohol on a soft cloth. Do not use any other substance because it may damage the rubber. See page 28.